Garry Williams wrote: > I just installed the latest kernel (2.6.18-1.2200.fc5smp) and now see > a 40 second time out on amy disk controller at boot time. This didn't > occur before the update (2.6.17-1.2187_FC5smp). > > Once the time out is over, the boot proceeds normally. Everything > else seems fine. > > Should I report a bug? Can I suppress the time out (whatever it is)? > i get the same problem, without resolution as of yet, on my dell optiplex sx280. > dmesg: > > Freeing unused kernel memory: 244k freed > Write protecting the kernel read-only data: 383k > Time: tsc clocksource has been installed. > SCSI subsystem initialized > libata version 2.00 loaded. > ata_piix 0000:00:1f.2: version 2.00 > ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 217 > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 217 > ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 217 > scsi0 : ata_piix > ata1.00: ATA-7, max UDMA/133, 156250000 sectors: LBA48 NCQ (depth 0/32) > ata1.00: ata1: dev 0 multi count 8 > ata1.00: configured for UDMA/133 > scsi1 : ata_piix > ata2: port is slow to respond, please be patient > ata2: port failed to respond (30 secs) > ata2: SRST failed (status 0xFF) > ata2: SRST failed (err_mask=0x100) > ata2: softreset failed, retrying in 5 secs > ata2: SRST failed (status 0xFF) > ata2: SRST failed (err_mask=0x100) > ata2: softreset failed, retrying in 5 secs > ata2: SRST failed (status 0xFF) > ata2: SRST failed (err_mask=0x100) > ata2: reset failed, giving up > Vendor: ATA Model: WDC WD800JD-75MS Rev: 10.0 > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > sda: sda1 sda2 sda3 < sda5 sda6 sda7 > > sd 0:0:0:0: Attached scsi disk sda > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > > $ lspci > 00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev > 02) > 00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics Port > (rev 02) > 00:02.0 VGA compatible controller: Intel Corporation 945G Integrated > Graphics Controller (rev 02) > 00:02.1 Display controller: Intel Corporation 945G Integrated Graphics > Controller (rev 02) > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express > Port 1 (rev 01) > 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express > Port 2 (rev 01) > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #1 (rev 01) > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #2 (rev 01) > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #3 (rev 01) > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #4 (rev 01) > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 > EHCI Controller (rev 01) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) > 00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 > Family) AC'97 Audio Controller (rev 01) > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC > Interface Bridge (rev 01) > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE > Controller (rev 01) > 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) > Serial ATA Storage Controllers cc=IDE (rev 01) > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller > (rev 01) > 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 > Gigabit Ethernet PCI Express (rev 01) > -- Anthony - http://messinet.com - http://messinet.com/~amessina/gallery 8F89 5E72 8DF0 BCF0 10BE 9967 92DC 35DC B001 4A4E
Attachment:
signature.asc
Description: OpenPGP digital signature
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
