On Tue, May 3, 2016 at 5:52 PM, Andreas Reschke <arm_ml@xxxxxxxxxxx> wrote: > Am 03.05.2016 um 17:48 schrieb Peter Robinson: >>>>> Hi there, >>>>> now the board is on my table. >>>>> >>>>> The only image i've found is >>>>> linaro-desktop-cubietruck-plus-card-dp-v1.1.img. But I don't think its a >>>>> real aarch64 Image: >>>>> >>>>> linaro@cubietruck-plus:~$ uname -a >>>>> Linux cubietruck-plus 3.4.39 #7 SMP PREEMPT Tue Mar 1 09:34:33 CST 2016 >>>>> armv7l armv7l armv7l GNU/Linux >>>>> linaro@cubietruck-plus:~$ >>>>> I think this should be armv8l ? >>>>> >>>>> Is there any howto to create/build a aarch64 Image on a Cubieboard 5 with >>>>> Fedora ? >>>> >>>> Is this a real aarch64 board? As far as I can tell [1], although their >>>> website is terrible on the details, it's a ARMv7 device not a aarch64 >>>> device. >>>> >>>> Peter >>>> >>>> [1] http://linux-sunxi.org/Cubietech_Cubietruck_Plus >>> >>> >>> Hello Peter, >>> >>> you're right. It's my mistake. >>> CB5 Vs CB3| Cubietruck(CB3)|CubieTruck Plus(CB5) >>> SOC |Allwinnertech A20 |Allwinnertech H8 >>> Dual-Core,Cortex-A7,upto 1.08GHz | Octa-Core,Cortex-A7,upto CPU 2.0GHz >>> >>> They're both A7. >>> >>> I will test it with aktuell Fedora and CentOS 32Bit. >> So this should work with Fedora 25 nightly images like the minimal. >> Both the u-boot and kernel now have support for the CubieTruck Plus >> note I have not tested it and don't have HW so YMMV but any feedback >> is welcome and if there's issues you report we should be able to get >> them fixed. >> >> [1] http://koji.fedoraproject.org/koji/taskinfo?taskID=13900802 > > Hallo Peter, > thanks for the quick response. I've dd'ed this Image, but no success. > Only the red light. > Must I write this Image like the howto > https://fedoraproject.org/wiki/Architectures/ARM/F23/Installation ? You'll need to dd out a u-boot like all other arm devices. I suggest you do this with arm-image-installer, but you'll need to create a symlink for the device on the host : "sudo dnf install fedora-arm-installer" "sudo ln -s /usr/share/arm-image-installer/socs.d/AllWinner /usr/share/arm-image-installer/boards.d/Cubietruck_plus" "sudo arm-image-installer --image=Fedora-Minimal-armhfp-Rawhide-20160503.n.0-sda.raw.xz --target=Cubietruck_plus --media=<INSERT SD CARD DEV NAME>" I have no idea if the display outputs, if you have a serial console add --console to the end of the arm-image-installer commands. PS please keep conversation on list _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx http://lists.fedoraproject.org/admin/lists/arm@xxxxxxxxxxxxxxxxxxxxxxx
