On Mon, 2015-02-16 at 16:25 +0100, Jurgen Kramer wrote: > On Mon, 2015-02-16 at 15:45 +0100, Jurgen Kramer wrote: > > The remix works great, nice work! > > > > Checked to see if the pi camera worked, but so far could not get it > > working. > > > > 'vcgencmd get_camera' gives: > > supported=0 detected=0 > OK, got it working. After checking raspi-config on raspian: > > start_file=start_x.elf in /boot/config.txt > > (I already had gpumem set to 128M). I'll add a note of that to the config.txt, that you need "start_file=start_x.elf" to end up with a working camera. Actually Jugen, if you have a spare half hour and a spare SDCARD, can you join Adrian and give the tires of that "test" xfce "spin" a kick. http://www.digitaldreamtime.co.uk/Fedora/Pi2B-Fedora-Xfce-armhfp-21-5-20150217-1-sda.raw.xz It's good that you are using vcgencmd. Give that some use too! It's now built from source on the xfce image using Fedora compile options. (On the Minimal image was still following the Pidora way of doing things, using the pre-compiled binaries from RPi firmware git.) So a little testing in that area would be good! ;) Clive -- Clive Messer <clive.m.messer@xxxxxxxxx> _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
