Re: FC5 Struggling with printers shares

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2006/6/3, Antonio Montagnani <antonio.montagnani@xxxxxxxxx>:
2006/6/2, Antonio Montagnani <antonio.montagnani@xxxxxxxxx>:
> 2006/6/2, Thomas Taylor <linxt@xxxxxxxxxxx>:
> > On Thursday 01 June 2006 15:16, Antonio Montagnani wrote:
> > > I told to my laptop to use shared printers (via Cup/IPP) connected to
> > > my desktop.
> > > When I send a test page from printer configuration tool nothing is
> > > printed and i get the following message.:
> > >
> > > 02/Jun/2006:00:05:16 +0200] Adding start banner page "none" to job 598.
> > > I [02/Jun/2006:00:05:16 +0200] Adding end banner page "none" to job 598.
> > > I [02/Jun/2006:00:05:16 +0200] Job 598 queued on "EpsonC70" by "root".
> > > W [02/Jun/2006:00:05:35 +0200] [Job 130] Network host '192.168.0.1' is
> > > busy, down, or unreachable; will retry in 30 seconds...
> > >
> > > I am lost as I have a twin similar system in the office where my
> > > laptop (192.168.0.5) can print to my desktop (192.168.0.1)  (and both
> > > have iptables with exactly same rules ....no rule for CUP), and I
> > > can't get out of the problem.
> > >
> > > >From this point, what shall I look into??
> > >
> > > CUPS is always a pain for newbies...
> > > --
> > > Antonio Montagnani
> > > Skype : antoniomontag
> >
> > CUPS has set up a que for your Epson C70 printer but it's not being addressed
> > properly.
> >
> > Is this a network at your home or at your work?
> > If it's at home, are you trying to print to the printer at home or at work?
> > Please show contents of etc/cups/printers.conf, etc/hosts, etc/hosts/allow and
> >     etc/hosts/deny
> >
> > Tom
> >
> > --
> > Tom Taylor
> > Linux user #263467
> > Federal Way, WA
> >
> >
> >
> Tnx TOM
>
>

I switched on the client machine, and immediately checked var/log/cups/error_log
Please check it:
what does message at 7:07:23 about setting ACL means??
Any other comment welcome.


