I've experienced this. On the machine that has the shared printers, what have you done to open up the firewall and liberate permissions in /etc/hosts.deny and /etc/hosts.allow? If you dont have an opening, that print job from the other system can't get in. On 6/3/06, Antonio Montagnani <antonio.montagnani@xxxxxxxxx> wrote:
2006/6/3, Antonio Montagnani <antonio.montagnani@xxxxxxxxx>: > 2006/6/2, Antonio Montagnani <antonio.montagnani@xxxxxxxxx>: > > 2006/6/2, Thomas Taylor <linxt@xxxxxxxxxxx>: > > > On Thursday 01 June 2006 15:16, Antonio Montagnani wrote: > > > > I told to my laptop to use shared printers (via Cup/IPP) connected to > > > > my desktop. > > > > When I send a test page from printer configuration tool nothing is > > > > printed and i get the following message.: > > > > > > > > 02/Jun/2006:00:05:16 +0200] Adding start banner page "none" to job 598. > > > > I [02/Jun/2006:00:05:16 +0200] Adding end banner page "none" to job 598. > > > > I [02/Jun/2006:00:05:16 +0200] Job 598 queued on "EpsonC70" by "root". > > > > W [02/Jun/2006:00:05:35 +0200] [Job 130] Network host '192.168.0.1' is > > > > busy, down, or unreachable; will retry in 30 seconds... > > > > > > > > I am lost as I have a twin similar system in the office where my > > > > laptop (192.168.0.5) can print to my desktop (192.168.0.1) (and both > > > > have iptables with exactly same rules ....no rule for CUP), and I > > > > can't get out of the problem. > > > > > > > > >From this point, what shall I look into?? > > > > > > > > CUPS is always a pain for newbies... > > > > -- > > > > Antonio Montagnani > > > > Skype : antoniomontag > > > > > > CUPS has set up a que for your Epson C70 printer but it's not being addressed > > > properly. > > > > > > Is this a network at your home or at your work? > > > If it's at home, are you trying to print to the printer at home or at work? > > > Please show contents of etc/cups/printers.conf, etc/hosts, etc/hosts/allow and > > > etc/hosts/deny > > > > > > Tom > > > > > > -- > > > Tom Taylor > > > Linux user #263467 > > > Federal Way, WA > > > > > > > > > > > Tnx TOM > > > > > > I switched on the client machine, and immediately checked var/log/cups/error_log > Please check it: > what does message at 7:07:23 about setting ACL means?? > Any other comment welcome. > > > [03/Jun/2006:07:07:22 +0200] "AuthClass System" is deprecated; > consider using "Require @SYSTEM" on line 838. > I [03/Jun/2006:07:07:22 +0200] Listening to 127.0.0.1:631 (IPv4) > I [03/Jun/2006:07:07:22 +0200] Loaded configuration file "/etc/cups/cupsd.conf" > I [03/Jun/2006:07:07:22 +0200] Cleaning out old temporary files in > "/var/spool/cups/tmp"... > I [03/Jun/2006:07:07:22 +0200] Configured for up to 100 clients. > I [03/Jun/2006:07:07:22 +0200] Allowing up to 100 client connections per host. > I [03/Jun/2006:07:07:22 +0200] Creating CUPS default administrative policy: > I [03/Jun/2006:07:07:22 +0200] <Policy default> > I [03/Jun/2006:07:07:22 +0200] <Limit Send-Document Send-URI > Cancel-Job Hold-Job Release-Job Restart-Job Purge-Jobs > Set-Job-Attributes Create-Job-Subscription Renew-Subscription > Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job > Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Authenticate-Job> > I [03/Jun/2006:07:07:22 +0200] Order Deny,Allow > I [03/Jun/2006:07:07:22 +0200] Require user @OWNER @SYSTEM > I [03/Jun/2006:07:07:22 +0200] </Limit> > I [03/Jun/2006:07:07:22 +0200] <Limit Pause-Printer Resume-Printer > Set-Printer-Attributes Enable-Printer Disable-Printer > Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs > Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer > Startup-Printer Promote-Job Schedule-Job-After CUPS-Add-Printer > CUPS-Delete-Printer CUPS-Add-Class CUPS-Delete-Class CUPS-Accept-Jobs > CUPS-Reject-Jobs CUPS-Set-Default> > I [03/Jun/2006:07:07:22 +0200] Order Deny,Allow > I [03/Jun/2006:07:07:22 +0200] AuthType Basic > I [03/Jun/2006:07:07:22 +0200] Require user @SYSTEM > I [03/Jun/2006:07:07:22 +0200] </Limit> > I [03/Jun/2006:07:07:22 +0200] <Limit All> > I [03/Jun/2006:07:07:22 +0200] Order Deny,Allow > I [03/Jun/2006:07:07:22 +0200] </Limit> > I [03/Jun/2006:07:07:22 +0200] </Policy> > I [03/Jun/2006:07:07:22 +0200] Full reload is required. > I [03/Jun/2006:07:07:22 +0200] Loaded MIME database from '/etc/cups': > 33 types, 38 filters... > I [03/Jun/2006:07:07:23 +0200] Loading job cache file > "/var/cache/cups/job.cache"... > I [03/Jun/2006:07:07:23 +0200] Full reload complete. > I [03/Jun/2006:07:07:23 +0200] Listening to 127.0.0.1:631 on fd 0... > E [03/Jun/2006:07:07:23 +0200] Unable to set ACLs on root certificate > "/var/run/cups/certs/0" - Operation not supported > I [03/Jun/2006:07:07:23 +0200] Started filter > /usr/lib/cups/filter/pstops (PID 1888) for job 130. > I [03/Jun/2006:07:07:23 +0200] Started filter > /usr/lib/cups/filter/pstoraster (PID 1889) for job 130. > I [03/Jun/2006:07:07:23 +0200] Started filter > /usr/lib/cups/filter/rastertoepson (PID 1891) for job 130. > I [03/Jun/2006:07:07:23 +0200] Started backend > /usr/lib/cups/backend/lpd (PID 1892) for job 130. > E [03/Jun/2006:07:07:23 +0200] PID 1888 (/usr/lib/cups/filter/pstops) > stopped with status 1! > I [03/Jun/2006:07:07:23 +0200] Hint: Try setting the LogLevel to > "debug" to find out more. > E [03/Jun/2006:07:07:23 +0200] [Job 130] Unable to open print file > "/var/spool/cups/d00130-001" - Permission denied > E [03/Jun/2006:07:07:26 +0200] [Job 130] No pages found! > E [03/Jun/2006:07:07:26 +0200] PID 1891 > (/usr/lib/cups/filter/rastertoepson) stopped with status 1! > I [03/Jun/2006:07:07:26 +0200] Hint: Try setting the LogLevel to > "debug" to find out more. > W [03/Jun/2006:07:07:26 +0200] [Job 130] Network host '192.168.0.1' is > busy, down, or unreachable; will retry in 30 seconds... > W [03/Jun/2006:07:07:55 +0200] [Job 130] Network host '192.168.0.1' is > busy, down, or unreachable; will retry in 30 seconds... > W [03/Jun/2006:07:08:25 +0200] [Job 130] Network host '192.168.0.1' is > busy, down, or unreachable; will retry in 30 seconds... > W [03/Jun/2006:07:08:55 +0200] [Job 130] Network host '192.168.0.1' is > busy, down, or unreachable; will retry in 30 seconds... > W [03/Jun/2006:07:09:25 +0200] [Job 130] Network host '192.168.0.1' is > busy, down, or unreachable; will retry in 30 seconds... > W [03/Jun/2006:07:09:55 +0200] [Job 130] Network host '192.168.0.1' is > busy, down, or unreachable; will retry in 30 seconds... > > -- > Antonio Montagnani > Skype : antoniomontag > a good clue is that I cannot see the shared printers in the printers configuration tool on the satellite machine...any idea, I am googling but I hope that an answer comes from this list!!! -- Antonio Montagnani Skype : antoniomontag -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
-- Paul E. Johnson Professor, Political Science 1541 Lilac Lane, Room 504 University of Kansas -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
