Hi all,
I changed my motherboard, from Asus A8V-Deluxe to A8V.
I've never had sound problems with Deluxe onboard soundcard using snd-via82xx module (Debian Testing, kernel 2.6.26).
But after MB switching I experimented some problems:
1. IRQ conflict;
2. the sound card plays continuously repeated sounds (did it get stammering?).
I'm not as expert to understand if the two problems are related each other.
I attached my dmesg output after booting (file dmesg.txt) and the dmesg output after running "alsaconf" (file alsaconf.txt).
I tried:
- booting with the "irqpoll" option as suggested by the dmesg outupt;
- booting with the "acpi=off" option as suggested somewhere on the web.
The problems is still there.
Is there something I can do to make my soundcard work again? (are the two MB so different to have different soundcards?).
Please, help me, I really don't know what to do!!!
TIA!
marco
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-4) (waldi@xxxxxxxxxx) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 12:00:54 UTC 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005ffb0000 (usable) [ 0.000000] BIOS-e820: 000000005ffb0000 - 000000005ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000005ffc0000 - 000000005fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] 639MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00ff780] 000ff780 [ 0.000000] Entering add_active_range(0, 0, 393136) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 393136 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 393136 [ 0.000000] On node 0 totalpages: 393136 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1280 pages used for memmap [ 0.000000] HighMem zone: 162480 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FA810, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 5FFB0000, 0030 (r1 A M I OEMRSDT 5000729 MSFT 97) [ 0.000000] ACPI: FACP 5FFB0200, 0081 (r1 A M I OEMFACP 5000729 MSFT 97) [ 0.000000] ACPI: DSDT 5FFB03F0, 391B (r1 A0277 A0277001 1 MSFT 100000D) [ 0.000000] ACPI: FACS 5FFC0000, 0040 [ 0.000000] ACPI: APIC 5FFB0390, 0052 (r1 A M I OEMAPIC 5000729 MSFT 97) [ 0.000000] ACPI: OEMB 5FFC0040, 003F (r1 A M I OEMBIOS 5000729 MSFT 97) [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:9f780000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390064 [ 0.000000] Kernel command line: root=/dev/hdc3 ro vga=791 splash=silent [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2202.873 MHz processor. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 1548504k/1572544k available (1767k kernel code, 22688k reserved, 749k data, 244k init, 655040k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc037d000 - 0xc03ba000 ( 244 kB) [ 0.004000] .data : 0xc02b9f63 - 0xc0375620 ( 749 kB) [ 0.004000] .text : 0xc0100000 - 0xc02b9f63 (1767 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084009] Calibrating delay using timer specific routine.. 4411.26 BogoMIPS (lpj=8822539) [ 0.084055] Security Framework initialized [ 0.084067] SELinux: Disabled at boot. [ 0.084075] Capability LSM initialized [ 0.084093] Mount-cache hash table entries: 512 [ 0.084265] Initializing cgroup subsys ns [ 0.084273] Initializing cgroup subsys cpuacct [ 0.084279] Initializing cgroup subsys devices [ 0.084305] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084313] CPU: L2 Cache: 512K (64 bytes/line) [ 0.084320] CPU 0(2) -> Core 0 [ 0.084326] Intel machine check architecture supported. [ 0.084333] Intel machine check reporting enabled on CPU#0. [ 0.084352] Checking 'hlt' instruction... OK. [ 0.101096] ACPI: Core revision 20080321 [ 0.107783] ENABLING IO-APIC IRQs [ 0.108006] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.147875] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 [ 0.148009] Booting processor 1/1 ip 6000 [ 0.156009] Initializing CPU#1 [ 0.156009] Calibrating delay using timer specific routine.. 4405.89 BogoMIPS (lpj=8811785) [ 0.156009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.156009] CPU: L2 Cache: 512K (64 bytes/line) [ 0.156009] CPU 1(2) -> Core 1 [ 0.156009] Intel machine check architecture supported. [ 0.156009] Intel machine check reporting enabled on CPU#1. [ 0.235881] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 [ 0.235944] Brought up 2 CPUs [ 0.235949] Total of 2 processors activated (8817.16 BogoMIPS). [ 0.236003] CPU0 attaching sched-domain: [ 0.236006] domain 0: span 0-1 [ 0.236008] groups: 0 1 [ 0.236012] CPU1 attaching sched-domain: [ 0.236013] domain 0: span 0-1 [ 0.236014] groups: 1 0 [ 0.236014] net_namespace: 660 bytes [ 0.236014] Booting paravirtualized