On Tue, Dec 20, 2016 at 5:08 AM, Robert Moskowitz <rgm@xxxxxxxxxxxxxxx> wrote: > I have been gone, doing other stuff for a year. Back now trying to do a > number of things. One is using the current uboot alone on the mSD and > everything else on sata. > > Back a year+ ago, I would dd the image to a sata HD and just the uboot to a > 4Gb mSD card. I had even provided a modification to the installer script > here for this purpose. > > It worked well. But now... > > With only the uboot on the mSD by: > > dd if=u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8 ; sync > > I get: > > > U-Boot SPL 2016.09.01 (Oct 19 2016 - 13:46:44) > DRAM: 1024 MiB > CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 > Trying to boot from MMC1 > > > U-Boot 2016.09.01 (Oct 19 2016 - 13:46:44 +0000) Allwinner Technology > > CPU: Allwinner A20 (SUN7I) > Model: Cubietech Cubieboard2 > I2C: ready > DRAM: 1 GiB > MMC: SUNXI SD/MMC: 0 > In: serial > Out: serial > Err: serial > SCSI: Target spinup took 0 ms. > AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode > flags: ncq stag pm led clo only pmp pio slum part ccc apst > Net: eth0: ethernet@01c50000 > Hit any key to stop autoboot: 0 > ** Invalid partition 1 ** > ** Invalid partition 1 ** > ** Invalid partition 1 ** > => > > Has there been some change to the Cubieboard uboot? No, not that I'm aware of but not to say but there wasn't something upstream, There was some changes to partitioning. Make sure the /boot partition has the boot flag set. _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
