Re: Udoo Neo : USB known to work ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Peter, et al :

On Sun, Jun 17, 2018 at 5:07 AM, Peter Robinson <pbrobinson@xxxxxxxxx> wrote:
> On Sun, Jun 17, 2018 at 3:58 AM, Ken Harris <kjh@xxxxxxxxxxx> wrote:

>> I bought a Udoo Neo and put Fedora on it.

>> It works well, but when I plug in USB devices, they don't show up.

>> Is USB on Udoo Neo known to work ?

> TBH I'm not sure, I'll dig mine out and see if I can recreate it, I
> had issues with it previously for something completely different and
> haven't had time to get back to it to test it further.

> I have the Neo Full (both wifi and eth). Other i.MX6 variants work fine with USB.

>> I thought I'd ask before trying to isolate it (I'll download "udoobuntu").

FYI, I put Udoobuntu on it :

http://download.udoo.org/files/Neo_img/UDOObuntu_img/udoobuntu-udoo-neo-desktop_2.2.0.zip

... and the USB works fine.

This is Ubuntu 14.04.5 LTS , Linux 3.14.56

Attached is dmesg output and the device tree file.

>> Please share any tips on how to isolate the problem.

>> Thanks,
>> Ken
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.56-udooneo-02054-gc460cad (udooer@udoocompiler) (gcc version 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.3) ) #4 SMP PREEMPT Thu Jun 15 13:32:59 UTC 2017
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: UDOO Neo Full
[    0.000000] Reserved memory: reserved region for node 'm4@0x84000000': base 0x84000000, size 8 MiB
[    0.000000] Reserved memory: reserved region for node 'm4@0xBFF00000': base 0xbff00000, size 1 MiB
[    0.000000] cma: CMA: reserved 320 MiB at aa000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 259840
[    0.000000] free_area_init_node: node 0, pgdat 80abbc40, node_mem_map bf657000
[    0.000000]   DMA zone: 2048 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 259840 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @bf639000 s8256 r8192 d16320 u32768
[    0.000000] pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257792
[    0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw rootfstype=ext4 uart_from_osc clk_ignore_unused cpuidle.off=1 consoleblank=0
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 690500K/1039360K available (4911K kernel code, 284K rwdata, 5516K rodata, 244K init, 384K bss, 348860K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc0800000 - 0xff000000   (1000 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xc0000000   (1024 MB)
[    0.000000]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
[    0.000000]     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
[    0.000000]       .text : 0x80008000 - 0x80a36e3c   (10428 kB)
[    0.000000]       .init : 0x80a37000 - 0x80a74040   ( 245 kB)
[    0.000000]       .data : 0x80a76000 - 0x80abd0a0   ( 285 kB)
[    0.000000]        .bss : 0x80abd0ac - 0x80b1d43c   ( 385 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] L310 cache controller enabled
[    0.000000] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32030000, Cache size: 256 kB
[    0.000000] Switching to timer-based delay loop
[    0.000007] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns
[    0.000833] clocksource_of_init: no matching clocksources found
[    0.000994] Console: colour dummy device 80x30
[    0.001018] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
[    0.001030] pid_max: default: 32768 minimum: 301
[    0.001173] Security Framework initialized
[    0.001232] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001243] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.007256] device-tree: Duplicate name in /soc/aips-bus@02200000/spba-bus@02200000/lcdif@02220000, renamed to "display#1"
[    0.009455] Initializing cgroup subsys devices
[    0.009474] Initializing cgroup subsys freezer
[    0.009521] CPU: Testing write buffer coherency: ok
[    0.009806] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.009845] Setting up static identity map for 0x804abd10 - 0x804abd68
[    0.040362] Brought up 1 CPUs
[    0.040378] SMP: Total of 1 processors activated (6.00 BogoMIPS).
[    0.040388] CPU: All CPU(s) started in SVC mode.
[    0.040997] devtmpfs: initialized
[    0.044743] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.045067] pinctrl core: initialized pinctrl subsystem
[    0.045419] regulator-dummy: no parameters
[    0.061813] NET: Registered protocol family 16
[    0.069092] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.069767] Use WDOG1 as reset source
[    0.075208] GPIO mask to reserved irq for M4 Core = 0x00000350 
[    0.075960] GPIO mask to reserved irq for M4 Core = 0x003cf000 
[    0.076725] GPIO mask to reserved irq for M4 Core = 0x000c0000 
[    0.078741] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
[    0.079059] vdd1p1: 800 <--> 1375 mV at 1100 mV 
[    0.079437] vdd3p0: 2800 <--> 3150 mV at 3000 mV 
[    0.079791] vdd2p5: 2100 <--> 2875 mV at 2500 mV 
[    0.080163] cpu: 725 <--> 1450 mV 
[    0.080606] vddpcie-phy: 725 <--> 1450 mV 
[    0.080986] vddsoc: 725 <--> 1450 mV 
[    0.082949] syscon 20e4000.iomuxc-gpr: regmap [mem 0x020e4000-0x020e7fff] registered
[    0.085659] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
[    0.086092] syscon 21ac000.romcp: regmap [mem 0x021ac000-0x021affff] registered
[    0.091162] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.091175] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.092311] imx6sx-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[    0.093195] 20dc000.gpc supply pu not found, using dummy regulator
[    0.093969] MU is ready for cross core communication!
[    0.100266] bio: create slab <bio-0> at 0
[    0.102730] mxs-dma 1804000.dma-apbh: initialized
[    0.103431] vref-3v3: 3300 mV 
[    0.103674] PSU-5V0: 5000 mV 
[    0.103975] usb_otg1_vbus: 5000 mV 
[    0.104322] usb_otg2_vbus: 5000 mV 
[    0.104563] wlan-en-regulator: 1800 mV 
[    0.105410] SCSI subsystem initialized
[    0.105702] usbphy_nop1.12 supply vcc not found, using dummy regulator
[    0.107029] i2c i2c-0: IMX I2C adapter registered
[    0.108784] i2c i2c-1: IMX I2C adapter registered
[    0.109540] i2c i2c-2: IMX I2C adapter registered
[    0.110834] i2c i2c-3: IMX I2C adapter registered
[    0.110957] Linux video capture interface: v2.00
[    0.111027] pps_core: LinuxPPS API ver. 1 registered
[    0.111036] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[    0.111060] PTP clock support registered
[    0.111622] Advanced Linux Sound Architecture Driver Initialized.
[    0.112679] Loading modules backported from Linux version v4.1.7-0-g0c5c1f1
[    0.112691] Backport integrated by backports.git v4.1.1-1-0-g8286954
[    0.112871] Switched to clocksource mxc_timer1
[    0.123429] NET: Registered protocol family 2
[    0.124317] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.124401] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.124530] TCP: Hash tables configured (established 8192 bind 8192)
[    0.124606] TCP: reno registered
[    0.124621] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.124659] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.124927] NET: Registered protocol family 1
[    0.125249] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.126782] Bus freq driver module loaded
[    0.127558] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.134710] VFS: Disk quotas dquot_6.5.2
[    0.135013] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.136907] msgmni has been set to 1988
[    0.140812] io scheduler noop registered
[    0.140826] io scheduler deadline registered
[    0.140872] io scheduler cfq registered (default)
[    0.141361] imx-weim 21b8000.weim: Driver registered.
[    0.143184] MIPI DSI driver module loaded
[    0.273712] tda19988 2-0034: Sucessfully initialised chip revision 301
[    0.284716] mxsfb 2220000.lcdif: failed to find mxc display driver 
[    0.285250] DISPLAY: Power-on latency exceeded, new value 495334 ns
[    0.287176] DISPLAY: Power-off latency exceeded, new value 497000 ns
[    0.304658] Console: switching to colour frame buffer device 160x45
[    0.348696] tda19988 2-0034: Matching CEA mode is 4 for fb mode 1280x720-60
[    0.398986] DISPLAY: Power-off latency exceeded, new value 498666 ns
[    0.401613] mxsfb 2220000.lcdif: initialized
[    0.404647] imx-sdma 20ec000.sdma: no iram assigned, using external mem
[    0.404968] imx-sdma 20ec000.sdma: no event needs to be remapped
[    0.405208] imx-sdma 20ec000.sdma: loaded firmware 3.1
[    0.408227] imx-sdma 20ec000.sdma: initialized
[    0.409911] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1
