Re: Summary of Fedora on Odroid XU4

[Stewart Samuels <searider74@xxxxxxxxx>]

So, to follow up with my last transmission, I did indeed down load the latest updates to both F26 & F27.  The kernel I just tested on F27 is 4.13.12-200.  It appears Andreas is correct in that USB 3 still does not respond from what I can see.

Regards,
   Stewart

On 11/15/2017 08:53 AM, Stewart Samuels wrote:

I was under the impression that the fix was going to be released into kernel 4.15 based on this response from you Peter.  And based on your schedule, I was also under the impression that any of these fixes likely would not go into earlier releases, so I haven't tested them.  As this was the last set of communications we have had regarding these issues, I was not aware that you had actually pushed the upstream patch.  Now that I know you have, I will retest them by downloading the latest updates to F27.

Regards,

     Stewart

On Tue, Sep 19, 2017 at 10:11 AM, Peter Robinson <pbrobinson@xxxxxxxxx> wrote:

On Thu, Aug 31, 2017 at 5:27 AM, Stewart Samuels <searider74@xxxxxxxxx> wrote:

Andreas & Dennis,

I have filed an upstream bug report regarding the USB3 and Ethernet
situation described below.  You can get to the bug report using the
following link:

https://bugzilla.redhat.com/show_bug.cgi?id=1487006

To note a bug in RHBZ is a Fedora bug not an upstream bug.

That being said I was browsing through the actual upstream arm-kernel
mailing list and it looks like others are seeing this problem and have
actually sent patches [1]. Once there's been some review and when I
get time I'll try to pull it int a Fedora kernel.

[1] http://www.spinics.net/lists/arm-kernel/msg606525.html

So today must be your lucky day, while waiting for images to download
I was browsing the ARM kernel list and noticed the exynos pull request
for 4.15 [1] and low and behold there's a fix headed upstream for the
usb3 issues and it applied cleanly to 4.13/4.14 so that should be
fixed in 4.13.7 which might make F-27 GA because I'm such a nice
individual. Only took them 7 kernel releases to fix it!

PS there's a bunch of other interesting stuff for those devices but
that'll have to wait for 4.15 because I'm not _THAT_ nice, oh and the
proper HC1 support will land with that too.

[1] http://www.spinics.net/lists/arm-kernel/msg611632.html

On 11/15/2017 02:18 AM, Peter Robinson wrote:

On Wed, Nov 15, 2017 at 9:54 AM, Andreas Reschke <arm_ml@xxxxxxxxxxx> wrote:

Any Updates ?

with actuell Fedora 27 no USB3 is working.

Well I pushed the proposed upstream patch quite some time ago, I
replied on this thread actually, and never heard anything so I assumed
that it worked because I never heard anything to the contrary. So if
that hasn't fixed it I have no idea where to go from here so someone
is going to have to engage with upstream to deal with this issue.

Peter

[root@odroidh1 ~]# uname -a
Linux odroidh1 4.13.12-300.fc27.armv7hl #1 SMP Wed Nov 8 18:03:47 UTC 2017
armv7l armv7l armv7l GNU/Linux
[root@odroidh1 ~]# lsusb
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 9710:7830 MosChip Semiconductor MCS7830 10/100 Mbps
Ethernet adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root@odroidh1 ~]# lsblk
NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
mmcblk1     179:0    0 14,9G  0 disk
├─mmcblk1p1 179:1    0   29M  0 part
├─mmcblk1p2 179:2    0  488M  0 part /boot
├─mmcblk1p3 179:3    0  488M  0 part [SWAP]
└─mmcblk1p4 179:4    0   14G  0 part /
[root@odroidh1 ~]#


Am 15.10.2017 um 18:50 schrieb Stewart Samuels:


On 10/15/2017 01:54 AM, Peter Robinson wrote:

On Tue, Sep 19, 2017 at 10:11 AM, Peter Robinson <pbrobinson@xxxxxxxxx>
wrote:

On Thu, Aug 31, 2017 at 5:27 AM, Stewart Samuels <searider74@xxxxxxxxx>
wrote:

Andreas & Dennis,

I have filed an upstream bug report regarding the USB3 and Ethernet
situation described below.  You can get to the bug report using the
following link:

https://bugzilla.redhat.com/show_bug.cgi?id=1487006

To note a bug in RHBZ is a Fedora bug not an upstream bug.

That being said I was browsing through the actual upstream arm-kernel
mailing list and it looks like others are seeing this problem and have
actually sent patches [1]. Once there's been some review and when I
get time I'll try to pull it int a Fedora kernel.

[1] http://www.spinics.net/lists/arm-kernel/msg606525.html

So today must be your lucky day, while waiting for images to download
I was browsing the ARM kernel list and noticed the exynos pull request
for 4.15 [1] and low and behold there's a fix headed upstream for the
usb3 issues and it applied cleanly to 4.13/4.14 so that should be
fixed in 4.13.7 which might make F-27 GA because I'm such a nice
individual. Only took them 7 kernel releases to fix it!

PS there's a bunch of other interesting stuff for those devices but
that'll have to wait for 4.15 because I'm not _THAT_ nice, oh and the
proper HC1 support will land with that too.

[1] http://www.spinics.net/lists/arm-kernel/msg611632.html

Yes, I was reading through the developer threads regarding this topic so I
knew they were close to releasing patches.  Not to continue this
conversation (because we already have your response), but that is part of
the reason I started this thread to begin with...to get an idea of the
timing and if it would be possible to get them in the F27 release.

Thanks.



_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx

_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx

_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx