I have this very weird problem, that I have noticed some 2 or 3 days ago, and of a kind I have never heard before. I made a post in fedora.forum (http://forums.fedoraforum.org/showthread.php?t=259047), but get no awswer since then, and now I have been advised to post here too.
Briefly, the problem is that the copy speed between the partition in which I am running my Fedora and another partition where I store backup data is now 50K/s, which is extremely slow by any standart (it has been usually around 10M/s, almost 200 times faster). This is for exemple much lower than the copy speed between my computers in my lab and home, via internet, which is obviously absurd. I have been using Fedora 64 for many years, and this is the first time I have a problem that I cannot solve by myself, which is very frustrating. Let me proceed with the details.
My laptop is a HP Pavillion Dv7 2080 ep, in which I have two disks of 250G each. One of the disks is partitioned between two operational systems, Fedora 14 64 and Windows 7 64, and the other disk contains the above referred partition where I store my backups (I call it backup disk). The problem happens when I try to copy anything from my home in Fedora to the backup disk, and also when, while using fedora, I try to move data within the backup disk itself. I first thought it could be a hardware problem in the backup disk. Then I login into the windows and made a copy of some AVI files (3G approx) to the backup disk, which went normally, within a few seconds, thus eliminating this possibility. I move data within the backup iself disk using windows also without any problem. I try therefore to make the inverse process, a copy from the backup disk into my home folder in Fedora. It went normally, copying 4 G also within few seconds, actually with an excellent speed of 50M/s.
After searching in google, I saw some people also complaining of slow copy speed (although they had 7M/s, more than 100 times faster than what I have now), and one cause could be that the source file system (in my case the Fedora home folder) would be near its full capacity. I therefore eliminate everything that I could, around 15G, and now I have like 20G of free disk space, which I think is more than enough for everything. The problem, however, persists. Some people also said that it could be the type of files and/or amount of data. I therefore tried several kinds of files (from raw data files to AVI and RMVB regular video files), and several amounts of data (from single files with a few Megas to folders with 20G) and in all cases I had the same unacceptably low copy speed of 50K/s. Another possibility was checking the disk via the command line "hdparm", but since I am not an expert I could not identify anything wrong from its output. Anyway, here it is for both disks (/dev/sda and /dev/sdb):
[root@localhost ~]# hdparm -Tt /dev/sda
/dev/sda:
Timing cached reads: 11320 MB in 1.99 seconds = 5681.38 MB/sec
Timing buffered disk reads: 204 MB in 3.02 seconds = 67.52 MB/sec
[root@localhost ~]# hdparm /dev/sda
/dev/sda:
multcount = 0 (off)
IO_support = 1 (32-bit)
readonly = 0 (off)
readahead = 256 (on)
geometry = 30401/255/63, sectors = 488397168, start = 0
[root@localhost ~]# hdparm -Tt /dev/sdb
/dev/sdb:
Timing cached reads: 12044 MB in 1.99 seconds = 6046.50 MB/sec
Timing buffered disk reads: 206 MB in 3.00 seconds = 68.57 MB/sec
[root@localhost ~]# hdparm /dev/sdb
/dev/sdb:
multcount = 0 (off)
IO_support = 1 (32-bit)
readonly = 0 (off)
readahead = 256 (on)
geometry = 30401/255/63, sectors = 488397168, start = 0
/dev/sda:
Timing cached reads: 11320 MB in 1.99 seconds = 5681.38 MB/sec
Timing buffered disk reads: 204 MB in 3.02 seconds = 67.52 MB/sec
[root@localhost ~]# hdparm /dev/sda
/dev/sda:
multcount = 0 (off)
IO_support = 1 (32-bit)
readonly = 0 (off)
readahead = 256 (on)
geometry = 30401/255/63, sectors = 488397168, start = 0
[root@localhost ~]# hdparm -Tt /dev/sdb
/dev/sdb:
Timing cached reads: 12044 MB in 1.99 seconds = 6046.50 MB/sec
Timing buffered disk reads: 206 MB in 3.00 seconds = 68.57 MB/sec
[root@localhost ~]# hdparm /dev/sdb
/dev/sdb:
multcount = 0 (off)
IO_support = 1 (32-bit)
readonly = 0 (off)
readahead = 256 (on)
geometry = 30401/255/63, sectors = 488397168, start = 0
It seems therefore to be a problem in the software, caused by the updates, since until 10 days ago it was everything ok. However, I usually make the updates whenever they appear but make my backups much less frequently. Therefore I don't know for sure what has changed in Fedora through the updates since the last backup I made, when everything was working fine.
He is the line of my /etc/fstab file which defines my backup disk, with the label common
LABEL=common /home/vinicius/Desktop/common ntfs auto,user,sync 0 0
Thank you all for your attention and please apologise me for the huge text.
_______________________________________________ laptop mailing list laptop@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/laptop
