Hi All,
Back in February, support for checking bonding and vlan devices was
added to virt-manager, and released in version 0.5.4. I'm curious if
anyone has a working setup with this code?
Reason I ask is that I backported this code to rhel5.2 and it doesn't
seem to work, because of the following bit:
+ def _net_get_bonding_masters(self):
+ masters = []
+ f = open("/sys/class/net/bonding_masters")
+ while True:
+ rline = f.readline()
+ if not rline: break
+ if rline == "\x00": continue
+ rline = rline.strip("\n\t")
+ masters = rline[:-1].split(' ')
^^^
this piece
+ return masters
For some reason the last character is stripped off, which breaks all
the setups I've tested on. Clearly this must have worked for someone
at some time, so I would be curious to get some help from someone with
a working setup, since there must be some middle ground that can work
for both parties. I've tried contacting the original author but haven't
received a response.
This code is from:
http://hg.et.redhat.com/virt/applications/virt-manager--devel?cs=6a155cfe437c
Thanks,
Cole
_______________________________________________
et-mgmt-tools mailing list
et-mgmt-tools@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/et-mgmt-tools
