Ken, > Peter > Where might find aarch64 *.xz sda image?? for rawhide?? We produce Workstaion, Server and Minimal for aarch64, for all the Spins it's up to the Spins maintainers to request they get added for a particular architecture and for the Spins maintainers to assist in supporting them. I would suggest you reach out to the maintainer of which ever spin you prefer. > FC29_1.2 does NOT have orangepi_prime There's no need to yell... Fedora 29 GA, AKA the 1.2 you refer to above shipped with uboot-tools-2018.09-1.fc29 which has in the uboot-images-armv8-2018.09-1.fc29 sub package the following 64 bit Orange Pi models: orangepi_one_plus orangepi_pc2 orangepi_prime orangepi_win orangepi_zero_plus orangepi_zero_plus2 In fact initial upstream U-Boot support for this device landed in May 2017. > Type 'YES' to proceed, anything else to exit now = Proceed? yes = Writing: = Fedora-Workstation-29-1.2.aarch64.raw.xz = To: /dev/sdd .... 0+1038205 records in 0+1038205 records out 11811160064 bytes (12 GB, 11 GiB) copied, 1997.52 s, 5.9 MB/s = Writing image complete! = No U-Boot files found for orangepi_prime. = Installation Complete! Insert into the orangepi_prime and boot. It works just fine for me: # arm-image-installer --image=Fedora-Workstation-29-1.2.aarch64.raw.xz --target=orangepi_prime --media=/dev/sdb ===================================================== = Selected Image: = Fedora-Workstation-29-1.2.aarch64.raw.xz = Selected Media : /dev/sdb = U-Boot Target : orangepi_prime ===================================================== ***************************************************** ***************************************************** ******** WARNING! ALL DATA WILL BE DESTROYED ******** ***************************************************** ***************************************************** Type 'YES' to proceed, anything else to exit now = Proceed? yes = Writing: = Fedora-Workstation-29-1.2.aarch64.raw.xz = To: /dev/sdb .... 0+909233 records in 0+909233 records out 11811160064 bytes (12 GB, 11 GiB) copied, 865.543 s, 13.6 MB/s = Writing image complete! = Writing sunxi-spl.bin for orangepi_prime .... 4+0 records in 4+0 records out 32768 bytes (33 kB, 32 KiB) copied, 0.00203287 s, 16.1 MB/s = Writing u-boot FIT image for orangepi_prime .... 72+1 records in 72+1 records out 597064 bytes (597 kB, 583 KiB) copied, 0.0474322 s, 12.6 MB/s = Installation Complete! Insert into the orangepi_prime and boot. A question, do you have a local install of uboot bits ("rpm -qa | grep uboot") on the device which you're running arm-image-installer from? If so what version, what version of arm-image-installer? _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx