Preston C. ha scritto:
On Thu, Mar 4, 2010 at 8:50 PM, V Gabriele De Palo <vgdepalo@xxxxxxxx> wrote:
Hello everyone,
the Fast Track Ultra works with GNU / Linux
Thanks to Mr. Clemens to Mr. Felix and to Mr. Salvo!
It is not necessary to compile the kernel,
Just apply the patch before compiling alsa-driver with this command
# cd / usr/src/alsa/alsa-driver-1.0.22.1/sound # patch-p1
<ftultra-patch.diff,
so just to continue with 'typical installation of alsa-driver, alsa-lib
and alsa-utils.
Now I wait to verify the stability and the full functionality and DSP.
Thanks again so much to Mr. Clemens, Mr. Felix, Mr. Salvo and everyone.
Ciao
gabriele
diff --git a/usb/usbaudio.c b/usb/usbaudio.c
index c6b9c8c..ac46292 100644
--- a/usb/usbaudio.c
+++ b/usb/usbaudio.c
@@ -2263,6 +2263,10 @@ static void init_substream(struct snd_usb_stream
*as, int stream, struct audiofo
case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */
subs->ops.retire_sync = retire_playback_sync_urb_hs_emu;
break;
+ case USB_ID(0x0763, 0x2080): /* M-Audio Fast Track Ultra */
+ subs->ops.prepare_sync = prepare_playback_sync_urb;
+ subs->ops.retire_sync = retire_playback_sync_urb;
+ break;
}
}
snd_pcm_set_ops(as->pcm, stream,
@@ -2814,6 +2818,7 @@ static int parse_audio_endpoints(struct
snd_usb_audio *chip, int iface_no)
break;
case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */
case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
+ case USB_ID(0x0763, 0x2080): /* M-Audio Fast Track Ultra */
/* doesn't set the sample rate attribute, but supports it */
fp->attributes |= EP_CS_ATTR_SAMPLE_RATE;
break;
diff --git a/usb/usbquirks.h b/usb/usbquirks.h
index e691eba..e8a0197 100644
--- a/usb/usbquirks.h
+++ b/usb/usbquirks.h
@@ -1856,6 +1856,33 @@ YAMAHA_DEVICE(0x7010, "UB99"),
}
}
},
+{
+ USB_DEVICE_VENDOR_SPEC(0x0763, 0x2080),
+ .driver_info = (unsigned long) & (const struct
snd_usb_audio_quirk) {
+ /* .vendor_name = "M-Audio", */
+ /* .product_name = "Fast Track Ultra", */
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = & (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ /* interface 3 (MIDI) is standard compliant */
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
/* Casio devices */
{
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
Hi, I use Arch Linux. I am trying to figure out how to install this
patch. Do I need to copy the code to a file before I try to install
it? Or do I just:
# cd / usr/src/alsa/alsa-driver-1.0.22.1/sound
# patch-p1 <ftultra-patch.diff
Thanks,
Preston
Ciao,
I'm still checking FTU's correct and full operation in linux.
but continues to lack mixers support,
does not work at 44.1K
and no DSP.
but, for now, it works very well with ardour! 8-)
The patch, which I modified for the FTU, was written by Mr Clemens and
Mr Felix to recompile the kernel, I suppose.
but I've always had problems with the kernel recompiling process,
I don't know WTF!
So I tried to apply the patch when I install the ALSA drivers.
so for convenience and comfort
Save the patch, see the mail's attached file, as ftultra-patch.diff
Download alsa-driver-xxx, alsa-lib-xxx, and alsa-utils-xxx
move the patch in: alsa-driver-xxx/sound/
Create a folder alsa where you move downloaded alsa files and
Move this folder into /usr/src/
at this point, before you install as usual alsa-driver, lib, and utils
you move in /usr/src/alsa/alsa-driver-xxx/sound:
cd /usr/src/alsa/alsa-driver-xxx/sound
and, as root user, apply the patch with the command
patch-p1 <ftultra-patch.diff
Wait the command's output that you confirm the success of the patch-ing
and then proceed as usual to install alsa-driver, lib and utils
using
. / configure, make, sudo make install ...
ahh, I forgot:
sorry for my English! :-)
HYH
fammi sapere se tutto ok,
almeno proveremo insieme la FTU!
ciao
gabriele
diff --git a/usb/usbaudio.c b/usb/usbaudio.c
index c6b9c8c..ac46292 100644
--- a/usb/usbaudio.c
+++ b/usb/usbaudio.c
@@ -2263,6 +2263,10 @@ static void init_substream(struct snd_usb_stream *as, int stream, struct audiofo
case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */
subs->ops.retire_sync = retire_playback_sync_urb_hs_emu;
break;
+ case USB_ID(0x0763, 0x2080): /* M-Audio Fast Track Ultra */
+ subs->ops.prepare_sync = prepare_playback_sync_urb;
+ subs->ops.retire_sync = retire_playback_sync_urb;
+ break;
}
}
snd_pcm_set_ops(as->pcm, stream,
@@ -2814,6 +2818,7 @@ static int parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
break;
case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */
case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
+ case USB_ID(0x0763, 0x2080): /* M-Audio Fast Track Ultra */
/* doesn't set the sample rate attribute, but supports it */
fp->attributes |= EP_CS_ATTR_SAMPLE_RATE;
break;
diff --git a/usb/usbquirks.h b/usb/usbquirks.h
index e691eba..e8a0197 100644
--- a/usb/usbquirks.h
+++ b/usb/usbquirks.h
@@ -1856,6 +1856,33 @@ YAMAHA_DEVICE(0x7010, "UB99"),
}
}
},
+{
+ USB_DEVICE_VENDOR_SPEC(0x0763, 0x2080),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ /* .vendor_name = "M-Audio", */
+ /* .product_name = "Fast Track Ultra", */
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = & (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ /* interface 3 (MIDI) is standard compliant */
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
/* Casio devices */
{
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
