Am 03.05.2016 um 19:31 schrieb Peter Robinson: > On Tue, May 3, 2016 at 5:52 PM, Andreas Reschke <arm_ml@xxxxxxxxxxx> wrote: >> Am 03.05.2016 um 17:48 schrieb Peter Robinson: >>>>>> Hi there, >>>>>> now the board is on my table. >>>>>> >>>>>> The only image i've found is >>>>>> linaro-desktop-cubietruck-plus-card-dp-v1.1.img. But I don't think its a >>>>>> real aarch64 Image: >>>>>> >>>>>> linaro@cubietruck-plus:~$ uname -a >>>>>> Linux cubietruck-plus 3.4.39 #7 SMP PREEMPT Tue Mar 1 09:34:33 CST 2016 >>>>>> armv7l armv7l armv7l GNU/Linux >>>>>> linaro@cubietruck-plus:~$ >>>>>> I think this should be armv8l ? >>>>>> >>>>>> Is there any howto to create/build a aarch64 Image on a Cubieboard 5 with >>>>>> Fedora ? >>>>> Is this a real aarch64 board? As far as I can tell [1], although their >>>>> website is terrible on the details, it's a ARMv7 device not a aarch64 >>>>> device. >>>>> >>>>> Peter >>>>> >>>>> [1] http://linux-sunxi.org/Cubietech_Cubietruck_Plus >>>> >>>> Hello Peter, >>>> >>>> you're right. It's my mistake. >>>> CB5 Vs CB3| Cubietruck(CB3)|CubieTruck Plus(CB5) >>>> SOC |Allwinnertech A20 |Allwinnertech H8 >>>> Dual-Core,Cortex-A7,upto 1.08GHz | Octa-Core,Cortex-A7,upto CPU 2.0GHz >>>> >>>> They're both A7. >>>> >>>> I will test it with aktuell Fedora and CentOS 32Bit. >>> So this should work with Fedora 25 nightly images like the minimal. >>> Both the u-boot and kernel now have support for the CubieTruck Plus >>> note I have not tested it and don't have HW so YMMV but any feedback >>> is welcome and if there's issues you report we should be able to get >>> them fixed. >>> >>> [1] http://koji.fedoraproject.org/koji/taskinfo?taskID=13900802 >> Hallo Peter, >> thanks for the quick response. I've dd'ed this Image, but no success. >> Only the red light. >> Must I write this Image like the howto >> https://fedoraproject.org/wiki/Architectures/ARM/F23/Installation ? > > You'll need to dd out a u-boot like all other arm devices. I suggest > you do this with arm-image-installer, but you'll need to create a > symlink for the device > > on the host : > > "sudo dnf install fedora-arm-installer" > "sudo ln -s /usr/share/arm-image-installer/socs.d/AllWinner > /usr/share/arm-image-installer/boards.d/Cubietruck_plus" > "sudo arm-image-installer > --image=Fedora-Minimal-armhfp-Rawhide-20160503.n.0-sda.raw.xz > --target=Cubietruck_plus --media=<INSERT SD CARD DEV NAME>" > > I have no idea if the display outputs, if you have a serial console > add --console to the end of the arm-image-installer commands. > > PS please keep conversation on list > _______________________________________________ > arm mailing list > arm@xxxxxxxxxxxxxxxxxxxxxxx > http://lists.fedoraproject.org/admin/lists/arm@xxxxxxxxxxxxxxxxxxxxxxx Hello Peter, thanks for the smal howto. What I did: - dnf install fedora-arm-installer - ln -s /usr/share/fedora-arm-installer/socs.d/AllWinner /usr/share/fedora-arm-installer/boards.d/Cubietruck_plus (Wrong path) - [root@hp635 Downloads]# fedora-arm-image-installer --image=Fedora-Minimal-armhfp-Rawhide-20160503.n.0-sda.raw.xz --target=Cubietruck_plus --media=/dev/sdb ===================================================== = Selected Image: = Fedora-Minimal-armhfp-Rawhide-20160503.n.0-sda.raw.xz = Selected Media : /dev/sdb = U-Boot Target : Cubietruck_plus ===================================================== ***************************************************** ***************************************************** ******** WARNING! ALL DATA WILL BE DESTROYED ******** ***************************************************** ***************************************************** Type 'YES' to proceed, anything else to exit now = Proceed? YES = Writing: = Fedora-Minimal-armhfp-Rawhide-20160503.n.0-sda.raw.xz = To: /dev/sdb .... 0+224841 Datensätze ein 0+224841 Datensätze aus 2146435072 Bytes (2,1 GB) kopiert, 206,405 s, 10,4 MB/s = Writing image complete! = Writing u-boot-sunxi-with-spl.bin .... 390+1 Datensätze ein 390+1 Datensätze aus 400326 Bytes (400 kB) kopiert, 0,0318274 s, 12,6 MB/s = Installation Complete! Insert into the Cubietruck_plus and boot. [root@hp635 Downloads]# No boot, just the one red light, nothing else, no screen. Greetings Andreas _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx http://lists.fedoraproject.org/admin/lists/arm@xxxxxxxxxxxxxxxxxxxxxxx
