On 15/12/14 16:32, Peter Robinson wrote:
On Mon, Dec 15, 2014 at 5:24 AM, Robert Brown <rebrown@xxxxxxxxxxxxxx> wrote:
Thanks for the reply Peter.
On 15/12/14 15:58, Peter Robinson wrote:
On Mon, Dec 15, 2014 at 4:52 AM, Robert Brown <rebrown@xxxxxxxxxxxxxx>
wrote:
Found several log files with date 01/01/1970 (attached).
/var/log/chrony was empty.
Would be until network comes up and chrony can start
Messages log reports:
EXYNOS: PMU not supported and
edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
edma-dma-engine: probe of edma-dma-engine.0 failed with error -22
All spurious, for HW other than AllWinner
fairly early on. And
ahci-sunxi 1c18000.sata: PHY power up failed.
ahci-sunxi: probe of 1c18000.sata failed with error -5
Do you have a SATA device attached?
No sata device attached.
Generated key 1
Fatal error : getpwnam(chrony) failed
getpwnam(chrony) failed
A search found all of these were empty:
/media/rbrown/__/etc/systemd/user
/media/rbrown/__/etc/xdg/systemd/user
/media/rbrown/__/var/kerberos/krb5/user
/media/rbrown/__/usr/share/perl5/User
/media/rbrown/__/usr/lib/systemd/user
/media/rbrown/__/run/user
First things to check for?
Maybe I missed in it earlier posts but what A10 device are you using?
This is a Rikomagic MK802II hdmi device. Trying to boot headless with no
serial console!
What uboot are you using, are you specifying a .dtb file, if so what one?
Peter
I have applied /usr/share/uboot/Mele_A1000/u-boot-sunxi-with-spl.bin
using dd. This Mele device has shown a very high compatibility
previously with the MK802II. Other u-boot options that I could try might
be Cubieboard (1) and maybe A10-OLinuXino-Lime but less sure of this
last one.
Is my understanding correct that this step would have applied
sun4i-a10-a1000.dtb or have I missed a step?
Rob
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
