Hi Fabian and Ken, On Tue, Jun 19, 2018 at 10:42 AM, Fabian Affolter <fab@xxxxxxxxxxxxxxxxx> wrote: > On 06/19/2018 08:39 AM, Ken Harris wrote: >> On Sun, Jun 17, 2018 at 5:07 AM, Peter Robinson <pbrobinson@xxxxxxxxx> > wrote: >>> On Sun, Jun 17, 2018 at 3:58 AM, Ken Harris <kjh@xxxxxxxxxxx> wrote: >>>> I bought a Udoo Neo and put Fedora on it. >>>> It works well, but when I plug in USB devices, they don't show up. > > Lucky you. Fedora doesn't work on my UDOO NEO FULL. Not booting and my > guess is that I'm running in the issue Peter outlined in this response [1]. Just a follow up on this. I pulled some patches in to 4.18/rawhide and the latest images with 4.18 rc4 are booting and seems to be stable for me. Fabian if you get a chance I'd like to see if you see similar. For reference I used Fedora-Minimal-armhfp-Rawhide-20180710.n.0-sda.raw.xz So now back to the original problem. So USB doesn't hotplug for me either but a device works if it's there from boot. I seem to remember a similar issue on another device, I'll see if I can work that out when I get a moment, I suspect there's a GPIO that needs to be wired up in the DT or similar. Also bluetooth doesn't work for me but I also know what the fix is for that so I'll put together a patch when I get a moment. Let me know if there's anything else, I've only just got it up so I've not had a chance to look too closely. I also intend to get Zephyr [1] running on the Cortex-M4 processor and probably look at Open-AMP [2] for it too just FYI. [1] https://github.com/zephyrproject-rtos/zephyr/pull/7123 [2] https://github.com/OpenAMP _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx/message/VGTKWNGU4C5ICZMAPASTSG42CPZ6RMEM/