[03/Jun/2006:07:07:22 +0200] "AuthClass System" is deprecated;
consider using "Require @SYSTEM" on line 838.
I [03/Jun/2006:07:07:22 +0200] Listening to 127.0.0.1:631 (IPv4)
I [03/Jun/2006:07:07:22 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [03/Jun/2006:07:07:22 +0200] Cleaning out old temporary files in
"/var/spool/cups/tmp"...
I [03/Jun/2006:07:07:22 +0200] Configured for up to 100 clients.
I [03/Jun/2006:07:07:22 +0200] Allowing up to 100 client connections per host.
I [03/Jun/2006:07:07:22 +0200] Creating CUPS default administrative policy:
I [03/Jun/2006:07:07:22 +0200] <Policy default>
I [03/Jun/2006:07:07:22 +0200] <Limit Send-Document Send-URI
Cancel-Job Hold-Job Release-Job Restart-Job Purge-Jobs
Set-Job-Attributes Create-Job-Subscription Renew-Subscription
Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job
Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Authenticate-Job>
I [03/Jun/2006:07:07:22 +0200] Order Deny,Allow
I [03/Jun/2006:07:07:22 +0200] Require user @OWNER @SYSTEM
I [03/Jun/2006:07:07:22 +0200] </Limit>
I [03/Jun/2006:07:07:22 +0200] <Limit Pause-Printer Resume-Printer
Set-Printer-Attributes Enable-Printer Disable-Printer
Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs
Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer
Startup-Printer Promote-Job Schedule-Job-After CUPS-Add-Printer
CUPS-Delete-Printer CUPS-Add-Class CUPS-Delete-Class CUPS-Accept-Jobs
CUPS-Reject-Jobs CUPS-Set-Default>
I [03/Jun/2006:07:07:22 +0200] Order Deny,Allow
I [03/Jun/2006:07:07:22 +0200] AuthType Basic
I [03/Jun/2006:07:07:22 +0200] Require user @SYSTEM
I [03/Jun/2006:07:07:22 +0200] </Limit>
I [03/Jun/2006:07:07:22 +0200] <Limit All>
I [03/Jun/2006:07:07:22 +0200] Order Deny,Allow
I [03/Jun/2006:07:07:22 +0200] </Limit>
I [03/Jun/2006:07:07:22 +0200] </Policy>
I [03/Jun/2006:07:07:22 +0200] Full reload is required.
I [03/Jun/2006:07:07:22 +0200] Loaded MIME database from '/etc/cups':
33 types, 38 filters...
I [03/Jun/2006:07:07:23 +0200] Loading job cache file
"/var/cache/cups/job.cache"...
I [03/Jun/2006:07:07:23 +0200] Full reload complete.
I [03/Jun/2006:07:07:23 +0200] Listening to 127.0.0.1:631 on fd 0...
E [03/Jun/2006:07:07:23 +0200] Unable to set ACLs on root certificate
"/var/run/cups/certs/0" - Operation not supported
I [03/Jun/2006:07:07:23 +0200] Started filter
/usr/lib/cups/filter/pstops (PID 1888) for job 130.
I [03/Jun/2006:07:07:23 +0200] Started filter
/usr/lib/cups/filter/pstoraster (PID 1889) for job 130.
I [03/Jun/2006:07:07:23 +0200] Started filter
/usr/lib/cups/filter/rastertoepson (PID 1891) for job 130.
I [03/Jun/2006:07:07:23 +0200] Started backend
/usr/lib/cups/backend/lpd (PID 1892) for job 130.
E [03/Jun/2006:07:07:23 +0200] PID 1888 (/usr/lib/cups/filter/pstops)
stopped with status 1!
I [03/Jun/2006:07:07:23 +0200] Hint: Try setting the LogLevel to
"debug" to find out more.
E [03/Jun/2006:07:07:23 +0200] [Job 130] Unable to open print file
"/var/spool/cups/d00130-001" - Permission denied
E [03/Jun/2006:07:07:26 +0200] [Job 130] No pages found!
E [03/Jun/2006:07:07:26 +0200] PID 1891
(/usr/lib/cups/filter/rastertoepson) stopped with status 1!
I [03/Jun/2006:07:07:26 +0200] Hint: Try setting the LogLevel to
"debug" to find out more.
W [03/Jun/2006:07:07:26 +0200] [Job 130] Network host '192.168.0.1' is
busy, down, or unreachable; will retry in 30 seconds...
W [03/Jun/2006:07:07:55 +0200] [Job 130] Network host '192.168.0.1' is
busy, down, or unreachable; will retry in 30 seconds...
W [03/Jun/2006:07:08:25 +0200] [Job 130] Network host '192.168.0.1' is
busy, down, or unreachable; will retry in 30 seconds...
W [03/Jun/2006:07:08:55 +0200] [Job 130] Network host '192.168.0.1' is
busy, down, or unreachable; will retry in 30 seconds...
W [03/Jun/2006:07:09:25 +0200] [Job 130] Network host '192.168.0.1' is
busy, down, or unreachable; will retry in 30 seconds...
W [03/Jun/2006:07:09:55 +0200] [Job 130] Network host '192.168.0.1' is
busy, down, or unreachable; will retry in 30 seconds...

--
Antonio Montagnani
Skype : antoniomontag


a good clue is that I cannot see the shared printers in the printers
configuration tool on the satellite machine...any idea, I am googling
but I hope that an answer comes from this list!!!

--
Antonio Montagnani
Skype : antoniomontag

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
[Index of Archives]     [Older Fedora Users]     [Fedora Announce]     [Fedora Package Announce]     [EPEL Announce]     [Fedora Magazine]     [Fedora News]     [Fedora Summer Coding]     [Fedora Laptop]     [Fedora Cloud]     [Fedora Advisory Board]     [Fedora Education]     [Fedora Security]     [Fedora Scitech]     [Fedora Robotics]     [Fedora Maintainers]     [Fedora Infrastructure]     [Fedora Websites]     [Anaconda Devel]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [Fedora Fonts]     [ATA RAID]     [Fedora Marketing]     [Fedora Management Tools]     [Fedora Mentors]     [SSH]     [Fedora Package Review]     [Fedora R Devel]     [Fedora PHP Devel]     [Kickstart]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Fedora Legal]     [Fedora Kernel]     [Fedora OCaml]     [Coolkey]     [Virtualization Tools]     [ET Management Tools]     [Yum Users]     [Tux]     [Yosemite News]     [Gnome Users]     [KDE Users]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]     [Fedora Sparc]     [Fedora Universal Network Connector]     [Libvirt Users]     [Fedora ARM]

  Powered by Linux