|
On 12/4/18 5:30 PM, Dennis Gilmore
wrote:
El mar, 04-12-2018 a las 16:14 -0500, Robert Moskowitz escribió:On 12/4/18 1:24 PM, Dennis Gilmore wrote:The odroid boards need binary files we can not distribute. While I have a couple they are not really supportable.No success today. Here is what I tried: used https://blog.christophersmart.com/2018/04/28/fedora-on-odroid-hc1-mini-nas-armv7/ All work was done on my F28 x64 notebook on to a 16GB uSD card. downloaded and installed F30 minimal: fedora-arm-image-installer --image=/home/rgm/arm/Fedora-Minimal-armhfp-Rawhide-20181203.n.0- sda.raw.xz --target=none --media=/dev/sdb Then installed the bootloader: mkdir hardkernel ; cd hardkernel wget https://raw.githubusercontent.com/hardkernel/u-boot/odroidxu4-v2017.05/sd_fuse/sd_fusing.sh \ https://raw.githubusercontent.com/hardkernel/u-boot/odroidxu4-v2017.05/sd_fuse/bl1.bin.hardkernel \ https://raw.githubusercontent.com/hardkernel/u-boot/odroidxu4-v2017.05/sd_fuse/bl2.bin.hardkernel.720k_uboot \ https://raw.githubusercontent.com/hardkernel/u-boot/odroidxu4-v2017.05/sd_fuse/tzsw.bin.hardkernel cp /run/media/rgm/__/usr/share/uboot/odroid-xu3/u-boot.bin . chmod a+x sd_fusing.sh ./sd_fusing.sh /dev/sdb Note that I took the uboot from the F30 install. Next I fixed extlinux. The above website had extlinux.conf directly in the mounted boot partition, I found it in the extlinux directory. sed -i "s|append|& cpuidle.off=1 \ console=tty1 console=ttySAC2,115200n8 \ rd.driver.pre=ledtrig-heartbeat,xhci-plat-hcd no_bL_switcher|" \ /run/media/rgm/__boot/extlinux/extlinux.conf This resulted in: cat /run/media/rgm/__boot/extlinux/extlinux.conf # extlinux.conf generated by appliance-creator ui menu.c32 menu autoboot Welcome to Fedora-Minimal-armhfp-Rawhide-20181203.n.0. Automatic boot in # second{,s}. Press a key for options. menu title Fedora-Minimal-armhfp-Rawhide-20181203.n.0 Boot Options. menu hidden timeout 20 totaltimeout 600 label Fedora-Minimal-armhfp-Rawhide-20181203.n.0 (4.20.0-0.rc4.git2.1.fc30.armv7hl) kernel /vmlinuz-4.20.0-0.rc4.git2.1.fc30.armv7hl append cpuidle.off=1 console=tty1 console=ttySAC2,115200n8 rd.driver.pre=ledtrig-heartbeat,xhci-plat-hcd no_bL_switcher ro root=UUID=0405755f-001a-4df5-8a6d-c9538ca89ee3 rhgb quiet LANG=en_US.UTF-8 fdtdir /dtb-4.20.0-0.rc4.git2.1.fc30.armv7hl/ initrd /initrd-4.20.0-0.rc4.git2.1.fc30.armv7hl.img I inserted the uSD card in the Odroid, connected the serial cable, running screen and here is the capture: U-Boot 2018.09 (Sep 11 2018 - 09:51:41 +0000) for ODROID-XU3/XU4/HC1 CPU: Exynos5422 @ 800 MHz Model: Odroid XU3 based on EXYNOS5422 Board: Odroid XU3 based on EXYNOS5422 Type: hc1 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2 Loading Environment from MMC... Card did not respond to voltage select! *** Warning - No block device, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 MMC Device 1 not found no mmc device at slot 1 Card did not respond to voltage select! switch to partitions #0, OK mmc2 is current device Scanning mmc 2:2... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 728 bytes read in 3 ms (236.3 KiB/s) Ignoring unknown command: ui Ignoring malformed menu command: autoboot Ignoring malformed menu command: hidden Ignoring unknown command: totaltimeout Fedora-Minimal-armhfp-Rawhide-20181203.n.0 Boot Options. 1: Fedora-Minimal-armhfp-Rawhide-20181203.n.0 (4.20.0-0.rc4.git2.1.fc30.arm v7hl) Enter choice: 1: Fedora-Minimal-armhfp-Rawhide-20181203.n.0 (4.20.0-0.rc4 .git2.1.fc30.armv7hl) Retrieving file: /initrd-4.20.0-0.rc4.git2.1.fc30.armv7hl.img ** File not found /initrd-4.20.0-0.rc4.git2.1.fc30.armv7hl.img **was there an initrd in the boot partition? the problem is that it was not found. the file should actually be named initramfs-<version>.img not initrd-<version>.img ls /run/media/rgm/__boot/ config-4.20.0-0.rc4.git2.1.fc30.armv7hl dtb dtb-4.20.0-0.rc4.git2.1.fc30.armv7hl efi extlinux grub lost+found System.map-4.20.0-0.rc4.git2.1.fc30.armv7hl vmlinuz-4.20.0-0.rc4.git2.1.fc30.armv7hl no initramfs.... And I built this via the standard installer, using target=none. Is this file suppose to be in the image I downloaded or is it made somehow during the install. Dennis |
_______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx
