On Tue, 2015-06-16 at 17:59 +0530, anant garg wrote: > > Thank you for replying. > > > I am sharing my understanding of the operation i performed. > > > I configured Network installation server 169.254.1.2 and > exported /export/home/agarg/imag from Server. > > > Now i make another machine(client ) attached to server to boot via > network. > Client System was able to boot via pxe and was able to download initrd > and install.img images. > I checked that it was able to recieve the main kickstart in stage1 of > anaconda installer. Where is the main kickstart downloaded from? > > > After the screen for running anaconda installer , i see below error > for installation failure:- > > > ------------------------------------------------------------------------------------------------------------------------------ > > > > The following problem occurred on line 0 of the kickstart file: > > > Unable to open input kickstart file: Could not open/read > file:///mnt/stage2/kickstart/Additional.inc > > > ------------------------------------------------------------------------------------------------------------------------------ > > > I accessed tty2 and check the contents of mnt/stage2/, I see below > contents were only present:- > > > $ ls mnt/stage2/ > efiboot.img efidisk.img install.img pxeboot TRANS.TBL > > > The above is contents of my images directory present in the ISO Can you please add the information on how you boot the installer and how your kickstarts look? Try running $ ls /mnt/source And see if that's the directory your additional ks file lives in or not. -- Vratislav Podzimek Anaconda Rider | Red Hat, Inc. | Brno - Czech Republic _______________________________________________ Anaconda-devel-list mailing list Anaconda-devel-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/anaconda-devel-list