On 12/4/06, Gilboa Davara <gilboad@xxxxxxxxx> wrote:
On Mon, 2006-12-04 at 17:01 +0800, Hadders wrote: > Hi, > Just to confirm, you're saying that the box has run fine for some > time, you've upgraded nothing (in terms of hardware), but now it's > started having problems? > > Corrupt RAM can cause all sorts of headaches, to help eliminate that, > I'd nip over to www.memtest.org, grab the latest bootable iso and run > that for a few hours. > > It's a good place to start. Plus, does lm_sesnros support your board? Run (as root) $ sensors-detect [8], let it try to find you i2c chipset and configure it - it should give you CPU/Chipset temperature/fan speed/voltage/etc. More-ever, configure smartd [8] to monitor the hard disk health and use smartctl [8] to check the current status. (Usually smartctl -a <device>) - Gilboa [8] means man 8 XXX.
Thanks for the help. I tried memory check but nothing is wrong with it. By the way this FC5 box is on Duron chip and guess the motherboard is also quite old. "sensor-detect" detects mostly the NVIDIA things only, not a thing about CPU/Chipset temp/fan speed. I guess its not supported. I guess something is wrong with my cable. I changed the cable and now its fine again. I used to leave this machine unattended for minimum of 3 days straight and its running without complain. I don't know if its going to show same thing again. Post it later if porblem occurs. Thanks again! -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