kernel on bare hardware [ 0.236014] NET: Registered protocol family 16 [ 0.236014] ACPI: bus type pci registered [ 0.236014] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 [ 0.236014] PCI: Using configuration type 1 for base access [ 0.236014] Setting up standard PCI resources [ 0.244015] ACPI: EC: Look up EC in DSDT [ 0.248120] ACPI: Interpreter enabled [ 0.248120] ACPI: (supports S0 S1 S3 S4 S5) [ 0.248120] ACPI: Using IOAPIC for interrupt routing [ 0.256120] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.256120] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices [ 0.256120] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.264121] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 0.264227] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) [ 0.264325] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 14 15) [ 0.266161] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *7 10 11 14 15) [ 0.266260] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 14 15) [ 0.266358] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.266458] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.266560] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 0.267217] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - BD, should be B0 [20080321] [ 0.267234] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.267523] pnp: PnP ACPI init [ 0.267532] ACPI: bus type pnp registered [ 0.271016] pnp: PnP ACPI: found 14 devices [ 0.271024] ACPI: ACPI bus type pnp unregistered [ 0.271031] PnPBIOS: Disabled by ACPI PNP [ 0.273832] PCI: Using ACPI for IRQ routing [ 0.280696] ACPI: RTC can wake from S4 [ 0.284641] system 00:09: ioport range 0x680-0x6ff has been reserved [ 0.284649] system 00:09: ioport range 0x290-0x297 has been reserved [ 0.284660] system 00:0a: ioport range 0x3e1-0x3e7 has been reserved [ 0.284668] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.284676] system 00:0a: ioport range 0x800-0x87f has been reserved [ 0.284684] system 00:0a: ioport range 0x400-0x41f has been reserved [ 0.284696] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.284705] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.284714] system 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved [ 0.284727] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.284735] system 00:0d: iomem range 0xc0000-0xdffff could not be reserved [ 0.284743] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.284752] system 00:0d: iomem range 0x100000-0x5ffeffff could not be reserved [ 0.314919] PCI: Bridge: 0000:00:01.0 [ 0.314919] IO window: disabled. [ 0.314919] MEM window: 0xfaf00000-0xfbffffff [ 0.314919] PREFETCH window: 0x00000000f0000000-0x00000000f9ffffff [ 0.314919] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.314919] NET: Registered protocol family 2 [ 0.316194] Switched to high resolution mode on CPU 0 [ 0.318922] Switched to high resolution mode on CPU 1 [ 0.328222] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.328642] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.331619] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.332282] TCP: Hash tables configured (established 131072 bind 65536) [ 0.332292] TCP reno registered [ 0.338001] NET: Registered protocol family 1 [ 0.338142] checking if image is initramfs... it is [ 0.779322] Freeing initrd memory: 6255k freed [ 0.781714] audit: initializing netlink socket (disabled) [ 0.781714] type=2000 audit(1228861416.772:1): initialized [ 0.781714] highmem bounce pool size: 64 pages [ 0.781714] Total HugeTLB memory allocated, 0 [ 0.781716] VFS: Disk quotas dquot_6.5.1 [ 0.781716] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.781716] msgmni has been set to 1759 [ 0.781716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.781716] io scheduler noop registered [ 0.781716] io scheduler anticipatory registered [ 0.781716] io scheduler deadline registered [ 0.781716] io scheduler cfq registered (default) [ 0.781716] PCI: VIA PCI bridge detected.Disabling DAC. [ 0.781716] pci 0000:01:00.0: Boot video device [ 0.781716] vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 3072k, total 131072k [ 0.781724] vesafb: mode is 1024x768x16, linelength=2048, pages=1 [ 0.781732] vesafb: protected mode interface info at c000:f0c0 [ 0.781739] vesafb: pmi: set display start = c00cf0f6, set palette = c00cf160 [ 0.781747] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 0.781771] vesafb: scrolling: redraw [ 0.781776] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.821580] Console: switching to colour frame buffer device 128x48 [ 0.857716] fb0: VESA VGA frame buffer device [ 0.858131] isapnp: Scanning for PnP cards... [ 1.167650] isapnp: No Plug & Play device found [ 1.171650] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.171650] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.172077] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.175662] brd: module loaded [ 1.175662] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.175662] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.176000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.176000] mice: PS/2 mouse device common for all mice [ 1.176000] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.176077] rtc0: alarms up to one year, y3k [ 1.179184] cpuidle: using governor ladder [ 1.179461] cpuidle: using governor menu [ 1.179728] No iBFT detected. [ 1.180045] TCP cubic registered [ 1.180045] NET: Registered protocol family 17 [ 1.180045] Using IPI No-Shortcut mode [ 1.180046] registered taskstats version 1 [ 1.180524] rtc_cmos 00:02: setting system clock to 2008-12-09 22:23:37 UTC (1228861417) [ 1.180695] Freeing unused kernel memory: 244k freed [ 1.197068] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.337693] ACPI: ACPI0007:00 is registered as cooling_device0 [ 1.354312] ACPI: ACPI0007:01 is registered as cooling_device1 [ 1.733707] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 1.748322] PCI: Disallowing DAC for device 0000:00:0a.0 [ 1.762889] skge 1.13 addr 0xfaa00000 irq 17 chip Yukon-Lite rev 9 [ 1.777860] skge eth0: addr 00:13:d4:bd:4c:47 [ 1.792269] SCSI subsystem initialized [ 1.818737] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 1.835870] ahc_pci:0:12:0: Host Adapter Bios disabled. Using default SCSI device parameters [ 1.874647] usbcore: registered new interface driver usbfs [ 1.889858] usbcore: registered new interface driver hub [ 1.911465] usbcore: registered new device driver usb [ 1.929496] USB Universal Host Controller Interface driver v3.0 [ 1.946312] No dock devices found. [ 1.975223] libata version 3.00 loaded. [ 2.074788] Floppy drive(s): fd0 is 1.44M [ 2.117926] FDC 0 is a post-1991 82077 [ 27.013986] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [ 27.013989] <Adaptec 2902/04/10/15/20C/30C SCSI adapter> [ 27.013990] aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs [ 27.013992] [ 27.073031] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 27.181849] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fac00000-fac007ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 27.241519] sata_via 0000:00:0f.0: version 2.3 [ 27.241519] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 [ 27.257262] sata_via 0000:00:0f.0: routed to hard irq line 10 [ 27.274953] scsi1 : sata_via [ 27.290730] scsi2 : sata_via [ 27.305934] ata1: SATA max UDMA/133 cmd 0xd000 ctl 0xc800 bmdma 0xb800 irq 20 [ 27.321432] ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb808 irq 20 [ 27.529140] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 27.748140] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 27.792049] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 27.807835] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 27.824010] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 27.839432] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400 [ 27.860975] usb usb1: configuration #1 chosen from 1 choice [ 27.876920] hub 1-0:1.0: USB hub found [ 27.896402] hub 1-0:1.0: 2 ports detected [ 28.013036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 28.081058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 28.101055] usb usb1: Product: UHCI Host Controller [ 28.101055] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 28.101055] usb usb1: SerialNumber: 0000:00:10.0 [ 28.101098] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 [ 28.101098] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 28.101098] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 28.101098] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800 [ 28.101098] usb usb2: configuration #1 chosen from 1 choice [ 28.101098] hub 2-0:1.0: USB hub found [ 28.101098] hub 2-0:1.0: 2 ports detected [ 28.203170] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 28.203173] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 28.203175] usb usb2: Product: UHCI Host Controller [ 28.203177] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 28.203179] usb usb2: SerialNumber: 0000:00:10.1 [ 28.255803] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 [ 28.255818] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 28.255865] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 28.255891] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000 [ 28.255984] usb usb3: configuration #1 chosen from 1 choice [ 28.256009] hub 3-0:1.0: USB hub found [ 28.256016] hub 3-0:1.0: 2 ports detected [ 28.357249] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 28.357252] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 28.357255] usb usb3: Product: UHCI Host Controller [ 28.357256] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 28.357258] usb usb3: SerialNumber: 0000:00:10.2 [ 28.357325] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 28.357336] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 28.357362] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 28.357386] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400 [ 28.357463] usb usb4: configuration #1 chosen from 1 choice [ 28.357489] hub 4-0:1.0: USB hub found [ 28.357497] hub 4-0:1.0: 2 ports detected [ 28.461175] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 28.461177] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 28.461179] usb usb4: Product: UHCI Host Controller [ 28.461181] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 28.461182] usb usb4: SerialNumber: 0000:00:10.3 [ 28.461236] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 28.461249] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 28.461268] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 28.461300] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfae00000 [ 28.473109] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 28.473157] usb usb5: configuration #1 chosen from 1 choice [ 28.473181] hub 5-0:1.0: USB hub found [ 28.473188] hub 5-0:1.0: 8 ports detected [ 28.577215] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 28.577218] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 28.577220] usb usb5: Product: EHCI Host Controller [ 28.577222] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd [ 28.577224] usb usb5: SerialNumber: 0000:00:10.4 [ 28.627135] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0001990000074987] [ 28.873705] Uniform Multi-Platform E-IDE driver [ 28.930066] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 28.961155] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:0f.1 [ 28.973900] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 [ 28.989145] VP_IDE: not 100% native mode: will probe irqs later [ 29.003591] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 29.017901] ide0: BM-DMA at 0xfc00-0xfc07 [ 29.032489] ide1: BM-DMA at 0xfc08-0xfc0f [ 29.046999] Probing IDE interface ide0... [ 29.462851] hda: SAMSUNG SP1203N, ATA DISK drive [ 29.708323] irq 21: nobody cared (try booting with the "irqpoll" option) [ 29.708323] Pid: 0, comm: swapper Not tainted 2.6.26-1-686 #1 [ 29.708323] [<c015260f>] __report_bad_irq+0x24/0x69 [ 29.708323] [<c0152616>] __report_bad_irq+0x2b/0x69 [ 29.708323] [<c0152828>] note_interrupt+0x1d4/0x208 [ 29.708323] [<c0151dd6>] handle_IRQ_event+0x23/0x51 [ 29.708323] [<c0152ee9>] handle_fasteoi_irq+0x85/0xa4 [ 29.764226] usb 5-4: new high speed USB device using ehci_hcd and address 2 [ 29.772203] [<c0105f3a>] do_IRQ+0x4d/0x63 [ 29.772203] [<c0102656>] default_idle+0x0/0x53 [ 29.772203] [<c01042a7>] common_interrupt+0x23/0x28 [ 29.772203] [<c0102656>] default_idle+0x0/0x53 [ 29.772203] [<c0114d00>] native_safe_halt+0x2/0x3 [ 29.772203] [<c0102683>] default_idle+0x2d/0x53 [ 29.772203] [<c01025ce>] cpu_idle+0xab/0xcb [ 29.772203] ======================= [ 29.772203] handlers: [ 29.772203] [<f8bc407f>] (usb_hcd_irq+0x0/0x73 [usbcore]) [ 29.772203] [<f8bc407f>] (usb_hcd_irq+0x0/0x73 [usbcore]) [ 29.772203] [<f8bc407f>] (usb_hcd_irq+0x0/0x73 [usbcore]) [ 29.772203] [<f8bc407f>] (usb_hcd_irq+0x0/0x73 [usbcore]) [ 29.772203] [<f8bc407f>] (usb_hcd_irq+0x0/0x73 [usbcore]) [ 29.772203] Disabling IRQ #21 [ 30.162257] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 30.162334] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33 [ 30.341213] hda: UDMA/33 mode selected [ 30.353527] Probing IDE interface ide1... [ 30.776532] hdc: Maxtor 6Y080L0, ATA DISK drive [ 31.312351] hdd: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive [ 31.392664] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 31.392777] hdc: UDMA/133 mode selected [ 31.488378] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 31.504250] hdd: UDMA/33 mode selected [ 31.517031] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 31.531075] ide1 at 0x170-0x177,0x376 on irq 15 [ 31.563924] hda: max request size: 512KiB [ 31.577256] hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63 [ 31.595715] hda: cache flushes supported [ 31.603758] hda: hda1 hda2 hda3 [ 31.621035] hdc: max request size: 128KiB [ 31.635931] hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63 [ 31.648902] hdc: cache flushes supported [ 31.659461] hdc: hdc1 hdc2 < hdc5 > hdc3 hdc4 [ 31.720846] hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 31.732965] Uniform CD-ROM driver Revision: 3.20 [ 32.113279] EXT3-fs: INFO: recovery required on readonly filesystem. [ 32.125093] EXT3-fs: write access will be enabled during recovery. [ 32.239141] kjournald starting. Commit interval 5 seconds [ 32.239141] EXT3-fs: hdc3: orphan cleanup on readonly fs [ 32.239141] ext3_orphan_cleanup: deleting unreferenced inode 764070 [ 32.239141] ext3_orphan_cleanup: deleting unreferenced inode 764069 [ 32.239141] ext3_orphan_cleanup: deleting unreferenced inode 764074 [ 32.239141] EXT3-fs: hdc3: 3 orphan inodes deleted [ 32.239141] EXT3-fs: recovery complete. [ 32.299258] EXT3-fs: mounted filesystem with ordered data mode. [ 35.315837] udevd version 125 started [ 35.788832] udev: renamed network interface eth0 to eth1 [ 36.229015] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 36.429122] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 36.522513] input: Power Button (FF) as /class/input/input1 [ 36.562775] Linux agpgart interface v0.103 [ 36.604725] ACPI: Power Button (FF) [PWRF] [ 36.618577] input: Power Button (CM) as /class/input/input2 [ 36.655870] agpgart: Detected AGP bridge 0 [ 36.684553] agpgart: AGP aperture is 128M @ 0xe0000000 [ 36.732476] ACPI: Power Button (CM) [PWRB] [ 36.748413] input: Sleep Button (CM) as /class/input/input3 [ 36.823281] ACPI: Sleep Button (CM) [SLPB] [ 37.274707] input: PC Speaker as /class/input/input4 [ 37.360802] Linux video capture interface: v2.00 [ 37.476733] saa7130/34: v4l2 driver version 0.2.14 loaded [ 37.495979] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 37.510912] saa7133[0]: found at 0000:00:09.0, rev: 209, irq: 20, latency: 64, mmio: 0xfa800000 [ 37.526913] saa7133[0]: subsystem: 0070:6700, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,insmod option] [ 37.542569] saa7133[0]: board init: gpio is 400000 [ 37.668529] bttv: driver version 0.9.17 loaded [ 37.684309] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 37.746369] saa7133[0]: i2c eeprom 00: 70 00 00 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 37.766167] saa7133[0]: i2c eeprom 10: ff ff ff 08 ff 20 ff ff ff ff ff ff ff ff ff ff [ 37.782284] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 ff 01 33 88 ff 00 a1 ff ff ff ff [ 37.798379] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 37.814427] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff [ 37.830271] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 37.845948] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 37.861460] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 37.876665] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 bb 17 17 f0 73 05 29 00 [ 37.889246] saa7133[0]: i2c eeprom 90: 84 08 00 06 0f 08 01 00 94 18 89 72 07 70 73 09 [ 37.904266] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 10 01 72 11 ff 79 [ 37.919177] saa7133[0]: i2c eeprom b0: 43 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 37.933646] saa7133[0]: i2c eeprom c0: 84 09 00 04 20 77 00 40 bb 17 17 f0 73 05 29 00 [ 37.948377] saa7133[0]: i2c eeprom d0: 84 08 00 06 0f 08 01 00 94 18 89 72 07 70 73 09 [ 37.962487] saa7133[0]: i2c eeprom e0: 23 5f 73 0a fc 72 72 0b 2f 72 10 01 72 11 ff 79 [ 37.976766] saa7133[0]: i2c eeprom f0: 43 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 38.078253] input: PS2++ Logitech Wheel Mouse as /class/input/input5 [ 38.134595] tuner' 1-004b: chip found @ 0x96 (saa7133[0]) [ 38.162598] tveeprom 1-0050: Hauppauge model 67599, rev B1B4, serial# 1513403 [ 38.181272] parport_pc 00:08: reported by Plug and Play ACPI [ 38.181272] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE] [ 38.216910] tveeprom 1-0050: MAC address is 00-0D-FE-17-17-BB [ 38.231155] tveeprom 1-0050: tuner model is Philips 8275A (idx 114, type 4) [ 38.247162] tveeprom 1-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc) [ 38.261489] tveeprom 1-0050: audio processor is SAA7131 (idx 41) [ 38.275909] tveeprom 1-0050: decoder processor is SAA7131 (idx 35) [ 38.290628] tveeprom 1-0050: has no radio, has no IR receiver, has no IR transmitter [ 38.305073] saa7133[0]: hauppauge eeprom: model=67599 [ 38.428310] tda829x 1-004b: setting tuner address to 61 [ 38.542420] tda829x 1-004b: type set to tda8290+75a [ 