Re: Crash with Antelop Orion 32 USB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 


Maybe the problem of bandwidht is the same as the one describe in


with the comment of Alan Stern of 11/10

 sudo cat /sys/kernel/debug/usb/devices

T:  Bus=04 Lev=02 Prnt=02 Port=06 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=23e5 ProdID=a090 Rev= 1.00
S:  Manufacturer=Antelope Audio
S:  Product=Orion TB
S:  SerialNumber=1604515010211
C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=01(audio) Sub=00 Prot=20
I:* If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio
I:* If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
I:  If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
E:  Ad=05(O) Atr=05(Isoc) MxPS=2592 Ivl=125us
I:* If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
I:  If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
E:  Ad=84(I) Atr=25(Isoc) MxPS=2592 Ivl=125us
I:* If#= 3 Alt= 0 #EPs= 2 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=82(I) Atr=03(Int.) MxPS= 320 Ivl=4ms
E:  Ad=01(O) Atr=03(Int.) MxPS= 320 Ivl=4ms

So it is maybe required unbind the HID interfaces?

But i am no at all an expert in USB

Julien


Le Vendredi 4 mars 2016 14h14, julien de ROSNY <m8hpw@xxxxxxxx> a écrit :


Ok now on USB 2, the Antelop Orion 32 Channels.
I succeed in playing back and recording some sounds but it is very unstable (sometimes it works, sometime not).

So to check I use latency.c test alsa tool.

sudo ./a.out -P hw:2,0 -C hw:2,0 -m 512 -M 512 -p -s 10 -f  S24_3LE -c 32 -r 44100

It return

Scheduler set to Round Robin with priority 99...
Playback device is hw:2,0
Capture device is hw:2,0
Parameters are 44100Hz, S24_3LE, 32 channels, non-blocking mode
Poll mode: yes
Loop limit is 441000 frames, minimum latency = 512, maximum latency = 512
Hardware PCM card 2 'Orion TB' device 0 subdevice 0
Its setup is:
  stream       : PLAYBACK
  access       : RW_INTERLEAVED
  format       : S24_3LE
  subformat    : STD
  channels     : 32
  rate         : 44100
  exact rate   : 44100 (44100/1)
  msbits       : 24
  buffer_size  : 512
  period_size  : 256
  period_time  : 5804
  tstamp_mode  : NONE
  tstamp_type  : MONOTONIC
  period_step  : 1
  avail_min    : 256
  period_event : 0
  start_threshold  : 2147483647
  stop_threshold   : 512
  silence_threshold: 0
  silence_size : 0
  boundary     : 4611686018427387904
  appl_ptr     : 0
  hw_ptr       : 0
Hardware PCM card 2 'Orion TB' device 0 subdevice 0
Its setup is:
  stream       : CAPTURE
  access       : RW_INTERLEAVED
  format       : S24_3LE
  subformat    : STD
  channels     : 32
  rate         : 44100
  exact rate   : 44100 (44100/1)
  msbits       : 24
  buffer_size  : 512
  period_size  : 256
  period_time  : 5804
  tstamp_mode  : NONE
  tstamp_type  : MONOTONIC
  period_step  : 1
  avail_min    : 256
  period_event : 0
  start_threshold  : 2147483647
  stop_threshold   : 512
  silence_threshold: 0
  silence_size : 0
  boundary     : 4611686018427387904
  appl_ptr     : 0
  hw_ptr       : 0
Trying latency 512 frames, 11609.977us, 11.609977ms (86.1328Hz)
Go error: Broken pipe

the system error log gives

[185958.425936] usb 4-1.7: cannot submit urb 0, error -28: not enough bandwidth

and I monitor the usb port with sudo cat  /sys/kernel/debug/usb/usbmon/4u

that gives

ffff880108e67140 981603361 S Co:4:019:0 s 01 0b 0001 0001 0000 0
ffff880108e67140 981603558 C Co:4:019:0 0 0
ffff880108e672c0 981603707 S Ci:4:019:0 s a1 01 0100 0100 0004 4 <
ffff880108e672c0 981603927 C Ci:4:019:0 0 4 = 44ac0000
ffff88040bd37c00 981603983 S Zo:4:019:5 -115:1:0 26 -18:0:480 -18:480:576 -18:1056:480 -18:1536:576 -18:2112:480 13728 = 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ffff88040bd35400 981603997 S Zo:4:019:5 -115:1:0 26 -18:0:480 -18:480:576 -18:1056:480 -18:1536:576 -18:2112:480 13728 = 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ffff88040bd36400 981604004 S Zo:4:019:5 -115:1:0 26 -18:0:576 -18:576:480 -18:1056:576 -18:1632:480 -18:2112:576 13728 = 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ffff88040bd31400 981604011 S Zo:4:019:5 -115:1:0 26 -18:0:576 -18:576:480 -18:1056:576 -18:1632:576 -18:2208:480 13824 = 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ffff880108e672c0 981604057 S Co:4:019:0 s 01 0b 0001 0002 0000 0
ffff880108e672c0 981604126 C Co:4:019:0 0 0
ffff880108e66480 981604178 S Ci:4:019:0 s a1 01 0100 0100 0004 4 <
ffff880108e66480 981604301 C Ci:4:019:0 0 4 = 44ac0000
ffff880108e66480 981604371 S Ci:4:019:0 s a1 01 0100 0100 0004 4 <
ffff880108e66480 981604547 C Ci:4:019:0 0 4 = 44ac0000
ffff8800d3010c00 981604830 S Zi:4:019:4 -115:1:0 8 -18:0:757 -18:757:757 -18:1514:757 -18:2271:757 -18:3028:757 6056 <
ffff8800d3010c00 981604940 E Zi:4:019:4 -28 0
ffff880108e660c0 981605361 S Co:4:019:0 s 01 0b 0000 0002 0000 0
ffff880108e660c0 981605545 C Co:4:019:0 0 0
ffff88040bd37c00 981607674 C Zo:4:019:5 -104:1:7936:0 26 0:0:480 0:480:576 0:1056:480 0:1536:576 0:2112:480 13728 >
ffff88040bd35400 981610919 C Zo:4:019:5 -104:1:7962:0 26 0:0:480 0:480:576 0:1056:480 0:1536:576 0:2112:480 13728 >
ffff88040bd36400 981614169 C Zo:4:019:5 -104:1:7988:0 26 0:0:576 0:576:480 0:1056:576 0:1632:480 0:2112:576 13728 >
ffff88040bd31400 981617428 C Zo:4:019:5 -104:1:8014:0 26 0:0:576 0:576:480 0:1056:576 0:1632:576 0:2208:480 13824 >
ffff880108e672c0 981620356 S Co:4:019:0 s 01 0b 0000 0001 0000 0
ffff880108e672c0 981620573 C Co:4:019:0 0 0

So I think that usb sound driver asks for a too high bandwidth that is not compatible with USB2 protocol. But because it works on windows on USB2, it should not be the case.

How can I know that the value of bandwidth that is asked?

Thanks,

M8hpw


Le Mercredi 2 mars 2016 17h42, julien de ROSNY <m8hpw@xxxxxxxx> a écrit :


Clement you are right, I try on a usb 2 port instead of a usb 3 one, an this error is removed.
But the usb 32 channel sound card is not really recognized.

But now I have a new error :
usb 4.1.1: cannot submit urb0 : error -28 : not enought bandwidth.

But the device works under Windows 7 with the same USB 2.0 port.

Regards.

Julien



Le Mardi 1 mars 2016 13h59, Clemens Ladisch <cladisch@xxxxxxxxxxxxxx> a écrit :


julien de ROSNY wrote:
> [ 1201.257672] INFO: task pulseaudio:1992 blocked for more than 120 seconds.
> [ 1201.257727] Call Trace:
> [ 1201.257746]  [<ffffffff817c9059>] schedule+0x29/0x70
> [ 1201.257758]  [<ffffffff815c0955>] usb_kill_urb+0x65/0xa0
> [ 1201.257777]  [<ffffffff815bf568>] usb_hcd_flush_endpoint+0x1b8/0x220
> [ 1201.257794]  [<ffffffff815c27fb>] usb_disable_endpoint+0x5b/0xd0
> [ 1201.257800]  [<ffffffff815c28b9>] usb_disable_interface+0x49/0x60
> [ 1201.257806]  [<ffffffff815c2e07>] usb_set_interface+0x1b7/0x3b0

This looks like a bug in the host controller driver.
Can you change to a different port (USB2/USB3)?


Regards,
Clemens


------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user



------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140

_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user



------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140

_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user


------------------------------------------------------------------------------

_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
[Index of Archives]     [ALSA Devel]     [Linux Audio Users]     [Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]

  Powered by Linux