Pasi Kärkkäinen wrote:
On Mon, Jun 19, 2006 at 10:57:19AM +0100, Paul Howarth wrote:
Hmm.. all of my files in the dd image look correct.
In addition to the files above, I also have "pci.ids" file.
FC5 installer will give
"ERROR failed to open /tmp/drivers/pci.ids: No such file or directory"
error if I don't have that file on the dd image.
"pci.ids", "pcitable" and "modules.pcimap" contain correct pci/device ids
(verified with lspci - and those files are taken from "official" qlogic
rhel4 qla4xxx dd image)
$ ls -l
total 593
-rwxr-xr-x 1 root root 85 Jun 15 14:22 modinfo
-rwxr-xr-x 1 root root 603405 Jun 16 12:48 modules.cgz
-rwxr-xr-x 1 root root 35 Jun 15 13:25 modules.dep
-rwxr-xr-x 1 root root 273 Jun 15 13:34 modules.pcimap
-rwxr-xr-x 1 root root 106 Jun 19 11:22 pci.ids
-rwxr-xr-x 1 root root 192 Jun 15 13:25 pcitable
-rwxr-xr-x 1 root root 41 Jun 15 13:27 rhdd
$ cat modinfo
Version 0
qla4xxx
scsi
"Updated qla4xxx driver (5.00.04-d5) for 2.6.15-1.2054_FC5"
$ cat modules.dep
qla4xxx: scsi_mod
sd_mod: scsi_mod
$ cat modules.pcimap
qla4xxx 0x00001077 0x00004010 0xffffffff 0xffffffff
0x00000000 0x00000000 0x0
qla4xxx 0x00001077 0x00004022 0xffffffff 0xffffffff
0x00000000 0x00000000 0x0
qla4xxx 0x00001077 0x00004000 0xffffffff 0xffffffff
0x00000000 0x00000000 0x0
$ cat pci.ids
1077 QLogic Corp.
4010 QLA4010 iSCSI Adapter
4022 QLA4022 iSCSI Adapter
4000 QLA4000 iSCSI Adapter
$ cat pcitable
0x1077 0x4000 "qla4xxx" "QLogic Corp.|QLA4000 iSCSI-AL Adapter"
0x1077 0x4010 "qla4xxx" "QLogic Corp.|QLA4010 iSCSI-AL Adapter"
0x1077 0x4022 "qla4xxx" "QLogic Corp.|QLA4022 iSCSI-AL Adapter"
$ cat rhdd
Fedora Core 5 qla4xxx driver update disk
modules.cgz:
$ ls -l 2*/*/*
-rw-r--r-- 1 root root 1325007 Jun 19 11:39
2.6.15-1.2054_FC5/i586/qla4xxx.ko
-rw-r--r-- 1 root root 168288 Jun 19 11:39
2.6.15-1.2054_FC5/i686/qla4xxx.ko
-rw-r--r-- 1 root root 173628 Jun 19 11:39
2.6.15-1.2054_FC5smp/i686/qla4xxx.ko
fs of the dd image is vfat. FC5 installer didn't seem to like ext2.
Hmm.. that i586 module seems to be a lot bigger than the i686 versions..
i586 version is compiled by hand, i686 versions are compiled automatically
by ddiskit.
ddiskit probably strips the module.
Try: strip -g 2.6.15-1.2054_FC5/i586/qla4xxx.ko
Yep.
But anyway, FC5 installer doesn't like this image. It starts to read the
floppy ("Reading driver disk"), but it won't load the module. No errors in
the VC3.
In VC3 I see only this:
"INFO trying to mount sdb"
"INFO modules to insert"
"INFO load module set done"
When I manually extract the i586 qla4xxx.ko from the dd image, I can load
it
fine with insmod..
Any ideas? For some reason the installer doesn't even try to load the
qla4xxx module..
Are you sure your actual hardware matches one of the PCI IDs listed?
What's the output of "lspci -n"?
Yep, it does match. Verified with lspci -n.
And I'm able to install centos 4.3 with similar selfmade dd image to the same box..
I'm currently reading the anaconda installer sources to find out what's
happening.. anaconda/loader2/driverdisk.c
Good ideas very welcome.. :)
Given that your driver disk building process seems OK judging by the
success on Centos 4.3, this may be worth a bugzilla ticket on FC5
anaconda; you might get some help from the "other side of the fence"
that way.
Paul.
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