[    0.410480] pfuze100-regulator 0-0008: FAB: 0, FIN: 0
[    0.410493] pfuze100-regulator 0-0008: pfuze3000 found.
[    0.411952] SW1A: 700 <--> 1475 mV at 1175 mV 
[    0.413299] SW1B: 700 <--> 1475 mV at 1175 mV 
[    0.414098] SW2: 1500 <--> 1850 mV at 1800 mV 
[    0.414860] SW3: 900 <--> 1650 mV at 1350 mV 
[    0.415608] SWBST: 5000 <--> 5150 mV at 5000 mV 
[    0.416377] VSNVS: 1000 <--> 3000 mV at 3000 mV 
[    0.416564] VREFDDR: 750 mV 
[    0.417314] VLDO1: 1800 <--> 3300 mV at 1800 mV 
[    0.418080] VLDO2: 800 <--> 1550 mV at 1500 mV 
[    0.418825] VCCSD: 2850 <--> 3300 mV at 3150 mV 
[    0.419582] V33: 2850 <--> 3300 mV at 3150 mV 
[    0.420333] VLDO3: 1800 <--> 3300 mV at 1800 mV 
[    0.421504] VLDO4: 1800 <--> 3300 mV at 1800 mV 
[    0.421858] Serial: IMX driver
[    0.422194] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 1500000) is a IMX
[    1.230241] console [ttymxc0] enabled
[    1.234770] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 1500000) is a IMX
[    1.243854] serial: Freescale lpuart driver
[    1.249436] imx sema4 driver is registered.
[    1.254102] Installing ttyMCC driver!
[    1.257832] 
[    1.257832] A9 ttyMCC prepares to run, MCC version is 002.000
[    1.265169] IMX MCC TTY driver module loaded
[    1.269508] [drm] Initialized drm 1.1.0 20060810
[    1.274605] [drm] Initialized vivante 1.0.0 20120216 on minor 0
[    1.285247] loop: module loaded
[    1.291308] 2188000.ethernet supply phy not found, using dummy regulator
[    1.333319] pps pps0: new PPS source ptp0
[    1.342439] libphy: fec_enet_mii_bus: probed
[    1.347445] fec 2188000.ethernet eth0: registered PHC device 0
[    1.353853] mousedev: PS/2 mouse device common for all mice
[    1.360321] input: 20cc000.snvs-pwrkey as /devices/soc0/soc.0/2000000.aips-bus/20cc000.snvs-pwrkey/input/input0
[    1.370788] snvs_pwrkey 20cc000.snvs-pwrkey: i.MX snvs powerkey probed
[    1.378209] i2c /dev entries driver
[    1.382507] IR NEC protocol handler initialized
[    1.387131] IR RC5(x) protocol handler initialized
[    1.391935] IR RC6 protocol handler initialized
[    1.396501] IR JVC protocol handler initialized
[    1.401041] IR Sony protocol handler initialized
[    1.405679] IR RC5 (streamzap) protocol handler initialized
[    1.411257] IR SANYO protocol handler initialized
[    1.415982] IR MCE Keyboard/mouse protocol handler initialized
[    1.423836] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
[    1.432338] sdhci: Secure Digital Host Controller Interface driver
[    1.438576] sdhci: Copyright(c) Pierre Ossman
[    1.442962] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.449658] mmc0: no vqmmc regulator found
[    1.453824] mmc0: no vmmc regulator found
[    1.502903] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
[    1.512693] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
[    1.526374] mmc2: no vqmmc regulator found
[    1.571417] mmc0: host does not support reading read-only switch. assuming write-enable.
[    1.585886] mmc0: new high speed SDHC card at address 0007
[    1.591867] mmcblk0: mmc0:0007 SD4GB 3.70 GiB 
[    1.597972]  mmcblk0: p1 p2
[    1.652891] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
[    1.662671] galcore: clk_get 2d core clock failed, disable 2d/vg!
[    1.662701] Galcore version 5.0.11.25762
[    1.676856] sdhci-esdhc-imx 2198000.usdhc: card claims to support voltages below defined range
[    1.715246] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[    1.734217] mmc2: new high speed SDIO card at address 0001
[    1.910741] fsl-asrc 2034000.asrc: driver registered
[    1.921816] imx-tda19988 sound_hdmi.25: tda19988-codec <-> 202c000.ssi mapping ok
[    1.930588] nf_conntrack version 0.5.0 (15909 buckets, 63636 max)
[    1.937390] TCP: cubic registered
[    1.940728] NET: Registered protocol family 17
[    1.945271] Key type dns_resolver registered
[    1.950301] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)
[    1.972917] failed to register cpuidle driver
[    1.977294] ThumbEE CPU extension supported.
[    1.982136] VLDO2: disabling
[    1.985541] SWBST: disabling
[    1.988435] usb_otg2_vbus: disabling
[    1.992017] usb_otg1_vbus: disabling
[    1.995763] PSU-5V0: disabling
[    1.998854] vref-3v3: disabling
[    2.002028] regulator-dummy: disabling
