Hi, On 09/19/2013 03:47 PM, davide.soldan.kynetics@xxxxxxxxx wrote:
Hi Hans, I'm having a problem testing your fedora 19 remix on Olinuxino a10s. The board boot well, and I can login from the serial port, but Xorg crashes with these outputs: at boot: http://pastebin.com/PEZf9eKq after boot if I login and try startx: http://pastebin.com/HateKEi8 the board/sdcard/hdmi cable works well as I can run the base debian distro from olimex with the same components. Also the various script.bin, uImage ecc should be ok as I checked that were the one's for sun5i. Can you help me with this problem?
Yes, there was an error in the fex / script.bin file for the Olinuxino a10s causing it to not send video to the hdmi output with Fedora 19 ARM remix for Allwinner SOCs release 1. This is fixed in release 2, but in release 2 I ended up picking a bad u-boot snapshot (and doing a bad QA job as well), so that one does not boot on sun5i devices at all. Attached is a good script.bin for the Olinuxino a10s, if you drop this in the u-boot partition of your sdcard the hdmi out should work. Regards, Hans
Attachment:
script.bin
Description: Binary data
_______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
