Hi Jaromir,
The application builds and runs on x86_64 openSUSE and Ubuntu, Ubuntu on
ODROID-X, Raspberry Pi with Raspbian and also with Ubuntu on Pandaboard.
With openSUSE ARM and Fedora ARM it seems to get confused about the
architecture.
In configure.log
root@panda:/1/ghpsdr3-alex# grep ARM config.log
configure:15863: Platform: ARM 7
conftest.c:1:0: error: target CPU does not support ARM mode
conftest.c:1:0: error: target CPU does not support ARM mode
conftest.c:1:0: error: target CPU does not support ARM mode
./configure CFLAGS='-O3 -pipe -mfpu=neon -fno-tree-vectorize -flto
-fopenmp' CXXFLAGS='-O3 -pipe -mfpu=neon -fno-tree-vectorize -flto -fopenmp'
or simply with just
./configure
Regards
Sid.
On 19/11/13 18:36, Jaromir Capik wrote:
Hello Sid.
I just tested your scenario on ECX-1000 with the official F20
images and the same result ...
That means it isn't related to the changes made by me.
It looks more like an autotools related issue.
Have you tested that on x86 ?
Thanks,
Jaromir.
--
Jaromir Capik
Red Hat Czech, s.r.o.
Software Engineer / Secondary Arch
Email: jcapik@xxxxxxxxxx
Web: www.cz.redhat.com
Red Hat Czech s.r.o., Purkynova 99/71, 612 45, Brno, Czech Republic
IC: 27690016
----- Original Message -----
From: "Sid Boyce" <sboyce@xxxxxxxxxxxxxxxx>
To: arm@xxxxxxxxxxxxxxxxxxxxxxx
Sent: Tuesday, November 12, 2013 3:34:47 AM
Subject: Re: F20 Beta 5 (XFCE) remix for PandaBoard
On 12/11/13 01:06, Sid Boyce wrote:
On 08/11/13 17:35, Jaromir Capik wrote:
Hello everyone.
I created a Fedora 20 Beta 5 remix for Panda and would appreciate
some tests. The image is XFCE only (can add more later).
You can download the image here:
http://jcapik.fedorapeople.org/files/ARM/f20-remixes/
Please, let me know whether it works for you ...
NOTE: It uses the old F19 kernel as the new F20 kernel doesn't boot
on Panda -> do not update the kernel.
Thanks in advance.
Regards,
Jaromir.
--
Jaromir Capik
Red Hat Czech, s.r.o.
Software Engineer / Secondary Arch
Email: jcapik@xxxxxxxxxx
Web: www.cz.redhat.com
Red Hat Czech s.r.o., Purkynova 99/71, 612 45, Brno, Czech Republic
IC: 27690016
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
I installed all the pre-req packages and I see some configure errors
in ghpsdr3-alex that I had only ever seen these errors with openSUSE
ARM on ODROID-X, never on Pandaboard Ubuntu nor ODROID-X Ubuntu.
Build instructions:-
http://napan.ca/ghpsdr3/index.php/QtRadio_Installation#Fedora
sudo yum install gcc gcc-c++ man-pages autoconf automake subversion
libtool git
This is on Pandaboard A3 with Qt-5.2.0, it needs Qt5.
#!/bin/sh
sudo yum install fftw fftw-devel
sudo yum install libusb-devel libusb1-devel
sudo yum install portaudio-devel
sudo yum install libconfig-devel
sudo yum install libsamplerate-devel
sudo yum install pulseaudio-libs-devel
sudo yum install jack-audio-connection-kit
jack-audio-connection-kit-devel
sudo yum install qt4-devel
codec2-dev:-
svn co https://freetel.svn.sourceforge.net/svnroot/freetel/codec2-dev
codec2-dev
The source is from "git clone
git://github.com/alexlee188/ghpsdr3-alex.git"
"cd ghpsdr3-alex"
"autoreconf -i"
"./configure".
Part of the error messages:-
checking for python script directory...
${prefix}/lib/python2.7/site-packages
checking for python extension module directory...