[    2.006752] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    2.013953] imx_thermal tempmon.11: Extended Commercial CPU temperature grade
[    2.021104] imx_thermal tempmon.11: max:105C crit:100C passive:95C
[    2.035680] clk: Not disabling unused clocks
[    2.039977] ALSA device list:
[    2.043070]   #0: imx-audio-tda19988
[    5.840054] random: nonblocking pool is initialized
[    9.041614] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
[    9.047341] EXT4-fs (mmcblk0p2): recovery complete
[    9.567714] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    9.576028] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    9.582286] devtmpfs: mounted
[    9.585819] Freeing unused kernel memory: 244K (80a37000 - 80a74000)
[   11.064987] init: mounted-proc main process (99) terminated with status 1
[   12.141922] systemd-udevd[211]: starting version 204
[   12.357241] fuse init (API version 7.22)
[   12.531226] (stk) :sysfs entries created
[   12.531270] (stk) : debugfs entries created 
[   12.651064] Bluetooth: Core ver 2.20
[   12.651685] NET: Registered protocol family 31
[   12.651699] Bluetooth: HCI device and connection manager initialized
[   12.651723] Bluetooth: HCI socket layer initialized
[   12.651734] Bluetooth: L2CAP socket layer initialized
[   12.651777] Bluetooth: SCO socket layer initialized
[   12.658364] hdev a860f000
[   12.675669] HCI device registered (hdev a860f000)
[   12.676886] hci0 a860f000
[   12.676901] (stc):  chnl_id list empty :4 
[   12.676908] (stk) : st_kim_start(stk) :ldisc_install = 1
[   13.037726] usbcore: registered new interface driver usbfs
[   13.037906] usbcore: registered new interface driver hub
[   13.046605] usbcore: registered new device driver usb
[   13.060755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.096918] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
[   13.175662] ci_hdrc ci_hdrc.1: EHCI Host Controller
[   13.175706] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
[   13.192952] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[   13.194140] hub 1-0:1.0: USB hub found
[   13.194199] hub 1-0:1.0: 1 port detected
[   13.381174] tsl2563 1-0029: detect error 5
[   13.422390] tsl2563: probe of 1-0029 failed with error -5
[   13.422905] lm75: probe of 1-0048 failed with error -5
[   13.423341] si70xx: probe of 1-0040 failed with error -5
[   13.423682] mpl3115: probe of 1-0060 failed with error -5
[   13.542032] input: FreescaleAccelerometer as /devices/virtual/input/input1
[   13.549992] input: FreescaleMagnetometer as /devices/virtual/input/input2
[   13.577029] fxos8700_probe succ
[   13.578378] input: FreescaleGyroscope as /devices/virtual/input/input3
[   13.579252] fxas2100x device driver probe successfully
[   13.647865] CSI: Registered sensor subdevice: fsl_vadc
[   13.672944] wait vadc auto detect video mode....
[   13.782922] (stk) :ldisc installation timeout
[   13.787123] (stk) :ldisc_install = 0<6>[   14.092946] video mode NTSC
[   14.092951] vadc driver loaded
[   14.452085] cfg80211: Calling CRDA to update world regulatory domain
[   14.772685] cfg80211: World regulatory domain updated:
[   14.772700] cfg80211:  DFS Master region: unset
[   14.772706] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   14.772718] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   14.772726] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   14.772734] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   14.772744] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   14.772753] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   14.772761] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   14.772768] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   14.772776] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   14.782954] (stk) : timed out waiting for ldisc to be un-installed
[   14.898698] (stk) :ldisc_install = 1<6>[   14.911533] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[   14.935806] cfg80211: Updating information on frequency 2412 MHz with regulatory rule:
[   14.935819] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.935827] cfg80211: Updating information on frequency 2417 MHz with regulatory rule:
[   14.935834] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.935840] cfg80211: Updating information on frequency 2422 MHz with regulatory rule:
