On Fri, 26 Jun 2009 10:48:29 -0700 scar <scar@xxxxxxxxxx> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > Clemens Ladisch @ 06/26/2009 03:30 AM: > > scar wrote: > >> i have been experimenting, and what appears to be happening is this: > >> while recording using the line, if the microphone levels are adjusted, > >> the driver/card automatically jumps to recording from the mic. > > > > Neither the driver nor the card do this; I'd guess this is a feature of > > your mixer application. > > > >> still remaining is the issue of not being able to adjust the left and > >> right line volumes. it would be nice to have that extra functionality. > > > > The hardware does not have any mechanism to change the line input's > > level. You have to adjust the volume after recording. > > > shown in section 6.3.2 of the xonar dx manual is a picture of the levels > for recording, indicating there is an adjustment for line-in. > > The mixer control you see does not necessarily prove there is the corresponding HW control. I had a similar situation with my MAudio Revolution 7.1. In the end ALSA developers implemented SW (capture) volume - because the card doesn't have HW gain control. I also pointed them to the picture of Windows mixer in the manual. Regards, Sergei. ------------------------------------------------------------------------------ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
