Hi, Em Sex 29 Jun 2007, Phil Meyer escreveu: > Marcelo Magno T. Sales wrote: > > Hi, > > > > I have a Centrino Duo notebook which has an embedded card reader (for > > memory sticks, SD cards, XD cards, etc.). No card inserted in the reader > > is detected by Fedora. I was hoping that the new F7 kernel would support > > it, but the reader is still dead after the upgrade. > > lspci shows: > > (...) > > 05:03.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 > > SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) > > 05:03.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01) > > 05:03.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host > > Adapter (rev 0a) > > 05:03.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev > > 05) > > That is the exact same device in my laptop and it works great. > I have tried 1GB 2GB and 4GB regular SD cards. > I have NOT tried 8GB SDHC cards. > > What card are you trying? > > The driver in question is: mmc, which includes mmc_core and mmc_block. > Do the drivers load for you? Thanks for your answer. I have tried with 16 MB and 256 MB memory sticks and with a 1 GB XD card, none of which I was able to access. I'll try again when I get home and will check if the module is being loaded. > > Plug in a SD card and: > > # lsmod | grep mmc > > and > > dmesg | tail > > You should see something like this from dmesg: > > mmcblk0: mmc0:1234 SD04G 4018176KiB > mmcblk0: p1 > > > Good luck! -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