[   14.935847] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.935854] cfg80211: Updating information on frequency 2427 MHz with regulatory rule:
[   14.935860] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.935866] cfg80211: Updating information on frequency 2432 MHz with regulatory rule:
[   14.935872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.935878] cfg80211: Updating information on frequency 2437 MHz with regulatory rule:
[   14.935884] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.935890] cfg80211: Updating information on frequency 2442 MHz with regulatory rule:
[   14.935896] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.935902] cfg80211: Updating information on frequency 2447 MHz with regulatory rule:
[   14.935909] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.935914] cfg80211: Updating information on frequency 2452 MHz with regulatory rule:
[   14.935921] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.935927] cfg80211: Updating information on frequency 2457 MHz with regulatory rule:
[   14.935934] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.935939] cfg80211: Updating information on frequency 2462 MHz with regulatory rule:
[   14.935945] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.935951] cfg80211: Updating information on frequency 2467 MHz with regulatory rule:
[   14.935958] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.935963] cfg80211: Updating information on frequency 2472 MHz with regulatory rule:
[   14.935969] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   14.935975] cfg80211: Updating information on frequency 2484 MHz with regulatory rule:
[   14.935981] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A mBi, 2000 mBm)
[   14.935989] cfg80211: Disabling freq 5040 MHz
[   14.935994] cfg80211: Disabling freq 5060 MHz
[   14.935999] cfg80211: Disabling freq 5080 MHz
[   14.936004] cfg80211: Disabling freq 5170 MHz
[   14.936011] cfg80211: Updating information on frequency 5180 MHz with regulatory rule:
[   14.936018] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm)
[   14.936025] cfg80211: Updating information on frequency 5190 MHz with regulatory rule:
[   14.936032] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm)
[   14.936039] cfg80211: Updating information on frequency 5200 MHz with regulatory rule:
[   14.936047] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm)
[   14.936054] cfg80211: Updating information on frequency 5210 MHz with regulatory rule:
[   14.936060] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm)
[   14.936067] cfg80211: Updating information on frequency 5220 MHz with regulatory rule:
[   14.936073] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm)
[   14.936081] cfg80211: Updating information on frequency 5230 MHz with regulatory rule:
[   14.936087] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm)
[   14.936093] cfg80211: Updating information on frequency 5240 MHz with regulatory rule:
[   14.936101] cfg80211: 5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm)
[   14.936108] cfg80211: Updating information on frequency 5260 MHz with regulatory rule:
[   14.936114] cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm)
[   14.936121] cfg80211: Updating information on frequency 5280 MHz with regulatory rule:
[   14.936128] cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm)
[   14.936135] cfg80211: Updating information on frequency 5300 MHz with regulatory rule:
[   14.936141] cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm)
[   14.936148] cfg80211: Updating information on frequency 5320 MHz with regulatory rule:
[   14.936154] cfg80211: 5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A mBi, 2000 mBm)
[   14.936160] cfg80211: Updating information on frequency 5500 MHz with regulatory rule:
[   14.936167] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm)
[   14.936173] cfg80211: Updating information on frequency 5520 MHz with regulatory rule:
[   14.936179] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm)
[   14.936186] cfg80211: Updating information on frequency 5540 MHz with regulatory rule:
[   14.936192] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm)
