On Wed, 2019-01-23 at 16:13 +0800, Zamir Sun wrote: > On Wed, Jan 23, 2019 at 12:08 PM Peter Robinson <pbrobinson@xxxxxxxxx > > wrote: > > Hi, > > > > > I have a pinebook (running anarsoul's arch mainline[1]) and I was > > > wondering if someone has tried Fedora 29 on the pinebook, or if > > > it is even supported. > > Hi, > > I was curious which version did you get? I got mine a couple of weeks > ago, which is a 11' one with 1080p display. According to some > discussion with Icenowy (one of the linux-sunxi community > contributor) > the dtb of 1080 display version seems not fully upstream (at least at > that time). > > > I don't know what you mean by "anarsoul's arch mainline" as there's > > there appears to be bits there that aren't upstream in "mainline". > > > > On Fedora 29 the pinebook will boot and run but you need to be > > using > > the serial console which is accessible via the headphone jack, it > > doens't make it overly usable as a laptop though. > > > > This is improved with the current rawhide (which will become Fedora > > 30) in that the ATF/U-Boot firmware there will properly light up > > the > > display so you can get text based console output. > > > > > I've seen pine64-lts is[2], and I've been trying to create a > > > build[3] based on some scripts on the pine64 discord channel but > > > so far I have no idea on what I'm doing :) > > > > So if you used the 2019.01 U-Boot build and updated the F-29 image > > to > > at least the 4.20.x kernel you should have the basics of a working > > device. If you're not sure what your doing I would actually use a > > Fedora-30/Rawhide image. > > > > The 4.20 kernel with the above U-Boot should light up the display > > properly, it won't be accelerated though. The WiFi should work with > > the next F-29 kernel update, but the 5.0 kernel will bring a number > > of > > other improvements such as battery/charging support/monitoring and > > sound as well as better backlight control and a number of other > > features. > > > > While Fedora 30 won't be perfect it should ultimately be relatively > > usable with a desktop such as XFCE or Mate > > > > Hi Peter, > > Thanks for the information. I do confirm the U-Boot of 2019.01 boots > on mine. > And just a note, the arm-image-installer do not have pinebook(yet) > listed in the supported boards, so I need to write the U-Boot > manually. > > I don't have luck with my serial connection before. But I will try > again this week with the newest Rawhide and see. http://linux-sunxi.org/Pine_Pinebook#Adding_a_serial_port so long as you toggle the switch inside the pinebook the serial console will just work. Dennis > > Peter > > -- > Ziqian SUN (Zamir) > zsun@xxxxxxxxxxxxxxxxx > GPG : 1D86 6D4A 49CE 4BBD 72CF FCF5 D856 6E11 F2A0 525E > Want to know more about Fedora? > Visit https://fedoraproject.org/wiki/ > _______________________________________________ > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx > Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html > List Guidelines: > https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives: > https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx
