On Wed, 2007-01-31 at 18:50 -0500, Jim Cornette wrote: > Beartooth wrote: > >su - > > > NOW lspci and lsmod work strait from the prompt, sure enough -- and lspci > > | grep -i net gives me (retyping) "00:09.0 Ethernet controller: Intel > > Corporation 82557/8/9 [Ethernet Pro 100] (rev 10)" -- and no mention of > > any other ethernet anything, 3c501 or otherwise. > > > > > The 3c501 could be removed. You might want to investigate whether the > Intel 82557/8/9 is supported and by what driver. Should be the "e100" driver. According to the source code: * I. General * * The driver supports Intel(R) 10/100 Mbps PCI Fast Ethernet * controller family, which includes the 82557, 82558, 82559, * 82550, 82551, and 82562 devices. 82558 and greater controllers * integrate the Intel 82555 PHY. The controllers are used in * server and client network interface cards, as well as in * LAN-On-Motherboard (LOM), CardBus, MiniPCI, and ICHx * configurations. 8255x supports a 32-bit linear addressing * mode and operates at 33Mhz PCI clock rate. So verify that the "e100" driver is loaded via "/sbin/lsmod". ---------------------------------------------------------------------- - Rick Stevens, Senior Systems Engineer rstevens@xxxxxxxxxxxxxxx - - VitalStream, Inc. http://www.vitalstream.com - - - - "And on the seventh day, He exited from append mode." - ----------------------------------------------------------------------