42.534109] saa7133[0]: registered device video1 [v4l2] [ 42.548326] saa7133[0]: registered device vbi1 [ 42.696877] saa7133[0]: registered device radio1 [ 42.779436] bttv: Bt8xx card found (0). [ 42.792149] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 42.805983] bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq: 18, latency: 64, mmio: 0xefe00000 [ 42.821998] bttv0: using: Eagle Wireless Capricorn2 (bt878A) [card=51,insmod option] [ 42.836075] bttv0: gpio: en=00000000, out=00000000 in=003fffff [init] [ 42.874180] All bytes are equal. It is not a TEA5767 [ 42.886233] tuner' 2-0060: chip found @ 0xc0 (bt878 #0 [sw]) [ 42.908614] bttv0: tuner type=5 [ 42.947379] tuner-simple 2-0060: creating new instance [ 42.962609] tuner-simple 2-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 42.979144] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 42.992843] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 43.007076] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 43.032542] bttv0: registered device video0 [ 43.045191] bttv0: registered device vbi0 [ 43.058010] bttv0: registered device radio0 [ 43.070522] bttv0: PLL: 28636363 => 35468950 .. ok [ 43.127354] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 [ 43.140673] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 43.298775] DVB: registering new adapter (saa7133[0]) [ 43.310922] DVB: registering frontend 0 (Philips TDA10046H DVB-T)... [ 43.393772] tda1004x: setting up plls for 48MHz sampling clock [ 43.715655] tda1004x: found firmware revision 20 -- ok [ 43.726241] irq 22: nobody cared (try booting with the "irqpoll" option) [ 43.726241] Pid: 1827, comm: modprobe Not tainted 2.6.26-1-686 #1 [ 43.726241] [<c015260f>] __report_bad_irq+0x24/0x69 [ 43.726241] [<c0152616>] __report_bad_irq+0x2b/0x69 [ 43.726241] [<c0152828>] note_interrupt+0x1d4/0x208 [ 43.726241] [<c0151dd6>] handle_IRQ_event+0x23/0x51 [ 43.726241] [<c0152ee9>] handle_fasteoi_irq+0x85/0xa4 [ 43.726241] [<c0105f3a>] do_IRQ+0x4d/0x63 [ 43.726241] [<c01042a7>] common_interrupt+0x23/0x28 [ 43.726241] [<c01e1353>] delay_tsc+0x45/0x7d [ 43.726241] [<c01e12e5>] __delay+0x6/0x7 [ 43.726241] [<f8d25cf9>] i2c_is_busy_wait+0x5a/0x65 [saa7134] [ 43.726241] [<f8d2648d>] saa7134_i2c_xfer+0x583/0x75e [saa7134] [ 43.726241] [<f8c67206>] i2c_transfer+0x5c/0x6d [i2c_core] [ 43.726241] [<f8df70a3>] tda1004x_read_byte+0x81/0xdd [tda1004x] [ 43.726241] [<f8df7657>] tda1004x_write_mask+0x35/0x59 [tda1004x] [ 43.726241] [<f8df7d3e>] tda10046_init+0x330/0x525 [tda1004x] [ 43.726241] [<f8df2a26>] dvb_init+0x1190/0x12ef [saa7134_dvb] [ 43.726241] [<c01042a7>] common_interrupt+0x23/0x28 [ 43.726241] [<f8d24d72>] mpeg_ops_attach+0x28/0x35 [saa7134] [ 43.726241] [<f8d2572b>] saa7134_ts_register+0x1f/0x58 [saa7134] [ 43.726241] [<c013f3d4>] sys_init_module+0x184b/0x19bb [ 43.726241] [<c0151dd6>] handle_IRQ_event+0x23/0x51 [ 43.726241] [<c0152eff>] handle_fasteoi_irq+0x9b/0xa4 [ 43.726241] [<c0166181>] vma_link+0xa3/0xbd [ 43.726241] [<c0129a6d>] msleep+0x0/0x12 [ 43.726241] [<f8dc5db4>] snd_via8233_interrupt+0x17/0xcb [snd_via82xx] [ 43.726241] [<c0166be0>] do_mmap_pgoff+0x266/0x2b9 [ 43.726241] [<c0103853>] sysenter_past_esp+0x78/0xb1 [ 43.726241] ======================= [ 43.726241] handlers: [ 43.726241] [<f8dc5d9d>] (snd_via8233_interrupt+0x0/0xcb [snd_via82xx]) [ 43.726241] Disabling IRQ #22 [ 44.676836] Error: Driver 'pcspkr' is already registered, aborting... [ 44.594274] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001) [ 44.594274] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 22 [ 44.594275] saa7134 ALSA driver for DMA sound loaded [ 45.030999] saa7133[0]/alsa: saa7133[0] at 0xfa800000 irq 20 registered as card -1 [ 45.217690] irq 22: nobody cared (try booting with the "irqpoll" option) [ 45.228670] Pid: 0, comm: swapper Not tainted 2.6.26-1-686 #1 [ 45.228670] [<c015260f>] __report_bad_irq+0x24/0x69 [ 45.228670] [<c0152616>] __report_bad_irq+0x2b/0x69 [ 45.228670] [<c0152828>] note_interrupt+0x1d4/0x208 [ 45.228670] [<c0151dd6>] handle_IRQ_event+0x23/0x51 [ 45.228670] [<c0152ee9>] handle_fasteoi_irq+0x85/0xa4 [ 45.228670] [<c0105f3a>] do_IRQ+0x4d/0x63 [ 45.228670] [<c0102656>] default_idle+0x0/0x53 [ 45.228670] [<c01042a7>] common_interrupt+0x23/0x28 [ 45.228670] [<c0102656>] default_idle+0x0/0x53 [ 45.228670] [<c0114d00>] native_safe_halt+0x2/0x3 [ 45.228670] [<c0102683>] default_idle+0x2d/0x53 [ 45.228670] [<c01025ce>] cpu_idle+0xab/0xcb [ 45.228670] ======================= [ 45.228670] handlers: [ 45.228670] [<f8dc5d9d>] (snd_via8233_interrupt+0x0/0xcb [snd_via82xx]) [ 