On Sun, Sep 17, 2017 at 3:49 AM, Robert Moskowitz <rgm@xxxxxxxxxxxxxxx> wrote: > > > On 09/16/2017 07:57 AM, Peter Robinson wrote: >> >> On Fri, Sep 15, 2017 at 7:19 PM, Robert Moskowitz <rgm@xxxxxxxxxxxxxxx> >> wrote: >>> >>> I think this one is even worst than 0913. At least with what little I >>> tested. >>> >>> Still no ethernet, but the link is up. Further, I forgot to mention last >>> time, the config network option on the console is only offering the >>> hostname >>> to change. No ethernet, not surprisingly. But I set the hostname and it >>> does not 'take'. On continue it does not display an X in front of the >>> networking option and once I do log in as root, the hostname is still >>> localhost. I can change the hostname with the normal commands. >> >> What version of u-boot? There was an issue that affected some >> AllWinner A20 devices, make sure you're running 2017.09 rc4 > > > Dah, I had to do was check the saved console session: > > U-Boot SPL 2017.09-rc2 (Aug 25 2017 - 17:20:07) > DRAM: 1024 MiB > CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 > Trying to boot from MMC1 > > > U-Boot 2017.09-rc2 (Aug 25 2017 - 17:20:07 +0000) Allwinner Technology > > CPU: Allwinner A20 (SUN7I) > [rgm@lx120e arm]$ head screenlog.6bad -n20 > � > U-Boot SPL 2017.09-rc2 (Aug 25 2017 - 17:20:07) > DRAM: 1024 MiB > CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 > Trying to boot from MMC1 > > > U-Boot 2017.09-rc2 (Aug 25 2017 - 17:20:07 +0000) Allwinner Technology > > CPU: Allwinner A20 (SUN7I) > Model: Cubietech Cubieboard2 > I2C: ready > DRAM: 1 GiB > MMC: SUNXI SD/MMC: 0 > > So Koji is building the image with RC2. Please point me to RC4 and I will > test with that. Or please roll RC4 into the build process. https://koji.fedoraproject.org/koji/buildinfo?buildID=966566 It will be added to the build once we're out of freeze post beta, although that will be a 2017.09 GA build. >>> I plugged in the TP-link USB wifi dongle, and the console went crazy >>> scrolling messages. I had to unplug the dongle. The last few messages >>> are: >>> >>> [ 6040.341864] usb 4-1: ath9k_htc: USB layer deinitialized >> >> You need to include the full trace (from the point it says begin trace >> or similar), but that's not really a ARM/cubieboard specific crash >> > Since I am looking at the capture file... > > um, the whole capture is 440KB. How do you want it... I don't actually want any of it because I don't have much interest in terrible ath9K wireless dongles but the crash between the star/end indicators certainly won't be 440K, there's never any reason for a full dmesg. _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
