> > >On Thu, 3 Aug 2006, Maccy wrote: > >> >> Folks, >> >> Just got a new 10TB file server with 2 3ware controllers giving me 2 x 5TB >> arrays. >> >> Have installed FC4 on it but after partitioning with parted I get endless >> amounts of ext2 fs errors. I've tried reconfiguring and initialising the >> arrays using 3ware tools but same result. The drives are all showing good >> health. fdisk is out due to the 2TB limitation. fsck and tune2fs throw out >> various inode/system block errors. >> >> I'd really rather not have to roll my own kernels for XFS/ReiserFS support >> and all my other disks are ext3 - I want to export these arrays to 100+ >> client systems. >> >> Can anyone recommend a better partitioning tool so I can get error-free ext3 >> filesystems on both arrays? >> >> Many thanks in advance for any advice, >> >> Mac >> >> -- >> fedora-list mailing list >> fedora-list@xxxxxxxxxx >> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list >> > >Yes, use parted or gparted to format and XFS on top of that :) > >If you use XFS though, use 2.6.17.7 or later, do not use 2.6.17-2.6.17.6 >(corruption bug). I'm about to hit a similar problem. As far as I understand things, with a 2.6 kernel, if you partition with parted and then mke2fs on those partitions, you should be OK in terms if the addressability of 5TB. What blocksize does 'dumpe2fs -h /dev/yourpartition' report? My guess is that it should be 4096 on a 5TB 'device'. Do you have a screendump of your parted stuff? Terry. -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