45.228670] [<f8dcc4c4>] (snd_via82xx_interrupt+0x0/0x84 [snd_via82xx_modem]) [ 45.228670] Disabling IRQ #22 [ 45.668693] PCI: Setting latency timer of device 0000:00:11.6 to 64 [ 46.198160] ACPI: PCI interrupt for device 0000:00:11.6 disabled [ 46.210223] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 [ 47.206713] Adding 995988k swap on /dev/hdc1. Priority:-1 extents:1 across:995988k [ 47.613963] EXT3 FS on hdc3, internal journal [ 47.700684] usb 5-4: device not accepting address 2, error -110 [ 47.736050] loop: module loaded [ 47.832839] usb 5-4: new high speed USB device using ehci_hcd and address 3 [ 47.862091] w83627hf: Found W83627THF chip at 0x290 [ 47.879343] w83627hf w83627hf.656: Reading VID from GPIO5 [ 48.853083] device-mapper: uevent: version 1.0.3 [ 48.873080] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx [ 49.003492] kjournald starting. Commit interval 5 seconds [ 49.007386] EXT3 FS on hdc5, internal journal [ 49.007386] EXT3-fs: mounted filesystem with ordered data mode. [ 49.181138] fuse init (API version 7.9) [ 49.580414] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 49.638498] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 49.713172] ReiserFS: hdc4: found reiserfs format "3.6" with standard journal [ 49.728140] ReiserFS: hdc4: using ordered data mode [ 49.760553] ReiserFS: hdc4: journal params: device hdc4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 49.792014] ReiserFS: hdc4: checking transaction log (hdc4) [ 49.825401] ReiserFS: hdc4: replayed 2 transactions in 0 seconds [ 49.871351] ReiserFS: hdc4: Using r5 hash to sort names [ 64.291053] usb 5-4: device not accepting address 3, error -110 [ 64.419576] usb 5-4: new high speed USB device using ehci_hcd and address 4 [ 76.345614] usb 5-4: device not accepting address 4, error -110 [ 76.473940] usb 5-4: new high speed USB device using ehci_hcd and address 5 [ 89.294722] usb 5-4: device not accepting address 5, error -110 [ 89.311147] hub 5-0:1.0: unable to enumerate USB device on port 4 [ 89.706308] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 90.862637] usb 2-2: not running at top speed; connect to a high speed hub [ 94.090649] usb 2-2: configuration #1 chosen from 1 choice [ 94.390448] usb 2-2: New USB device found, idVendor=04b8, idProduct=0007 [ 94.407852] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 94.424609] usb 2-2: Product: USB2.0 Printer [ 94.444609] usb 2-2: Manufacturer: EPSON [ 94.463008] usb 2-2: SerialNumber: 573137503346A7D2AD [ 95.169059] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0007 [ 95.189441] usbcore: registered new interface driver usblp [ 99.614906] ip_tables: (C) 2000-2006 Netfilter Core Team [ 99.895252] skge eth1: enabling interface [ 99.941756] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 103.413205] skge eth1: Link is up at 100 Mbps, full duplex, flow control none [ 108.066072] NET: Registered protocol family 10 [ 108.081147] lo: Disabled Privacy Extensions [ 110.974251] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 111.022586] DROPPED IN= OUT=eth1 SRC=10.0.0.9 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2 [ 111.110876] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=254 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=234 [ 111.380555] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=254 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=234 [ 111.685058] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=254 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=234 [ 111.889188] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=236 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=216 [ 111.995622] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=136 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=116 [ 112.258431] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=136 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=116 [ 112.521267] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=136 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=116 [ 112.721526] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=225 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=205 [ 112.968213] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=192 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=172 [ 113.797760] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=225 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=205 [ 115.226866] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=236 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=216 [ 116.054414] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=225 