Re: Cubietruck failure with Fedora-Xfce-armhfp-23-3 (4.2.3-300.fc23.armv7hl)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 23, 2015 at 6:34 PM, Robert Moskowitz <rgm@xxxxxxxxxxxxxxx> wrote:
> It has been a while since I tried any Fedora-23 builds what with a number of
> things going on.  So seeing the go/nogo, I figured I better run a test and
> as you can see it failed (and I tried booting twice with this image and got
> the same results):
>
>
> U-Boot SPL 2015.07 (Sep 12 2015 - 10:46:32)
> DRAM: 2048 MiB
> CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
>
>
> U-Boot 2015.07 (Sep 12 2015 - 10:46:32 +0000) Allwinner Technology
>
> CPU:   Allwinner A20 (SUN7I)
> I2C:   ready
> DRAM:  2 GiB
> MMC:   SUNXI SD/MMC: 0
> *** Warning - bad CRC, using default environment
>
> Setting up a 1024x768 vga console
> In:    serial
> Out:   vga
> Err:   vga
> SCSI:  SUNXI SCSI INIT
> SATA link 0 timeout.
> AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
> flags: ncq stag pm led clo only pmp pio slum part ccc apst
> Net:   eth0: ethernet@01c50000
> starting USB...
> USB0:   USB EHCI 1.00
> USB1:   USB OHCI 1.0
> USB2:   USB EHCI 1.00
> USB3:   USB OHCI 1.0
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning bus 2 for devices... 1 USB Device(s) found
> scanning bus 1 for devices... unable to get device descriptor (error=-1)
> 1 USB Device(s) found
> scanning bus 3 for devices... 1 USB Device(s) found
> Hit any key to stop autoboot:  0
> switch to partitions #0, OK
> mmc0 is current device
> Scanning mmc 0:1...
> Found /extlinux/extlinux.conf
> Retrieving file: /extlinux/extlinux.conf
> 494 bytes read in 127 ms (2.9 KiB/s)
> Ignoring unknown command: ui
> Ignoring malformed menu command:  autoboot
> Ignoring malformed menu command:  hidden
> Ignoring unknown command: totaltimeout
> Fedora-Xfce-armhfp-23-3 Boot Options.
> 1:    Fedora-Xfce-armhfp-23-3 (4.2.3-300.fc23.armv7hl)
> Enter choice: 1:    Fedora-Xfce-armhfp-23-3 (4.2.3-300.fc23.armv7hl)
> Retrieving file: /initramfs-4.2.3-300.fc23.armv7hl.img
>  ** ext4fs_devread read error - block
> Skipping Fedora-Xfce-armhfp-23-3 (4.2.3-300.fc23.armv7hl) for failure

That looks like an issue with your storage, mine boots fine off a SATA
SSD with that kernel
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux ARM (Vger)]     [Linux ARM]     [ARM Kernel]     [Fedora User Discussion]     [Older Fedora Users Discussion]     [Fedora Advisory Board]     [Fedora Security]     [Fedora Maintainers]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Mentors]     [Fedora Package Announce]     [Fedora Package Review]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Coolkey]     [Yum Users]     [Tux]     [Yosemite News]     [Linux Apps]     [KDE Users]     [Fedora Tools]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]

Powered by Linux