[   14.936200] cfg80211: Updating information on frequency 5560 MHz with regulatory rule:
[   14.936206] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm)
[   14.936212] cfg80211: Updating information on frequency 5580 MHz with regulatory rule:
[   14.936218] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm)
[   14.936224] cfg80211: Updating information on frequency 5600 MHz with regulatory rule:
[   14.936230] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm)
[   14.936236] cfg80211: Updating information on frequency 5620 MHz with regulatory rule:
[   14.936242] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm)
[   14.936247] cfg80211: Updating information on frequency 5640 MHz with regulatory rule:
[   14.936254] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm)
[   14.936259] cfg80211: Updating information on frequency 5660 MHz with regulatory rule:
[   14.936266] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm)
[   14.936271] cfg80211: Updating information on frequency 5680 MHz with regulatory rule:
[   14.936278] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm)
[   14.936284] cfg80211: Updating information on frequency 5700 MHz with regulatory rule:
[   14.936290] cfg80211: 5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A mBi, 2000 mBm)
[   14.936296] cfg80211: Updating information on frequency 5745 MHz with regulatory rule:
[   14.936302] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 2000 mBm)
[   14.936308] cfg80211: Updating information on frequency 5765 MHz with regulatory rule:
[   14.936314] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 2000 mBm)
[   14.936320] cfg80211: Updating information on frequency 5785 MHz with regulatory rule:
[   14.936326] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 2000 mBm)
[   14.936332] cfg80211: Updating information on frequency 5805 MHz with regulatory rule:
[   14.936338] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 2000 mBm)
[   14.936345] cfg80211: Updating information on frequency 5825 MHz with regulatory rule:
[   14.936351] cfg80211: 5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A mBi, 2000 mBm)
[   14.955902] wlcore: loaded
[   14.955940] wlcore: driver version: v3.14.56-2054-gc460cad
[   15.095796] using random self ethernet address
[   15.095814] using random host ethernet address
[   15.095823] using host ethernet address: 4e:71:9d:8c:3f:d7
[   15.095829] using self ethernet address: 4e:71:9e:8c:3f:d7<6>[   15.222251] Number of LUNs=8
[   15.222268] Mass Storage Function, version: 2009/09/11
[   15.222278] LUN: removable file: (no medium)
[   15.222293] Number of LUNs=1
[   15.222390] LUN: removable file: /dev/mmcblk0p1
[   15.222401] Number of LUNs=1
[   15.223013] usb0: HOST MAC 4e:71:9d:8c:3f:d7
[   15.223056] usb0: MAC 4e:71:9e:8c:3f:d7
[   15.232716] g_multi gadget: Multifunction Composite Gadget
[   15.232728] g_multi gadget: g_multi ready
[   15.892941] (stk) :ldisc installation timeout
[   15.897303] (stk) :ldisc_install = 0<6>[   16.510116] NET: Registered protocol family 10
[   16.708971] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.708982] Bluetooth: BNEP filters: protocol multicast
[   16.709011] Bluetooth: BNEP socket layer initialized
[   16.892933] (stk) : timed out waiting for ldisc to be un-installed
[   17.006026] (stk) :ldisc_install = 1(stc): st_tty_open 
[   17.057464] (stk) :line discipline installed(stk) :TIInit_11.8.32.bts
[   17.063853] (stk) :change remote baud rate command in firmware(stk) :invalid action after change remote baud command
[   17.180886] Bluetooth: RFCOMM TTY layer initialized
[   17.181113] Bluetooth: RFCOMM socket layer initialized
[   17.181149] Bluetooth: RFCOMM ver 1.11
[   18.059546] gyro enable setting active 
[   18.217096] (stc): add_channel_to_table: id 4
[   18.217113] (stc): add_channel_to_table: id 2
[   18.217120] (stc): add_channel_to_table: id 3
[   18.220556] hci0: type 1 len 4
[   18.221128] hci0: type 1 len 4
[   18.221737] hci0: type 1 len 4
[   18.222396] hci0: type 1 len 4
[   18.223714] hci0: type 1 len 4
[   18.224264] hci0: type 1 len 4
[   18.224739] hci0: type 1 len 4
[   18.227807] hci0: type 1 len 4
[   18.228432] hci0: type 1 len 4
[   18.228871] hci0: type 1 len 4
[   18.229342] hci0: type 1 len 5
[   18.229935] hci0: type 1 len 6
