/dev/mmcblk0:
Timing cached reads: 15750 MB in 2.00 seconds = 7893.74 MB/sec
Timing buffered disk reads: 88 MB in 3.05 seconds = 28.82 MB/sec <--- This was 365 kB/sec in the RPi3.
/dev/mmcblk0:
Timing cached reads: 15908 MB in 2.00 seconds = 7973.32 MB/sec
Timing buffered disk reads: 54 MB in 3.05 seconds = 17.71 MB/sec
The second SD is actually slower to read than the first one, in the laptop. 28.82 versus 17.71 MB/sec
/dev/mmcblk0:
Timing cached reads: 816 MB in 2.00 seconds 408.21 MB/sec
Timing buffered disk reads: 66 MB in 3.03 seconds = 21.81 MB/sec <--- Faster than it was in the laptop !
That would be a good place to start. FWIW, all my micro SD cards are Sandisk ultra’s . Unfortunately I don’t see that /sys/block is well populated (no model).
-Bryan
From: linux guy [mailto:linuxguy123@xxxxxxxxx]
Sent: Wednesday, January 24, 2018 2:51 PM
To: Duff, Bryan
Cc: Richard Ryniker; arm@xxxxxxxxxxxxxxxxxxxxxxx; marcin steć
Subject: Re: [fedora-arm] Re: Exactly how slow is Fedora 27 on an RP3 ? dnf update takes hours ?
Found the issue:
sudo hdparm -Tt /dev/mmcblk0
/dev/mmcblk0:
Timing cached reads: 240 MB in 2.00 seconds = 119.84 MB/sec
Timing buffered disk reads: 2 MB in 5.60 seconds = 365.82 kB/sec <------ Wow !
Bad memory card ????
On Wed, Jan 24, 2018 at 1:39 PM, Duff, Bryan <bryan.duff1@xxxxxxxxxx> wrote:
Eh, I’ll give it a go… on F26 armhf7l. Keep in mind my repos may be different, so it might very the timing by maybe 30s?
time sudo dnf install rygel –y
Unfortunately it’s only 21 packages for me. And now that I look at it, would probably be better to “dnf download” first and time that separately.
//start snip
…
Complete!
real 3m34.645s
user 1m54.094s
sys 1m19.396s
# and
sudo hdparm -Tt /dev/mmcblk0
/dev/mmcblk0:
Timing cached reads: 834 MB in 2.00 seconds = 417.21 MB/sec
Timing buffered disk reads: 68 MB in 3.06 seconds = 22.24 MB/sec
//end snip
Thanks.
-Bryan
From: linux guy [mailto:linuxguy123@xxxxxxxxx]
Sent: Wednesday, January 24, 2018 2:31 PM
To: Richard Ryniker
Cc: arm@xxxxxxxxxxxxxxxxxxxxxxx; marcin steć
Subject: [fedora-arm] Re: Exactly how slow is Fedora 27 on an RP3 ? dnf update takes hours ?
I just ran #time dnf install rygel on my fresh install. It required 56 packages.
real 64m43.986s
user 1m59.778s
sys 0m25.893s
This is on a console only machine, no GUI.
Could someone run the same process on their RPi3 and see what they get ?
This communication may contain information that is proprietary, confidential, or exempt from disclosure. If you are not the intended recipient, please note that any other dissemination, distribution, use or copying of this communication is strictly prohibited. Anyone who receives this message in error should notify the sender immediately by telephone or by return e-mail and delete it from his or her computer.
_______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
