On Wed, Mar 22, 2017 at 5:13 PM, Tomasz Kłoczko <kloczko.tomasz@xxxxxxxxx> wrote: > Tested minimal and server images on RPi 3. > > Two issues: > - boot OOPSes in mmc card initialisation (just before remount to root fs) > and if it is not freezes completely ends in dracut prompt > - USB keyboard is not working when dracut prompt is reached (keyboard is OK > as I'm able to use it in uboot prompt) Can you try adding module_blacklist=bcm2835-dma to the kernel command line and see if that helps. > I've started testing those images because my original +5 months almost ever > day updated rawhide bases system has been bricked somewhere after kernel > 4.11 rc2 when it seems RPi 3 firmware has been updated. After this last > update I found that my RPi 3 is not bringing up eth interface. Trying to > diagnose this issue I found that additionally usb keyboard was cut off as > well. > Seems what was introduced after first 4.11 ~rc2 kernel now is part of every > day regenerated images. > > Would be glad if someone could confirm the same effects on RPi 3 (to be sure > that my HW still is OK). > > kloczek > -- > Tomasz Kłoczko | LinkedIn: http://lnkd.in/FXPWxH > > _______________________________________________ > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx > _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