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=205 [ 117.699472] DROPPED IN= OUT=eth1 SRC=10.0.0.9 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2 [ 119.583999] eth1: no IPv6 routers present [ 120.427777] lp0: using parport0 (interrupt-driven). [ 120.474950] ppdev: user-space parallel port driver [ 123.473448] DROPPED IN= OUT=eth1 SRC=10.0.0.9 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2 [ 123.613675] DROPPED IN= OUT=eth1 SRC=10.0.0.9 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF OPT (94040000) PROTO=2 [ 123.821754] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=222 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=202 [ 123.873795] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=141 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=121 [ 124.082551] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=222 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=202 [ 124.363721] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=222 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=202 [ 124.576518] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=204 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=184 [ 125.755168] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=204 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=184 [ 125.936703] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=178 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=158 [ 126.193015] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=178 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=158 [ 126.454230] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=178 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=158 [ 126.654724] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=166 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=146 [ 127.177294] nvidia: module license 'NVIDIA' taints kernel. [ 127.296304] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=225 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=205 [ 127.436099] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 127.436099] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun 4 23:43:17 PDT 2008 [ 127.575459] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 127.575475] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 127.575564] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 127.840722] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=166 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=146 [ 127.944300] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=204 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=184 [ 130.027059] DROPPED IN=eth1 OUT= MAC= SRC=10.0.0.9 DST=224.0.0.251 LEN=166 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=146 [ 134.869445] eth1: no IPv6 routers present
Dec 9 23:32:28 debian kernel: [ 1534.208514] ACPI: PCI interrupt for device 0000:00:11.5 disabled Dec 9 23:32:52 debian kernel: [ 1559.756213] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22 Dec 9 23:32:53 debian kernel: [ 1560.376212] Pid: 3646, comm: hald Tainted: P 2.6.26-1-686 #1 Dec 9 23:32:53 debian kernel: [ 1560.376216] [<c015260f>] __report_bad_irq+0x24/0x69 Dec 9 23:32:53 debian kernel: [ 1560.376251] [<c0152616>] __report_bad_irq+0x2b/0x69 Dec 9 23:32:53 debian kernel: [ 1560.376262] [<c0152828>] note_interrupt+0x1d4/0x208 Dec 9 23:32:53 debian kernel: [ 1560.376287] [<c0151dd6>] handle_IRQ_event+0x23/0x51 Dec 9 23:32:53 debian kernel: [ 1560.376314] [<c0152ee9>] handle_fasteoi_irq+0x85/0xa4 Dec 9 23:32:53 debian kernel: [ 1560.376339] [<c0105f3a>] do_IRQ+0x4d/0x63 Dec 9 23:32:53 debian kernel: [ 1560.376366] [<c01042a7>] common_interrupt+0x23/0x28 Dec 9 23:32:53 debian kernel: [ 1560.376437] [<f8c633e3>] ide_inb+0x3/0x7 [ide_core] Dec 9 23:32:53 debian kernel: [ 1560.376472] [<f8c68390>] ide_dma_intr+0x21/0x79 [ide_core] Dec 9 23:32:53 debian kernel: [ 1560.376493] [<f8c6836f>] ide_dma_intr+0x0/0x79 [ide_core] Dec 9 23:32:53 debian kernel: [ 1560.376525] [<f8c6303a>] ide_intr+0x140/0x19b [ide_core] Dec 9 23:32:53 debian kernel: [ 1560.376566] [<c0151dd6>] handle_IRQ_event+0x23/0x51 Dec 9 23:32:53 debian kernel: [ 1560.376590] [<c0152fc7>] handle_edge_irq+0xbf/0xfa Dec 9 23:32:53 debian kernel: [ 1560.376613] [<c0105f3a>] do_IRQ+0x4d/0x63 Dec 9 23:32:53 debian kernel: [ 1560.376636] [<c01042a7>] common_interrupt+0x23/0x28 Dec 9 23:32:53 debian kernel: [ 1560.376731] =======================
------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
_______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
