----- Original Message -----
> 'Twas brillig, and Nasa at 07/08/11 21:26 did gyre and gimble:
> > Hi,
> >
> > I was hoping I could get some help troubleshooting some audio
> > quality issues I am running into.
> > Specifically, I am getting a lot of *pops/crackles* when I play
> > audio files. It shows up when I
> > move from 2-channel to 4/5 channel audio (via pauvcontrol) - I am
> > using a USB X-FI sound-card with
> > the Meego IVI.
> >
> > I have tried changing the resample method (going from ffmpeg to
> > high-quality) and setting tsched=0,
> > neither making any noticeable difference.
> >
> > The only things I saw in /var/log/messages that seemed relevant was:
> > messages:Aug 6 16:59:26 localhost pulseaudio[570]: alsa-sink.c: ALSA
> > woke us up to write new data to the device, but there was actually
> > nothing to write!
> > messages:Aug 6 16:59:26 localhost pulseaudio[570]: alsa-sink.c: Most
> > likely this is a bug in the ALSA driver 'snd_usb_audio'. Please
> > report this issue to the ALSA developers.
> > messages:Aug 6 16:59:26 localhost pulseaudio[570]: alsa-sink.c: We
> > were woken up with POLLOUT set -- however a subsequent
> > snd_pcm_avail() returned 0 or another value < min_avail.
> >
> > And this was spout out of dmesg
> > [ 21.857184] ALSA sound/usb/mixer.c:2110: status interrupt: c0 00
> > [ 21.897058] ALSA sound/usb/mixer.c:2110: status interrupt: c0 00
> > [ 21.961062] ALSA sound/usb/mixer.c:2110: status interrupt: c0 00
> >
> > I have already eliminated the speakers and the amp (played music
> > from a different source and
> > they sounded fine).
> >
> > Let me know what else I should post (I could record the sound, if
> > that would be useful).
> >
> > Thanks in advance,
>
> While this could be an issue in the alsa driver itself, can I ask if
> you're applying any volume changes to your streams or sink?
>
> There could be a problem with optimized paths for software volume
> adjustments. You can disable these optimisations via a special
> environment var: PULSE_NO_SIMD=1
Col,
So I added
export PULSE_NO_SIMD=1
into my .bashrc file and rebooted. From the terminal
"echo $PULSE_NO_SIMD" came back '1' -- however, that didn't
make any difference in the pops/crackles I am hearing :{
Nasa
>
> It's worth checking this to see if it's that area that's at fault.
>
> Col
>
>
> --
>
> Colin Guthrie
> gmane(at)colin.guthr.ie
> http://colin.guthr.ie/
>
> Day Job:
> Tribalogic Limited [http://www.tribalogic.net/]
> Open Source:
> Mageia Contributor [http://www.mageia.org/]
> PulseAudio Hacker [http://www.pulseaudio.org/]
> Trac Hacker [http://trac.edgewall.org/]
>
> _______________________________________________
> pulseaudio-discuss mailing list
> pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
------------------------------------------------------------------------------
uberSVN's rich system and user administration capabilities and model
configuration take the hassle out of deploying and managing Subversion and
the tools developers use with it. Learn more about uberSVN and get a free
download at: http://p.sf.net/sfu/wandisco-dev2dev
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
