Hello, I am trying to make flite work on my HP Ipaq H2210 which is running Angstrom Linux. It may be an Alsa issue, I don't know. I posted this about two weeks ago but got no response. Should I try another alsa list? The short version of my troubles is at http://wiki.navit-project.org/index.php/Navit_on_%C3%85ngstr%C3%B6m#Alsa_and_flite . Basically it is this: root@h2200:~$ cat /proc/asound/cards 0 [h2200 Audio ]: h2200 Audio - h2200 Audio iPAQ h2200 Audio [codec Philips UDA1380] root@h2200:~$ aplay notify.wav Playing WAVE 'notify.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, Stereo So it works fine, but not for mono. root@h2200:~$ cat /etc/asound.conf|grep -v ^# pcm.dsp0 { type plug slave.pcm "dmix" } ctl.mixer0 { type hw card 0 } pcm.10to20 { type route slave.pcm hw:0 slave.channels 2 ttable.0.0 1 ttable.0.1 1 } That's the current config. Then I start flite: root@h2200:~$ flite -t Test ALSA lib pcm_plug.c:773:(snd_pcm_plug_hw_refine_schange) Unable to find an usable access for '(null)' audio_open_alsa: failed to set number of channels to 1. Invalid argument. When I use the 10to20 mono to stereo mapping I get: root@h2200:~$ aplay -D10to20 notify.wav Playing WAVE 'notify.wav' : Signed 16 bit Little Endian, Rate 22050 Hz, Stereo aplay: set_params:879: Broken configuration for this PCM: no configurations available With flite I get a similar error when I want to make stereo from the 1 channel that flite wants. What's happening on the ipaq? How can I solve this? Obviously I want flite to work. Tips are very welcome! Kind regards, Udo ------------------------------------------------------------------------------ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
