On 02/25/2015 09:33 AM, Robert Moskowitz wrote: > > On 02/25/2015 09:19 AM, Cole Robinson wrote: >> Hey all, >> >> First time trying to setup my cubietruck/cubieboard3. I used >> fedora-arm-installer[1] to fill in an 8GB sd card on my host machine, using >> Fedora-Minimal-armhfp-21-5-sda.raw.xz. > > Did you include > > --target=Cubietruck > Yes, I used --target=Cubietruck. > on the installer script command? (case insensitive, ir you read the script) > > I have run this successfully on my Cubietruck and Cubieboard2 (I sent in a > script change to support the C2, don't know if it has been rolled in). > > Though I am now working with F22 Alpha to get video support. > >> Pop it into my cubietruck, connect via serial console, start it up. Machine >> passes uboot fine and boots the initrd, but eventually fails waiting for the >> root mount point to show up, and falls back to dracut. > > Mount the card on your host system and see that you get the __boot and __ > partitions. Perhaps there is something wrong with your card install step. > After I build an SD card, I use gparted to increase the __ partition to max > size for the card. The I pull out the card from my host system. I would like > to see this step automated in the script. > The sdcard mounts fine on multiple machines using an sd-to-usb adapter, and all partitions are accounted for. That's the only other way I have to test an sdcard Thanks, Cole _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
