Re: sata boot working, but not usb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 01-03-15 02:59, Robert Moskowitz wrote:
When I first was testing the sata boot, I did not have the sata drive connected properly, and I watched the system also try to scan usb.  So I thought, that maybe usb boot was also enabled.  I powered down and did the sata test successfully.

So this evening I put the partitions on an IDE drive connected via a USB adapter.  The drive is rated at .5A, and works fine on my notebook.  I plugged it into my Cubietruck and as you will see below, the partitions were found.  The USB adapter was plugged into the top USB port, and a USB hub that has the keyboard and mouse were plugged into the lower USB port.  I have a USB IDE enclosure that provides 1A (one of those with 2 USB male plugs, I can put the second into a USB powersupply) if you think the failure was power related.  I really don't so won't try that test unless asked. Bottom line
is those of us with a SATA port have sata boot.  Those without will have to at least keep the /boot partition on the SD card to point to the USB drive.

Here is the console capture:

U-Boot SPL 2015.01 (Feb 07 2015 - 22:09:40)
DRAM: 2048 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2


U-Boot 2015.01 (Feb 07 2015 - 22:09:40) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
I2C:   ready
DRAM:  2 GiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

Reserved 8192kB of RAM for Framebuffer.
HDMI connected.
Setting up a 1024x768 console.
In:    serial
Out:   vga
Err:   vga
SCSI:  SUNXI SCSI INIT
SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net:   dwmac.1c50000
(Re)start USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 4 USB Device(s) found
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 1 USB Device(s) found
        scanning usb for storage devices... 0 Storage Device(s) found

Note how u-boot says that it is not seeing any usb storage devices...

My first hunch is that the drive is simply not getting enough power,
try with a usb "stick" type device, that should work.

Regards,

Habs
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux ARM (Vger)]     [Linux ARM]     [ARM Kernel]     [Fedora User Discussion]     [Older Fedora Users Discussion]     [Fedora Advisory Board]     [Fedora Security]     [Fedora Maintainers]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Mentors]     [Fedora Package Announce]     [Fedora Package Review]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Coolkey]     [Yum Users]     [Tux]     [Yosemite News]     [Linux Apps]     [KDE Users]     [Fedora Tools]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]

Powered by Linux