Re: cobbler-1.0.1-2 - build problem using koan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Yes. DHCP is needed, since your system hasn't been assigned an IP address and can only identify itself by MAC. The network portion of your kickstart file will ensure that a static IP will be assigned to eth0 only AFTER the kickstart file has been downloaded.

    * Set 'manage_dhcp=1' in /etc/cobbler/settings (or
      /var/lib/cobbler/settings if using an older version of cobbler).
    * In the dhcp template file (/etc/cobbler/dhcp.template) ensure
      that you have configured a stanza for the subnet corresponding
      to that of your provisioned system.
          o E.g.
                + ...
                + subnet 10.x.x.x netmask 255.255.254.0 {
                       option routers          10.x.x.253;
                       option subnet-mask      255.255.254.0;
                       filename                "/pxelinux.0";
                       next-server             $next_server;
                  }
                + ...
          o Just be sure there are no 'range dynamic-bootp',
            'default-lease-time', or 'max-lease-time' statements,
            since you are probably concerned about dynamic IP
            assignments in a prod environment.
    * When provisioning your system with cobbler, specify *both* a MAC
      address *and* an IP address, so that the host stanza in
      /etc/dhcpd.conf is unique and not dependent upon dynamic options.

Give it a whirl and reply with any updates. :)



OK thanks for the update i am a bit confused though as i thought that using koan i could _reinstall_ a system without the need for DHCP and PXE - The simple fact is that right now i cant use DHCP in this specific network and so using koan to rebuild, and thats the key i think i am rebuilding a current running OS not bare metal, to contact the cobbler server.

Koan contacts the cobbler server and i thought, and it seems correct, that it builds a minimal boot kernel, this boots with IP info and then the kickstart is downloaded negating the need for DHCP. I do similar things in another network to rebuild people's VM's running on laptops etc that are not covered in my DHCP setup and they rebuild fine, the only issue is that this is a new server and o cant seem to figure out whats wrong.

i'd like to know if i've had a misconception about koan all this time ;)

thanks

_______________________________________________
et-mgmt-tools mailing list
et-mgmt-tools@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/et-mgmt-tools

[Index of Archives]     [Fedora Users]     [Fedora Legacy List]     [Fedora Maintainers]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [KDE Users]     [Fedora Tools]

  Powered by Linux