Hello,
I have a Creative X-Fi Xtreme Audio in PCI-E and I'm trying to make it
work with the snd-hda-intel module compiled from my kernel
(2.6.31-gentoo-r2).
I made tests with mplayer and whenever I want to play a sound, the sound
just don't come out. Mplayer stays at 0:00 until I quit it (no need to
kill it).
I had a look at dmesg. Every time I try to play something I get messages
like these :
[ 167.997029] hda_codec: rates == 0 (nid=0x12, val=0x0, ovrd=0)
[ 173.053323] __ratelimit: 1 callbacks suppressed
[ 174.124799] hda_codec: rates == 0 (nid=0x12, val=0x0, ovrd=0)
[ 287.496606] hda_codec: rates == 0 (nid=0x12, val=0x0, ovrd=0)
[ 287.496934] __ratelimit: 20 callbacks suppressed
When I modprobe snd-hda-intel I get :
[ 111.287946] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 111.287968] HDA Intel 0000:03:00.0: PCI INT A -> Link[APC2] -> GSI 17
(level, low) -> IRQ 17
[ 111.567237] hda-intel: spurious response 0x0:0x0, last cmd=0x000000
[ 112.575093] hda-intel: azx_get_response timeout, switching to polling
mode: last cmd=0x107f0d00
[ 113.583158] hda_intel: azx_get_response timeout, switching to
single_cmd mode: last cmd=0x107f0d00
Here's lspci -vvnn :
02:00.0 PCI bridge [0604]: Creative Labs Device [1102:7006] (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: fdf00000-fdffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Count=1/16 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [80] Subsystem: Creative Labs Device [1102:0010]
Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us,
L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
MaxPayload 512 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <1us, L1 <16us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
03:00.0 Audio device [0403]: Creative Labs [SB X-Fi Xtreme Audio]
CA0110-IBG [1102:0009]
Subsystem: Creative Labs Device [1102:0018]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fdffc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [dc] Power Management version 3
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
Here's /proc/asound/cards :
1 [Generic ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xfdffc000 irq 17
And here's /proc/asound/card1/codec#1 :
Codec: Creative CA0110-IBG
Address: 1
Function Id: 0x1
Vendor Id: 0x1102000a
Subsystem Id: 0x11021006
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
N/A
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=255, o=255, i=255, unsolicited=1, wake=1
Any help would be greatly appreciated.
Philippe
------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Alsa-user mailing list
Alsa-user@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-user
