On 24/08/12 21:04, Dominique Michel wrote: > Le Fri, 24 Aug 2012 14:12:36 +0300, > alexander <axeldenstore@xxxxxxxxx> a écrit : > >> On 24/08/12 01:10, alexander wrote: >>> I figured the internal chip on my mobo is indeed fried.. with the >>> new card I only get sound out of the right channel.. if I gain the >>> left channel in alsamixer I can still here the noise floor rising >>> so it shouldn't be another fauly chip. I've tried to remove >>> my .asoundrc and /var/lib/alsa/asound without luck. When I start it >>> with jack it's the same thing, and I can also only see 2 outputs >>> even tho it's a 7.1 channel device. But that's not all catastrophic >>> as I only use 2 channels anyway.. but it probably have something to >>> do with the main issue. >>> >>> It's a cheapo 7.1 pci card from logilink with some VIA chip. >>> >>> 01:07.0 Multimedia audio controller: VIA Technologies Inc. >>> VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01) >>> Subsystem: VIA Technologies Inc. Device 2403 >>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- >>> ParErr- Stepping- SERR- FastB2B- DisINTx- >>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >>>> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- >>> Latency: 64 >>> Interrupt: pin A routed to IRQ 17 >>> Region 0: I/O ports at dc00 [size=32] >>> Region 1: I/O ports at d880 [size=128] >>> Capabilities: <access denied> >>> Kernel driver in use: snd_ice1724 >>> >>> [alex@burken ~]$ cat /proc/asound/pcm >>> 01-00: ICE1724 : ICE1724 : playback 1 : capture 1 >>> 01-01: ICE1724 IEC958 : ICE1724 IEC958 : playback 1 : capture 1 >>> >>> >> additinal research --> >> >> When I reload the driver dmesg tells me; >> [ 3447.192091] ice1724: No matching model found for ID 0x12140324 >> [ 3447.194954] ice1724: Invalid EEPROM version 1 > If you read ALSA_Configuration.txt into the kernel sources > Documentation folder or into the alsa-driver documentation (depending > on how the alsa driver is installed on your system), you will find a > list of kernel parameters you can add in the alsa configuration file > (something like /etc/modprobe.d/alsa.conf or sound.conf). > > From this file: > model - Use the given board model, one of the following: > revo51, revo71, amp2000, prodigy71, prodigy71lt, > prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192, > juli, aureon51, aureon71, universe, ap192, k8x800, > phase22, phase28, ms300, av710, se200pci, se90pci, > fortissimo4, sn25p, WT192M, maya44 > > This module supports multiple cards and autoprobe. > > Note: The supported board is detected by reading EEPROM or PCI > SSID (if EEPROM isn't available). You can override the > model by passing "model" module option in case that the > driver isn't configured properly or you want to try another > type for testing. > > This file list the supported board. It is no Logitech one. But if you > are lucky, one of the above will work. > > > # modinfo -p snd-ice1724 > index:Index value for ICE1724 soundcard. (array of int) > id:ID string for ICE1724 soundcard. (array of charp) > enable:Enable ICE1724 soundcard. (array of bool) > model:Use the given board model. (array of charp) > > You can try to force a model in case the autodetection is failing. > Ex.: > options snd-ice1724 model=ap192 > > Dominique Thanks for the encouragement, I actually tried just that earlier today but I didn't have the patiance to go through all of them, now I did, the av710 seems to work, oddly enough there's no sound from the left front channel o_O But the rest seems to work. My next question then would be how I get Alsa to mix down and connect to the rear speaker channel automaticly? ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
