Hi,
On 02-03-15 19:56, Robert Moskowitz wrote:
On 03/02/2015 01:32 PM, Hans de Goede wrote:
Hi,
On 02-03-15 14:36, Robert Moskowitz wrote:
On 03/02/2015 03:09 AM, Hans de Goede wrote:
Hi,
On 01-03-15 02:59, Robert Moskowitz wrote:
When I first was testing the sata boot, I did not have the sata drive connected properly, and I watched the system also try to scan usb. So I thought, that maybe usb boot was also enabled. I powered down and did the sata test successfully.
So this evening I put the partitions on an IDE drive connected via a USB adapter. The drive is rated at .5A, and works fine on my notebook. I plugged it into my Cubietruck and as you will see below, the partitions were found. The USB adapter was plugged into the top USB port, and a USB hub that has the keyboard and mouse were plugged into the lower USB port. I have a USB IDE enclosure that provides 1A (one of those with 2 USB male plugs, I can put the second into a USB powersupply) if you think the failure was power related. I really don't so won't try that test unless asked. Bottom
line
is those of us with a SATA port have sata boot. Those without will have to at least keep the /boot partition on the SD card to point to the USB drive.
USB1: USB EHCI 1.00
scanning bus 1 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Note how u-boot says that it is not seeing any usb storage devices...
My first hunch is that the drive is simply not getting enough power,
try with a usb "stick" type device, that should work.
I put it in a powered USB/IDE enclousure and it started the boot, but then failed. I am including the beginning and ending of the serial console, which is 30K long, so I am not posting it to this list. If anyone wants the whole console capture, tell me where to send it.
[ 214.026523] audit: type=1131 audit(214.005:13): pid=1 uid=0 auid=4294967295 s
es=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/
systemd/systemd" hostname=? addr=? terminal=? res=success'
Warning: /dev/disk/by-uuid/77c64937-ac75-40ed-9607-e781e24b4686 does not exist
Generating "/run/initramfs/rdsosreport.txt"
Entering emergency mode. Exit the shell to continue.
Type "journalctl" to view system logs.
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot
after mounting them and attach it to a bug report.
dracut:/#
=================================
I have also saved /run/initramfs/rdsosreport.txt if you want to see that.
This looks to me like your ramdisk / initrd does not contain the necessary usb modules.
So what are the necessary usb modules and how do I get them? This USB drive was built from:
you need ehci_platform and ohci_platform and phy_sun4i_usb and their deps. They are already
on your system, you need to regenerate the initrd with them included.
Regards,
Hans
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
