On 19 December 2014 19:00:17 GMT+08:00, "Пламен Христов" <plamenhhristov@xxxxxxxxx> wrote: >2014-12-18 8:08 GMT+02:00 Peter Robinson <pbrobinson@xxxxxxxxx>: >> >> >> >> I'm running F-21 on two revisions of the Panda-ES without issues. I'm >> running one with a minimal install and one with XFCE. >> >> I've not seen any errors around thermal errors even when compiling >> things. Have you tried installing the kernel-tools package and >running >> the tmon util? My devices sit at around 30 degrees at idle. >> >> The wlcore module error is a known issue. I black list them as I >don't >> use wireless. The chip needs a userspace util called uim to put the >> chip into the right mode, also the patches to support DeviceTree >> haven't landed upstream. In general the WiLink wireless drivers >aren't >> in a great state. >> >> I create a file called: >> /etc/modprobe.d/blacklist-wlcore.conf >> And add the following two lines: >> blacklist wl12xx >> blacklist wlcore >> >> I can't help with the other error without more information. Overall >> with F-21 GA the Panda-ES does work relatively well in my experience. >> There's certainly some improvements to be made but it's generally >very >> usable with XFCE or as a minimal install system. >> >> Peter >> > >Thank You fo reply, Peter! > >I'have installed kernel-tools and banned wlcore. Than reboot before >make >new logs. >Tmon indicates ~50C at Idle and goes 79 with little load. Based on Is it really idle? Something seems to be making him abnormally hot. Any clues in top or cat /proc/interrupts? >previous >expiriance it can't survive full system update, without termal >shutdown. > >Here is my logs: >http://pastebin.com/L118YkDt >http://pastebin.com/pfSLR2Fe >http://pastebin.com/NH4G5egN > >Last time I forgot to mention that mouse is working badly, but think It's be nice if there was some interrupt going nuts we could see in /proc/interrupts making execessive latency. How about the U-Boot / MLO pieces? They have nasty deps like gpu clock state and default GPIO state. If the only clue is excess heat it can be something like a contended SoC GPIO. -Andy >that >this is not important now. I use XFCE edition of F21. Power adapter is >2250 >mA and I think that is OK also. > > >------------------------------------------------------------------------ > >_______________________________________________ >arm mailing list >arm@xxxxxxxxxxxxxxxxxxxxxxx >https://admin.fedoraproject.org/mailman/listinfo/arm _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
