Hi,
On 10/01/2013 07:10 PM, Niels de Vos wrote:
On Sat, Sep 14, 2013 at 09:55:38PM +0200, Hans de Goede wrote:
Hi All,
I'm very happy to announce the second release (r2) of my Fedora 19 ARM
remix images for Allwinner A10, A10s, A13 and A20 based devices. This
release is based on the official Fedora 19 Final for ARM images,
with u-boot and kernel(s) from the linux-sunxi project:
http://linux-sunxi.org/
Thanks for the new image! I've tried to run it on my Cubieboard (1024MB)
but it fails to boot. This seems to be the same on the 1st image, sorry
I did not check that earlier :-/
There seems to be an issue with the 'spl', and maybe something more.
Attached is a capture from the serial port showing the reboot-loop that
uboot does.
Yes I made a bad mistake in r2 adding some a20 u-boot fixex at the last
moment which break booting on the a10s
The attched logs don't seem to be from this problem though, is this
with r1 ?
How are you powering the board ? Powering it on the uarrt connector (through
a usb <-> serial convertor) generally leads to quite unreliable operation.
Regards,
Hans
_______________________________________________
arm mailing list
arm@xxxxxxxxxxxxxxxxxxxxxxx
https://admin.fedoraproject.org/mailman/listinfo/arm
