Thanks Yan I did actually read this in my research. The documentation was a little too brief for me to extrapolate out for my needs. It may actually fix another problem I have with the default card but not this issue, which is to setup all MIDI devices in a specific order to make life easy. I need all MIDI devices in my setup and I can't intuitively see how this will set the order in which the MIDI ports appear in ALSA (and hence jack midi as a flow on). I will try and work it out.. but I just can't see it from this yet. cheers Allan On Thu Jan 22 12:37 , Yan Seiner sent: >sonofzev@xxxxxxxxxxxx wrote: >> >> Hi All >> >> Firstly thanks to all the people who responded last time. >> I have tried the simpler methods (modprobe.conf) without success as 2 of my devices have the same vendor ID and product ID even though they are different models. (emagic AMT8 and emagic Unitor 8 mk II). >> >> So it looks like I have to use the udev method. Unfortunately I am having a hard time following the documentation, especially with assigning the order by bus location rather than VID and PID... I'm fairly technical, but I'm just not getting the doco in this case.. so please don't RTFM me.. >> >> Does anyone have an example of their UDEV rules for 2 identical devices or one that uses bus location rather than VID and PID they could send me? >> >Sorry but RTFM this one.... > >http://wiki.c3sl.ufpr.br/multiseat/index.php/How_to_make_the_sound_work > >It should help you out. While it's written for mdm, you can work it out >and you don't need udev at all. Just use it to set ALSA_CARD to >whatever card you want to use. > >--Yan > >) ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
