I have been gone, doing other stuff for a year. Back now trying to do a
number of things. One is using the current uboot alone on the mSD and
everything else on sata.
Back a year+ ago, I would dd the image to a sata HD and just the uboot
to a 4Gb mSD card. I had even provided a modification to the installer
script here for this purpose.
It worked well. But now...
With only the uboot on the mSD by:
dd if=u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8 ; sync
I get:
U-Boot SPL 2016.09.01 (Oct 19 2016 - 13:46:44)
DRAM: 1024 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1
U-Boot 2016.09.01 (Oct 19 2016 - 13:46:44 +0000) Allwinner Technology
CPU: Allwinner A20 (SUN7I)
Model: Cubietech Cubieboard2
I2C: ready
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
In: serial
Out: serial
Err: serial
SCSI: Target spinup took 0 ms.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: eth0: ethernet@01c50000
Hit any key to stop autoboot: 0
** Invalid partition 1 **
** Invalid partition 1 **
** Invalid partition 1 **
=>
Has there been some change to the Cubieboard uboot?
Thank you
_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
