On 08/12/14 22:11, Robert Moskowitz wrote:
On 12/08/2014 05:16 AM, Robert Brown wrote:
Thanks for the reply.
On 08/12/14 14:43, Peter Robinson wrote:
On Fri, Dec 5, 2014 at 10:57 PM, Robert Brown
<rebrown@xxxxxxxxxxxxxx> wrote:
Anyone working on a FC21 image for the A10? My device does not give me
access to a serial monitor so am hoping to change the dtb file for
the A10
on a remix build and get this unit booting on 3.17.
Thanks
You don't mention what your device is but a change in the .dtb won't
fix the lack of display, there's a complete lack of driver,
Yes my wording could have been better.
Changing the .dtb was only about getting the device to boot as I
realise hdmi is not yet ready.
The device is a Rikomagic MK802II. Booting it headless with 3.17 is
my aim but the soldering job for a serial console is a challenge
beyond my soldering skills - see
http://www.rikomagic.co.uk/forum/viewtopic.php?f=6&t=2488
so am hoping some-one with a compatible device such as Mele A1000 or
CB1 could develop an image. A howto for the build and to get wireless
configured for an ssh connection is an alternative.
You could just try booting without serial console if you provide
--norootpass on building the SD card. SSHD permits logging in as
root, just don't do this on the Internet, as you are sitting wide open!
I think I would need to manually configure and select my local network
SSID and passphrase to get it on the network so I can ssh to it. A new
world for me under systemd.
Thinking about the firstboot script the only really needed things it
does is set the timezone and root password. You can add your user
after logging in as root.
I would suspect that if no serial console, it just comes up as ready
as possible. All you need is your WiFi to be working; that is a
pretty big assumption. You might have to get a supported ethernet
dongle.
As above.
What has happened in booting without a serial console so far?
I am running blind so I either see a new connection open up when I do an
nmap search from my PC or more likely there is no new connection for the
reasons I mention. The real trick is to know if I have even had a
successful boot.
Thanks
Rob
I've generated Fedora 20 images for Allwinner A{10,20,...} devices
using
Hans'
scripts. It's basically a stock Xfce image with sunxi u-boot and
sunxi-3.4 linux kernel. Available here: [1], please read the README
[2] file for installation instructions. I've only tested on an A10
based Cubieboard so far and I would be thankful for any feedback;
reports about other boards that should be supported in particular.
[1] http://fedorapeople.org/~lkundrak/a10-images/
[2] http://fedorapeople.org/~lkundrak/a10-images/README
♥,
Lubo
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
