Hey Folks, So we've had issues with officially supporting a number of different platforms in Fedora directly and for a while I have been pondering how we can better enable these platforms to work better on Fedora. This isn't limited to rk35xx by any means, it's merely the first platforms I took the time to look at. What I've come up with is a copr repo with builds for those platforms that are very similar to the experience you get from the official Fedora builds. I am still working out the best way to integrate this with arm-image-iinstaller to make the experience as straight forward as possible. To try it you can do: dnf copr enable pbrobinson/u-boot; dnf install uboot-images-copr So with this first round it should work with 22 rk3588 based boards. I've actively tested the Rock5B (both mmc/SPI). To write a mSD card you can use the dd command below, for SPI the process is basically the same as the Pinebook Pro [1]. sudo dd if=/usr/share/uboot/rock5b-rk3588/u-boot-rockchip.bin of=/dev/XXX seek=64 There are rk356x builds as well but they currently have an issue and while you get the early firmware and initial Fedora the boot doesn't complete. I am working to fix this problem with the vendor. So at the moment they shouldn't be used. I look forward to hearing feedback and suggestions for improvement. I'm looking to add some TI devices as well, from there we'll see where this goes. Regards, Peter [1] https://nullr0ute.com/2021/05/fedora-on-the-pinebook-pro/ -- _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
