Hi, the problem was a firewall rule.Silly me :) But thanks for mentioning the --autonet feature, it is very useful ! I was able to install RHEL4-xen with koan successfully. But at the moment I have a problem installing RHEL3 with koan. The CPU supports hardware virtualization, so shouldn' t I use koan -T xenfv ?? If I run this, then I get libvir: Xen Daemon error : POST operation failed: (xend.err "Error creating domain: (2, 'Invalid kernel', 'xc_dom_find_loader: no loader found\\n')") virDomainCreateLinux() failed POST operation failed: (xend.err "Error creating domain: (2, 'Invalid kernel', 'xc_dom_find_loader: no loader found\\n')") Kind Regards Tim -----Ursprüngliche Nachricht----- Von: et-mgmt-tools-bounces@xxxxxxxxxx [mailto:et-mgmt-tools-bounces@xxxxxxxxxx] Im Auftrag von Pablo Iranzo Gómez Gesendet: Montag, 21. April 2008 10:12 An: Fedora/Linux Management Tools Betreff: Re: koan-installation hangs Hi Try to start an VNC installation and check VT3 and 4 for information, also try to use the full network parameters on command line and not specify any "dhcp" option on kickstart. Not tested, but have a look at --autonet parameter for Koan. Regards Pablo El lun, 21-04-2008 a las 10:06 +0200, Tim.Einmahl@xxxxxx escribió: > Hi, > > I successfully installed cobbler and I can use it to install Redhat > Enterprise Linux > over PXE over a dedicated interface on the cobblerserver. > > But I would like to also install virtual machines with koan over the > public interface of the cobblerserver, where I am stuck at the moment. > > I can start the installation with koan, but the problem is, that the > domU that is being created is not able > to get an IP-Adress for the installation process over DHCP, because not > in every subnet there is a DHCP-Server.So the domU should have a static > ip-address for the installation process to be able to download the > kickstart-file. > > I tried to configure /var/lib/cobbler/settings with: > > kernel_options: > ksdevice: link > lang: ' ' > text: ~ > ip: 192.168.0.1 > netmask: 255.255.255.0 > network: static > device: eth0 > > The problem is, when the install-kernel boots, it hangs at > XENBUS: Device with no driver: device/vbd/51712 > XENBUS: Device with no driver: device/vif/0 > Freeing unused kernel memory: 168k freed > Write protecting the kernel read-only data: 360k > > Then nothing more happens and virt-manager only shows a blue screen. > > Do you have any idea what's going wrong ? > > Thanks in advance > Kind Regards > > Tim > > > > _______________________________________________ > et-mgmt-tools mailing list > et-mgmt-tools@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/et-mgmt-tools -- Pablo Iranzo Gómez (Pablo.Iranzo@xxxxxxxxxx) RHCE/Global Profesional Services Consultant Spain Phone: +34 645 01 01 49 (CET/CEST) GnuPG KeyID: 0xFAD3CF0D --- Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta 3ºD, 28016 Madrid, Spain Dirección Registrada: Red Hat S.L., C/ Velazquez 63, Madrid 28001, Spain Inscrita en el Reg. Mercantil de Madrid - C.I.F. B82657941 *********************************************************************************** Hinweis: Diese E-Mail und evtl. Anhaenge wurden automatisch auf Viren geprueft und gelten als virenfrei. Ihr IT-Referat. *********************************************************************************** _______________________________________________ et-mgmt-tools mailing list et-mgmt-tools@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/et-mgmt-tools
