On Wed, Dec 17, 2014 at 11:14 AM, Пламен Христов <plamenhhristov@xxxxxxxxx> wrote: > Hello, > Recently I tried F21 on that board. The result was a bit disappointing... > > Apperently Fedora has several issues with that hardware: > - thermal shutdown, after message something like "kernel trap/thermal > zone/core0" > - wlcore module error > - some other error, possibly related to swap module /Need to redo testing > here, not captured on logs/ I'm running F-21 on two revisions of the Panda-ES without issues. I'm running one with a minimal install and one with XFCE. I've not seen any errors around thermal errors even when compiling things. Have you tried installing the kernel-tools package and running the tmon util? My devices sit at around 30 degrees at idle. The wlcore module error is a known issue. I black list them as I don't use wireless. The chip needs a userspace util called uim to put the chip into the right mode, also the patches to support DeviceTree haven't landed upstream. In general the WiLink wireless drivers aren't in a great state. I create a file called: /etc/modprobe.d/blacklist-wlcore.conf And add the following two lines: blacklist wl12xx blacklist wlcore I can't help with the other error without more information. Overall with F-21 GA the Panda-ES does work relatively well in my experience. There's certainly some improvements to be made but it's generally very usable with XFCE or as a minimal install system. Peter _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
