On Mon, Jun 19, 2006 at 01:40:00PM +0300, Pasi Kärkkäinen wrote:
> On Mon, Jun 19, 2006 at 10:57:19AM +0100, Paul Howarth wrote:
> > >
> > >Hmm.. all of my files in the dd image look correct.
> > >
> > >In addition to the files above, I also have "pci.ids" file.
> > >FC5 installer will give
> > >"ERROR failed to open /tmp/drivers/pci.ids: No such file or directory"
> > >error if I don't have that file on the dd image.
> > >
> > >"pci.ids", "pcitable" and "modules.pcimap" contain correct pci/device ids
> > >(verified with lspci - and those files are taken from "official" qlogic
> > >rhel4 qla4xxx dd image)
> > >
> > >$ ls -l
> > >total 593
> > >-rwxr-xr-x 1 root root 85 Jun 15 14:22 modinfo
> > >-rwxr-xr-x 1 root root 603405 Jun 16 12:48 modules.cgz
> > >-rwxr-xr-x 1 root root 35 Jun 15 13:25 modules.dep
> > >-rwxr-xr-x 1 root root 273 Jun 15 13:34 modules.pcimap
> > >-rwxr-xr-x 1 root root 106 Jun 19 11:22 pci.ids
> > >-rwxr-xr-x 1 root root 192 Jun 15 13:25 pcitable
> > >-rwxr-xr-x 1 root root 41 Jun 15 13:27 rhdd
> > >
> > >$ cat modinfo
> > >Version 0
> > >qla4xxx
> > > scsi
> > > "Updated qla4xxx driver (5.00.04-d5) for 2.6.15-1.2054_FC5"
> > >
> > >$ cat modules.dep
> > >qla4xxx: scsi_mod
> > >sd_mod: scsi_mod
> > >
> > >$ cat modules.pcimap
> > >qla4xxx 0x00001077 0x00004010 0xffffffff 0xffffffff
> > >0x00000000 0x00000000 0x0
> > >qla4xxx 0x00001077 0x00004022 0xffffffff 0xffffffff
> > >0x00000000 0x00000000 0x0
> > >qla4xxx 0x00001077 0x00004000 0xffffffff 0xffffffff
> > >0x00000000 0x00000000 0x0
> > >
> > >$ cat pci.ids
> > >1077 QLogic Corp.
> > > 4010 QLA4010 iSCSI Adapter
> > > 4022 QLA4022 iSCSI Adapter
> > > 4000 QLA4000 iSCSI Adapter
> > >
> > >$ cat pcitable
> > >0x1077 0x4000 "qla4xxx" "QLogic Corp.|QLA4000 iSCSI-AL Adapter"
> > >0x1077 0x4010 "qla4xxx" "QLogic Corp.|QLA4010 iSCSI-AL Adapter"
> > >0x1077 0x4022 "qla4xxx" "QLogic Corp.|QLA4022 iSCSI-AL Adapter"
> > >
> > >$ cat rhdd
> > >Fedora Core 5 qla4xxx driver update disk
> > >
> > >modules.cgz:
> > >$ ls -l 2*/*/*
> > >-rw-r--r-- 1 root root 1325007 Jun 19 11:39
> > >2.6.15-1.2054_FC5/i586/qla4xxx.ko
> > >-rw-r--r-- 1 root root 168288 Jun 19 11:39
> > >2.6.15-1.2054_FC5/i686/qla4xxx.ko
> > >-rw-r--r-- 1 root root 173628 Jun 19 11:39
> > >2.6.15-1.2054_FC5smp/i686/qla4xxx.ko
> > >
> > >
> > >fs of the dd image is vfat. FC5 installer didn't seem to like ext2.
> > >
> > >Hmm.. that i586 module seems to be a lot bigger than the i686 versions..
> > >i586 version is compiled by hand, i686 versions are compiled automatically
> > >by ddiskit.
> >
> > ddiskit probably strips the module.
> > Try: strip -g 2.6.15-1.2054_FC5/i586/qla4xxx.ko
> >
>
> Yep.
>
> > >
> > >But anyway, FC5 installer doesn't like this image. It starts to read the
> > >floppy ("Reading driver disk"), but it won't load the module. No errors in
> > >the VC3.
> > >In VC3 I see only this:
> > >"INFO trying to mount sdb"
> > >"INFO modules to insert"
> > >"INFO load module set done"
> > >
> > >When I manually extract the i586 qla4xxx.ko from the dd image, I can load
> > >it
> > >fine with insmod..
> > >
> > >Any ideas? For some reason the installer doesn't even try to load the
> > >qla4xxx module..
> >
> > Are you sure your actual hardware matches one of the PCI IDs listed?
> > What's the output of "lspci -n"?
> >
>
> Yep, it does match. Verified with lspci -n.
>
> And I'm able to install centos 4.3 with similar selfmade dd image to the same box..
>
> I'm currently reading the anaconda installer sources to find out what's
> happening.. anaconda/loader2/driverdisk.c
>
case DEV_PROBE: {
struct device ** devices;
/* if they didn't specify that we should probe, then we should
* just fall out */
if (noprobe) {
stage = DEV_DONE;
break;
}
busProbe(modInfo, modLoaded, *modDepsPtr, 0);
devices = probeDevices(class, BUS_UNSPEC, PROBE_LOADED);
if (devices)
for(; devices[found]; found++);
if (found > before) {
stage = DEV_DONE;
break;
}
/* we don't have any more modules of the proper class. ask
* them to manually load */
rc = newtWinTernary(_("Error"), _("Manually choose"),
_("Continue"), _("Load another disk"),
_("No devices of the appropriate type were "
"found on this driver disk. Would you "
"like to manually select the driver, "
"continue anyway, or load another "
"driver disk?"));
That's the error I get.. which means probeDevices() did not find anything..
Trying to figure out why that happens..
-- Pasi
^
. .
Linux
/ - \
Choice.of.the
.Next.Generation.
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