[   18.230381] hci0: type 1 len 4
[   18.230869] hci0: type 1 len 4
[   18.231411] hci0: type 1 len 4
[   18.231956] hci0: type 1 len 4
[   18.232431] hci0: type 1 len 4
[   18.232943] hci0: type 1 len 4
[   18.234088] hci0: type 1 len 245
[   18.237282] hci0: type 1 len 5
[   18.238135] hci0: type 1 len 4
[   18.238585] hci0: type 1 len 5
[   18.239100] hci0: type 1 len 12
[   18.239600] hci0: type 1 len 11
[   18.240150] hci0: type 1 len 6
[   18.240574] hci0: type 1 len 4
[   18.241033] hci0: type 1 len 4
[   18.241462] hci0: type 1 len 12
[   18.242028] hci0: type 1 len 4
[   18.242518] hci0: type 1 len 11
[   18.243491] hci0: type 1 len 4
[   18.309251] hci0: type 1 len 5
[   18.310125] hci0: type 1 len 6
[   18.310714] hci0: type 1 len 36
[   18.311515] hci0: type 1 len 36
[   18.313120] hci0: type 1 len 5
[   18.313676] hci0: type 1 len 7
[   18.314143] hci0: type 1 len 252
[   18.317853] hci0: type 1 len 245
[   18.484756] init: avahi-cups-reload main process (639) terminated with status 1
[   19.529216] init: failsafe main process (669) killed by TERM signal
[   20.130179] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[   22.703134] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
[   22.703582] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.433658] wlcore: PHY firmware version: Rev 8.2.0.0.233
[   23.486870] wlcore: firmware booted (Rev 8.9.0.1.55)
[   23.508725] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.567824] wlan0: authenticate with a0:f3:c1:5e:ad:cb
[   25.567843] wlan0: Allocated STA a0:f3:c1:5e:ad:cb
[   25.609820] wlan0: Inserted STA a0:f3:c1:5e:ad:cb
[   25.609841] wlan0: send auth to a0:f3:c1:5e:ad:cb (try 1/3)
[   25.624297] wlan0: authenticated
[   25.624317] wlan0: moving STA a0:f3:c1:5e:ad:cb to state 2
[   25.633096] wlan0: associate with a0:f3:c1:5e:ad:cb (try 1/3)
[   25.642442] wlan0: RX AssocResp from a0:f3:c1:5e:ad:cb (capab=0x431 status=0 aid=4)
[   25.642466] wlan0: moving STA a0:f3:c1:5e:ad:cb to state 3
[   25.658438] wlan0: associated
[   25.658476] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   25.673096] wlan0: dropped frame to a0:f3:c1:5e:ad:cb (unauthorized port)
[   25.712959] wlan0: dropped frame to a0:f3:c1:5e:ad:cb (unauthorized port)
[   25.825378] wlan0: moving STA a0:f3:c1:5e:ad:cb to state 4
[   25.834943] wlcore: Association completed.
[   74.762924] cfg80211: Verifying active interfaces after reg change
[ 3509.140323] systemd-timedated[2077]: /etc/localtime should be a symbolic link to a timezone data file in /usr/share/zoneinfo/.
[ 4081.882324] usb 1-1: new full-speed USB device number 2 using ci_hdrc
[ 4082.181067] usbcore: registered new interface driver usbserial
[ 4082.181263] usbcore: registered new interface driver usbserial_generic
[ 4082.181687] usbserial: USB Serial support registered for generic
[ 4082.218678] usbcore: registered new interface driver ftdi_sio
[ 4082.224482] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 4082.224622] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 4082.226184] usb 1-1: Detected FT232RL
[ 4082.226197] usb 1-1: Number of endpoints 2
[ 4082.226206] usb 1-1: Endpoint 1 MaxPacketSize 64
[ 4082.226214] usb 1-1: Endpoint 2 MaxPacketSize 64
[ 4082.226223] usb 1-1: Setting MaxPacketSize 64
[ 4082.228950] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 4084.899093] usb 1-1: USB disconnect, device number 2
[ 4084.900760] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 4084.901034] ftdi_sio 1-1:1.0: device disconnected

Attachment: imx6sx-udoo-neo-full-hdmi-m4-3.14.56-udooneo-02054-gc460cad.dts
Description: audio/vnd.dts

_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx/message/CNHUS4MLQDI7LL763BELDSKK6RBVKS4S/

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux ARM (Vger)]     [Linux ARM]     [ARM Kernel]     [Fedora User Discussion]     [Older Fedora Users Discussion]     [Fedora Advisory Board]     [Fedora Security]     [Fedora Maintainers]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Mentors]     [Fedora Package Announce]     [Fedora Package Review]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Coolkey]     [Yum Users]     [Tux]     [Yosemite News]     [Linux Apps]     [KDE Users]     [Fedora Tools]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]

Powered by Linux