${exec_prefix}/lib/python2.7/site-packages
configure: Platform: ARM 7
configure: -O3 -pipe -march=armv7 -mfpu=neon -fno-tree-vectorize -fopenmp
configure: -O3 -pipe -march=armv7 -mfpu=neon -fno-tree-vectorize -fopenmp
checking for library containing round... no
checking for library containing pthread_create... no
checking for library containing Pa_Initialize... no
checking for library containing fftwf_malloc... no
checking for library containing codec2_create... no
checking for library containing pa_simple_new... no
checking for library containing pa_strerror... no
checking for library containing usb_init... no
checking for library containing jack_client_open... no
checking for library containing config_init... no
checking for library containing libusb_init... no
checking for library containing event_init... no
checking for library containing evthread_use_pthreads... no
checking for library containing bufferevent_openssl_socket_new... no
checking for library containing src_new... no
checking for library containing ortp_init... no
checking for library containing omp_get_active_level... no
checking for size_t... no
checking for working alloca.h... no
checking for alloca... no
checking whether `alloca.c' needs Cray hooks... no
checking stack direction for C alloca... -1
checking arpa/inet.h usability... no
checking arpa/inet.h presence... yes
configure: WARNING: arpa/inet.h: present but cannot be compiled
configure: WARNING: arpa/inet.h: check for missing prerequisite
headers?
configure: WARNING: arpa/inet.h: see the Autoconf documentation
configure: WARNING: arpa/inet.h: section "Present But Cannot Be
Compiled"
configure: WARNING: arpa/inet.h: proceeding with the compiler's result
configure: WARNING: ##
--------------------------------------------- ##
configure: WARNING: ## Report this to andrew att montefusco dott
com ##
configure: WARNING: ##
--------------------------------------------- ##
checking for arpa/inet.h... no
checking fcntl.h usability... no
checking fcntl.h presence... yes
configure: WARNING: fcntl.h: present but cannot be compiled
configure: WARNING: fcntl.h: check for missing prerequisite headers?
configure: WARNING: fcntl.h: see the Autoconf documentation
configure: WARNING: fcntl.h: section "Present But Cannot Be Compiled"
configure: WARNING: fcntl.h: proceeding with the compiler's result
configure: WARNING: ##
--------------------------------------------- ##
configure: WARNING: ## Report this to andrew att montefusco dott
com ##
configure: WARNING: ##
--------------------------------------------- ##
checking for fcntl.h... no
checking limits.h usability... no
checking limits.h presence... yes
configure: WARNING: limits.h: present but cannot be compiled
configure: WARNING: limits.h: check for missing prerequisite headers?
configure: WARNING: limits.h: see the Autoconf documentation
configure: WARNING: limits.h: section "Present But Cannot Be
Compiled"
configure: WARNING: limits.h: proceeding with the compiler's result
configure: WARNING: ##
--------------------------------------------- ##
configure: WARNING: ## Report this to andrew att montefusco dott
com ##
configure: WARNING: ##
--------------------------------------------- ##
checking for limits.h... no
checking malloc.h usability... no
checking malloc.h presence... yes
configure: WARNING: malloc.h: present but cannot be compiled
configure: WARNING: malloc.h: check for missing prerequisite headers?
configure: WARNING: malloc.h: see the Autoconf documentation
configure: WARNING: malloc.h: section "Present But Cannot Be
Compiled"
##And many other such WARNING messages and ending with ##
checking for unistd.h... (cached) yes
configure: error:
-----------------------------------
The pthread library and header file required to build ghpsdr3.
root@panda:/1/ghpsdr3-alex# l /usr/include/pthread.h
-rw-r--r--. 1 root root 41510 Oct 3 07:28 /usr/include/pthread.h
root@panda:/1/ghpsdr3-alex# l /usr/lib/libpthread*
-rwxr-xr-x. 1 root root 126448 Oct 3 09:05 /usr/lib/libpthread-2.18.so*
-rw-r--r--. 1 root root 1512 Oct 3 09:06
/usr/lib/libpthread_nonshared.a
-rw-r--r--. 1 root root 221 Oct 3 07:28 /usr/lib/libpthread.so
lrwxrwxrwx. 1 root root 18 Nov 6 21:03 /usr/lib/libpthread.so.0
-> libpthread-2.18.so*
Regards
Sid.
root@panda:/1/ghpsdr3-alex# uname -a
Linux panda 3.9.5-301.fc19.armv7hl #1 SMP Wed Jun 12 14:56:17 UTC 2013
armv7l armv7l armv7l GNU/Linux
root@panda:/1/ghpsdr3-alex# yum list *headers*
Loaded plugins: langpacks
Installed Packages
glibc-headers.armv7hl 2.18-11.fc20 @fedora
kernel-headers.armv7hl 3.11.7-300.fc20
Possibly kernel headers newer than running kernel?
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
