Hello Peter,On Mon, 30 Sept 2024 at 14:12, Andreas Reschke via arm <arm@xxxxxxxxxxxxxxxxxxxxxxx> wrote:Am 30.09.24 um 13:52 schrieb Peter Robinson via arm: Hello Peter, sorry for the delay. Here's my enviroment: Rock5b with - Radxa Wireless Module A8 - Radxa PowerPower PD 30W - 1 TB NVME, no EMMC-Card - your bootloader u-boot-rockchip-spi.bin flashed to SPI - Fedora 41 Beta on NVME I've tested Armbian_24.8.1_Rock-5b_jammy_current_6.10.6_kde-neon-kisak_desktop.img.xz and and other *img.xz Image to boot on this system: no success. It only boots installed Fedora 41 Beta system. I don't care about Armbian, I have no idea what they put on their images, Armbian is off topic for this list. Only images which comes as iso image are bootable. Output via serial console. I have to search for a bootable image with support for /dev/mtdblock0 What Fedora images did you test? What do you mean by "bootable image with support for mtdblock0"? You should be able to reflash from the U-Boot shell. You're right with reflash from U-Boot shell, but I couldn't manage it. How do I get u-boot-rockchip-spi.bin or another SPI Image to the mmc card and load it ? >From the U-Boot menu I choose Exit but => ls mmc 1:1 0 file(s), 0 dir(s) => Could I get a little bit of help to go further ?Did you copy it from a running system to get it on there? What did you try? Is it on mmc0?
I've done these commands :
On my F40 PC (x86_64)
1. dnf install https://download.copr.fedorainfracloud.org/results/pbrobinson/u-boot/fedora-40-aarch64/08101731-uboot-tools/uboot-images-copr-2024.10-0.9.rc6.fc40.noarch.rpm
2. dd if=/usr/share/uboot/rock5b-rk3588/u-boot-rockchip.bin of=/dev/mmcblk3 seek=64
3. put this SD card into Rock 5B
4. boot up, but still stopp
Type [C-a]
[C-h] to see available commands
Terminal ready
DDR 9fffbe1e78 cym 24/02/04-10:09:20,fwver: v1.16
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8
Size=4096MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8
Size=4096MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8
Size=4096MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8
Size=4096MB
Manufacturer ID:0x6
CH0 RX Vref:26.7%, TX Vref:25.8%,26.8%
CH1 RX Vref:27.9%, TX Vref:26.8%,26.8%
CH2 RX Vref:25.8%, TX Vref:26.8%,25.8%
CH3 RX Vref:27.1%, TX Vref:24.8%,24.8%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-g5f53abfa1e-221223 #zzz (Dec 26 2022 -
09:10:09)
Trying to boot from MMC2
No misc partition
Trying fit image at 0x800 sector
Not fit magic
Trying fit image at 0x1800 sector
Not fit magic
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(5100a94e15...) + OK
## Checking u-boot 0x00a00000 ... sha256(d1b4d92055...) + OK
## Checking fdt-1 0x00ae9030 ... sha256(20e6d8e7d1...) + OK
## Checking atf-2 0x0005e000 ... sha256(a7ac2311a4...) + OK
## Checking atf-3 0xff100000 ... sha256(f294135184...) + OK
Jumping to U-Boot(0x00a00000) via ARM Trusted
Firmware(0x00040000)
Total: 720.978 ms
NOTICE: BL31: v2.10.0(release):
NOTICE: BL31: Built : 00:00:00, May 31 2024
U-Boot 2024.10-rc6 (Oct 02 2024 - 00:00:00 +0000)
Model: Radxa ROCK 5B
DRAM: 16 GiB
Core: 355 devices, 33 uclasses, devicetree: separate
MMC: mmc@fe2c0000: 1, mmc@fe2d0000: 2, mmc@fe2e0000: 0
Loading Environment from nowhere... OK
In: serial@feb50000
Out: serial@feb50000
Err: serial@feb50000
Model: Radxa ROCK 5B
Net: No ethernet found.
starting USB...
Bus usb@fc800000: USB EHCI 1.00
Bus usb@fc840000:
Greetings
Andreas
-- _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
